i'm getting confuse about dataset and dataview, which i either use dataset to update data or dataview to filter data, but cannot have both together at the same time. Private Sub searchStaff_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
i'm getting confuse about dataset and dataview, which i either use dataset to update data or dataview to filter data, but cannot have both together at the same time.
Private Sub searchStaff_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
ds = New DataSet[code]...
how to i can have both functions"update,filter" at the same time by using what method?
My problem is once I filter my datagridview I cant seem to be able to update the database. The error I get is Concurrency violation: the Update Command affected 0 of the expected 1 records. Why is it that I cant update after i filter????
View 1 RepliesI'm having problems with bindingsource. I have a proc used to update a datagridview from a bindingsource. When I run the debugger, the datatable appears to be populated rowcount is 2206 and 7 columns. When the bindingsource.datasource is set, everything looks good. The filter appears to be ok, however, when the datagridview is set to the bindingsource, it's not working. I have it in a try/catch block and an error isn't being raised. When I reference the columns to size them, an error is raised. Below is the snippet of
[Code]...
I have a CombBox and a data grid view on a form, when the form loads, the data grid view is loaded with data from the database. I want to filter that data with a selection from the combobox (which is loaded with data from another database). The code i have is as follows:
ContactsBindingSource.Filter = "Company Like '%" & Me.cmbSelectCompany.Text & "%'"but when I select an option from the drop down list the DGV gets cleared down as if my selection has no equivilant data in teh DGV.
I have a CombBox and a data grid view on a form, when the form loads, the data grid view is loaded with data from the database. I want to filter that data with a selection from the combobox (which is loaded with data from another database). The code i have is as follows: ContactsBindingSource.Filter = "Company Like '%" & Me.cmbSelectCompany.Text & "%'" but when I select an option from the drop down list the DGV gets cleared down as if my selection has no equivilant data in teh DGV.
View 1 RepliesI'm working with payroll application and I need data grid to view dates from 1/1/2011 to 31/1/2011 and this dates should be change by textboxs out of data grid to choose from where to start and when will end I mean he may change it to 1/1/2011 to 12/1/2011 so the first column will be the dates also second column will be if it is friday or Monday etc. Then 3rd column will be get from sql database table the time of check in and we will use this query.
"SELECT * FROM Transactions WHERE Date LIKE '%" & column1.Text & "%' and EmpID like '%" & TextBox1.Text & "%' and In like '%" & "2" & "%'"
And this number it the end of code will change to 0 and 1 and 3 to get the 4th column and 5th column etc. then next column will subtract time that will be shown in previous columns with times in labels that I'm already got from another table.
I have a dataset along with code for validation. When I use a datagridview and setting the EditMode to OnEnter I get the red exclamations telling me that I have an error when this is needed. This works all good. when I click the save button on the BindingNavigator, the application saves the record even when this validation is showing. How do I filter up this validation code through a datagridview and stop the program saving the data? If you need the code for more information, I will add this to the forum.
View 2 RepliesIn my datagridview there are two dependent columns, one is category and the other is items. So I want to filter my item column list as per selected category. But the problem is that when I change the category wise data to datasource of items combobox, previous selected items names disappear because previous items is not in current datasource.
View 1 RepliesI want to filter a text in all columns in a datagridview. So I use Like % in the filter text. However, I found that the text(strFilter in my code) may contain % sometimes. So it have a syntax error. How can I use filter with like clause when the filter text contains %?
Private Sub PassFilter(ByRef dataTable As DataTable, ByVal strFilter As String)
Try
Dim dataview As DataView = dataTable.DefaultView
[Code].....
i want to update data in database using datagridview actually i am displaying the data in datagridview and after that i want to update some rows data directly modifying the displayed data into the datagridview
how can be done like this
My datagridview is displaying records from table in database.When I go to add a new record the 'pencil' icon does not appear so when I click on save button update to database table does not take place.code behind save button is
BindingContext(TheatreBindingSource).EndCurrentEdit()
PatientTableAdapter.Update(TheatreDataSet)
PatientTableAdapter.Connection.Close()
i have spent all day trying to sort this ...any ideas and yes my theatrebindsource.allownew is set to true
I have this
[Code]...
which is supposed to get all the data from my table and set it as the datasource of a DataGridView. You can see where I put in two msgbox's to view how many columns are in the DGV before and after the "update". The first count gives me 22, which is the correct number. After the .DataSource and .DataMember lines are ran, the count jumps to 41 and I have no clue why. All I want to do is clear a dataset, fill it with the new data and set it as the data source of a datagridview. It appears the info is being saved to the table correctly too.
