I have an application that has a load of values in its app.exe.config file. The application is used by a few users, and the settings would change on a regular basis. so im having to change the config file, and send it out to all users.
I'd love to move the config file to the network somewhere and point the app to this file. ive tried to use;
My application is a service application, and it needs to load a set of configuration that the user can change. I was using the System.Configuration classes to set up the app.config file, and then I was going to give the user the option of editing this file to change configuration.
Can I move this file to a custom directory, something like C:settingsapp.config? Or is it forced to reside in the app directory?
Im trying to make a program that works a bit like the log in on a computer. But i cant make it load a different .config file depending on what username is used. I want it to load a config file from different directories that match the username. eg if the username was bob then it could be: C:MyProgramLoginBobapp.config I've been teaching myself and this has had me stuck for ages.
I made a project in VB.NET 2008. When I update my project I change the assembly version but the problem is that when the user gets the new version they lose their user settings.[code]Note the version number in the path. Is there any way save in a location not affected by changing the version?
I'm looking for a way to specify the location for the User.config file that is used for storing the My.Settings object. It appears that this is not possible. The problem for me is, I don't want to be responsible for creating several different files on the users computer that really have no use and are difficult to find and clean once an update is released. For most users, this is not a serious problem, as many will probably never update the software, and most will probably only go through a couple of updates. On my system, there are config files for every build of the application, and the same to a lesser extent will be true for my beta testers.
I can understand that MS wants to make sure that no two applications will use the same location for storing application data, but a simple [UserData] [CompanyName][ApplicationName] for storing application data will probably suffice for 99.9999 percent of the legitimate applications in the world. Bogging a user's system down with erroneous files, no matter how small, is an unnecessary drain on system resources and a potential source of problems for the user. It's bad enough that most programs leave bits and pieces of themselves all over a user's system after De-installation - this to me seems only to exaggerate this problem.
Is the only way to get around this problem to write a whole new Settings Class? Is there a way to change the location of the UserConfig file to a more friendly (and more predictable) location that I am not finding for myself? It would seem that having at least the OPTION to specify a location for the User.Config file would be OBVIOUS and easy to implement, so why did they leave this out?
I am just not happy with the fact that the user.config file gtets saved in the user's account folder. Is there a way to save it in the Application's Startup Folder instead? I couldn't find any configuration properties within the PROJECT PROPERTIES which would let me change the file location.
I am creating a windows service in VS2010, and in order to store a user's input during installation I've been told to write it to a file called app.config.However i cannot find this app.config file? Does it create one in a windows service project? or just in a WCF windows service project?
Environment: .Net 3.5 VB.net (C#ok too) I wrote a multi-project WinForms app that needs to load a couple dozen variables from a client section of a config file based on user's selection of client. Also some program variables need to be loaded as well. So far so good, I put them in an app.config file.In the appsettings section I put the main program variables. e.g.
I am trying to build custom configuration section in my app.config file. I am using the following as my example: [URL]. According to this article, I am supposed to inherit from the ConfigurationSection class, add the desired section to my app.config file, and then specify a "configSections" declaration in the app.config file to identify the section and the class that should process it. My problem is that I cannot get the class loader to load my class for processing the section.
If I follow the example and set up my "configSections" as: <configSections> <section name="MyStuff.Configuration" type="MyStuff.MyConfigurer" allowLocation="true" allowDefinition="Everywhere" /> </configSections>
I get the following error: Could not load type 'MyStuff.MyConfigurer' from assembly 'System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'.
I think the error is telling me it can't load my class from the System.Configuration DLL and that makes sense; the class is in my application code. So how do I tell it to look in my application code to find the class? Do I have to put my class in its own DLL to get this to work? As an alternative approach, is there some way I can just find the section in the application configuration and process the XML myself? The app.config file is the ideal location for this information. Also, this would be easier for me than going through all of these contortions to do what should be a relatively easy operation.
Don't know if this is possible, but I'd like a config section to be generated when another developer adds my dll to their project. This way they don't have to look up in code or a doc as to what they need to put in their config file.
I am building the 'TheBeerHouse' project in vb.net (the book is written in C#). Once I understand the concepts, I can usually convert it to vb. However, there are a few areas that give my some problems (which I will address individually). The first issue I have is the C# 'base' to VB 'MyBase'. [code] My understanding of this conversion is that I need to grab the attributes of the <articles> element under the <theBeerHouse> custom section in the web.config file.This code does not compile and the get the following error: 'MyBase' must be followed by '.' and an identifier.