How to update data in a table bound to a datagridview? Using Visual Basic 8.
View 1 RepliesHow to Insert, Delete and Update Data in a Datagridview using MySql as the database? There is a textboxes and button that adds data in the database and i want it to be refresh the datagridview.
View 3 RepliesI have built a dataview where i display data information from tables which was created in MySQL. Can i update the datagrid cells by just clicking it and entering new information ? By updating the datagrid cells, will it automatically the relevant database tables ? If yes, how do i go about writing codes. All the cells now just consist of text format data.
View 11 Repliesmy chart loads data from a datagridview. how can i automatically update my chart with new data if new values are inserted into the datagridview.
[Code]...
I have a datagridview which is populated from a database. I have added buttons to this to edit, view, delete. For some reason using the edit button and updating the database my grid fails to respond. I have it set up to display an image based on the row I click on. Before the update this works, after is does not. After the update I run a reload() where I clear out the dataset and repopulate the datagridview. Here is the code I am using for the reload and the update.
Public Sub reloadDG()
'reloadDG is used to clean out the information currently in the datagridview and is replaced with
'current data
'calls refreshForm()
[code]....
All I want is to update the selected row data in form1 to another form2
Form1 Objects
Form1 = MainAppForm
DataGridView = DGVMain <= binded
Button = btnUpdate
Form2 Objects
Form2 = frmUpdate
Button = btnSubmit
15 textBoxes = you can see its name in the code below and all of them are data binded
MainAppForm Code
Pass the selectedrow data to form2 (frmUpdate)
Private Sub btnUpdateDouble_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnUpdate.Click
If DGVMain.SelectedRows.Count = 1 Then
Try
frmUpdate.ItemIDTextBox.Text = DGVMain.CurrentRow.Cells(0).Value.ToString()
frmUpdate.PartTypeTextBox.Text = DGVMain.CurrentRow.Cells(1).Value.ToString()
frmUpdate.PartNameValueTextBox.Text = DGVMain.CurrentRow.Cells(2).Value.ToString()
frmUpdate.PackageTypeTextBox.Text = DGVMain.CurrentRow.Cells(3).Value.ToString()
frmUpdate.QuantityTextBox.Text = DGVMain.CurrentRow.Cells(4).Value.ToString()
frmUpdate.UnitTextBox.Text = DGVMain.CurrentRow.Cells(5).Value.ToString()
frmUpdate.DescriptionTextBox.Text = DGVMain.CurrentRow.Cells(6).Value.ToString()
frmUpdate.LocationTextBox.Text = DGVMain.CurrentRow.Cells(7).Value.ToString()
frmUpdate.ProjectBoardTextBox.Text = DGVMain.CurrentRow.Cells(8).Value.ToString()
frmUpdate.CommentsTextBox.Text = DGVMain.CurrentRow.Cells(9).Value.ToString()
frmUpdate.OrderCodeTextBox.Text = DGVMain.CurrentRow.Cells(10).Value.ToString()
frmUpdate.CurrencyTextBox.Text = DGVMain.CurrentRow.Cells(11).Value.ToString()
frmUpdate.UnitPriceTextBox.Text = DGVMain.CurrentRow.Cells(12).Value.ToString()
frmUpdate.SupplierTextBox.Text = DGVMain.CurrentRow.Cells(13).Value.ToString()
frmUpdate.ManufacturerTextBox.Text = DGVMain.CurrentRow.Cells(14).Value.ToString()
frmUpdate.Show()
Catch ex As Exception
System.Windows.Forms.MessageBox.Show(ex.Message)
End Try
ElseIf DGVMain.SelectedRows.Count = 0 Then
MsgBox("Please select one item to update!", MsgBoxStyle.Information, "Update")
Else
MsgBox("Updating multiple Items is not allowed!", MsgBoxStyle.Information, "Update")
End If
End Sub
Form2 Code
I want to update the data by this code, but it refresh only the data in Form1
Private Sub btnSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
Me.Validate()
Me.SparePartsBindingSource.EndEdit()
Me.SparePartsTableAdapter.Update(Me.InventoryDBDataSet.SpareParts)
'Refresh
MainAppForm.SparePartsTableAdapter.Fill(MainAppForm.InventoryDBDataSet.SpareParts)
End Sub
No problem in updating the data if I put the code below in Form2 load event
Me.SparePartsTableAdapter.Fill(InventoryDBDataSet.SpareParts)
but the problem is, it will refresh all the data in the Form2, and my code in Form1 becomes useless.