I would like to be able to specify exactly where the My.Settings file gets saved. It bugs me how it gets saved off in the middle of appsettings nowhere, and I would prefer it gets saved where the executable is. If anyone knows how to do this, that would be great. (P.S; I'm using VB.Net.)
I've just started using user settings. This works ok however I'm having problems with the location of user.config.
When I run the project in Studio, user.config seems to be stored in a different place than when I build the project.
In fact every time I build it the location seems to change - users therefore lose their settings every time the project is built, which seems pretty useless.
the My.Settings data is saved in the AppDataLocal folder for a user based on company.Then, inside the company folder there will be a folder for any applications published by that company, which contain the user.config file for that program.
C:Documents and SettingsRobert BurkeLocal SettingsApplication DataSerysoftSysPad.exe_Url_qr40iotmbi1lvvl4b5lecnfpoqogr5uw
The thing is, the folder for each program has a string of random alphanumeric characters at the end. I noticed that on both my XP and Win7 machine, the string is the same. What I am wanting to do is save the user.config file, but the only way to do this, seemingly, would be to hardcode that folder into the path to get the user.config file from.
how that string is generated, and what may possibly cause it to change in other releases even though, so far, it has stayed the same for several of my releases. I don't want to release a version one day and the string change and then it break my program.
Is it possible to have location authorization nodes in a web.config be external?
Such that I could take all of the nodes simlar to
[Code]...
And move them outside of the web.config or something simlar? I find these nodes at an extreme amount of noise to a web.config when they're relatively static. Normally my approach would be to config source something like this but since it falls under the root node I'm not sure of it's possible with these nodes.
I am currently working on a game that I want to add squirrels running around at random for me to kick off the form. Ex.. picturebox.location=200,200 And I set a new location for it, as 5,5, how can iIget the picturebox to move to that coordinate, a few pixels at a time until it gets there, so it looks like my squirrel is running to that location?
I have created Custom .NET controls, and I'd like to know if it's possible, how to add a custom attribute in the web.config when you add the reference to the control.
Currently it is: <controls> <add tagPrefix="FOO" src="~/Controls/FooControl.ascx" tagName="Bar" />
I have an app.config file that stores values in a few different sections. I have these snippets:[code]How do I read the connection string in the codebehind? Specifically the value which is [code]
I have some custom user controls (asp.net) that is loaded via a configuration file this works great..
Problem - Some of these user controls I made you set some parameters.
Example - oUCtrl = page.LoadControl("UserControls/" & oCtrlNode.Attributes("name").Value & ".ascx")
This loads the control.. now that node has more attributes.. example url="www.google.com" in the config file
<control name="RSSFeed" url="www.google.com"> To set the url on the control it would be oUCtrl.url = "www.google.com"
is there a way to enumerate the properties of a user control or a way to use something to eval a string like eval("oUctrl." & currentAttributeName & "=" currentAttributeValue)
Not sure the best way.. i would assume the best way would enumerate the public properties of the user control and compare against it.
i made a little from control which hold 3 button controls lined, in the designer they're all lined up perfectly but when i built and ran the application the middle button shift a bit to the left and overlap the left control, someone has any idea why its happen ?
I'm new on VB.Net.When I move my Form,it changes my picture location automatically so i can not Get pixel value correctly and it gives me Error.[code]...
How can I move the mouse to a pixel location of a program?[code]I know it doesn't work, but I'm trying to make it easier to understand what I'm trying to do.
im still fairly new to this. i have written a program, built it and created my setup project and can install it no problems, however, in the "setup view" where you have the threefolders "Application folder" "Users Desktop" and "Users Programs menu" ... u know "the file system view/setup1" ... well here is the problem, i click on "Application folder" and change the "default location" ... so i can specify the program is installed in "C:ProgramFilesJohns AppCalculator" ...... BUT when i build the setup and install the program it does not appear in this location !! arghh i can see all the program files on my pc ... except mine ( i have tried all day and all night the only way i can get it to appear here is by INCLUDING the "project output" into THIS folder ..... even though i only want it to be on the "users desktop" ....
I have the following code, which I use for in another control and it works fine, although the other control is a custom control that inherits from Control.
Public Class MoveableLabel Inherits Label Const WM_NCHITTEST As Integer = &H84 Const HTCLIENT As Integer = &H1 Const HTCAPTION As Integer = &H2 [Code] .....
Wondering if its possible to move the tabrect areas? For example:
[Code]....
I can already paint the tabs to the new location, but not sure if I have to override onmousedown or onmouseclick or what to have the tab selection area match up with the new painting. I haven't found any example of what I am wanting to do.