Thanks in advance!
I have a problem that is bugging the hell out of me..... I need to know how to update an access database from an unbound datagridview using vb.net 2008 here is my code but it dont want to work, I need the simplest way.
[Code]...
I am populating a datagridview not with a datatable but with a list of instances of a class I created. The data for the instances is read from a database.
Looks like this:
Public Function GetSecurities() As System.Collections.Generic.List(Of Security)
Dim com As New SqlCommand
Dim rdr As SqlDataReader
[Code]....
currently i had a program which working fine when its running in the solution explorer,but after published,problem comes.my datagridview cant show updated data while my database access already update...my datagridview only show existed data.could it be my datagrid problem?i get my data programmatically or is my INSERT command doesn't update the dataset?but in the solution explorer does show the dataset was updated. [code]
View 3 RepliesI have a form that has a DataGridView named dgvResults on it. When the form is initialized I bind dgvResults to a DataTable named prpResultsTable using a BindingSource named bs. Code shown below:
Public Class frmImportData
Private cv_clsB As clsBatch
Public Sub New(ByRef clsB As clsBatch)[code]....
i need to know how to do add/delete(with conformation before deleting)/update/sorting/filtering/searching data just using bindingnavigator. by default when drag datagridview from datasource, it appaer ontop and having just add/delete/save item. but delete don't have confirmation. click on button add no code behind, delete no code behind.
View 2 RepliesI have a form with a datagridview bound to a database that has recorded who entered data into via the windows user id.I am trying to filter the datagridview to only display records created by the user that is currently logged in.I can get the windows user name with function getusername() which returns a string.
The field that houses the username is "staff_entering_referral"
I am doing this but the datagridview does not update or change.
bindingsource.filter = "staff_entering_referral = '" & getusername & "'"
[code].....
I have been on a database project for a while now. I wanted to be able to make changes to my database using the update command of a Datagridview control.However, I have been faced with a series of unsuccessful outcomes.I want to do this how do I go about it?
[Code]...
I have a DGV to filter and i need the outcome of this as a filter string which i can use to filter my BindingSource:
Try
Using connection As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=D:ProjectMWMachineWaleMachineWaleDatabaseMW.mdf;Integrated Security=True;User Instance=True")
[Code]...
How could I have a datagridview on a form that could be tailored by the user having the options of lower/greater than, equals to/not equals to etc on each column?
View 5 Repliesis there a way to filter my DataGridView?
i have a datagridview with a column name 'Date' and i want to filter it using a datetimepicker.
example: when the value of datetimepicker = "specific date" then the data that will show only in my datagrid is = "specific date".
I'm adding textboxes inside a datagridview to use them to filter the data that is displayed in the grid. Each column has a textbox placed in the header. Everything is fine until the grid has the horizontalscroll visible. The texbox move if the scroll isused but they flicker and if the grid has the rowheader visible the textboxes gets over it. Is there any way to avoid the flicker and a workaround with the rowheader. I don't want to have to hide the rowheader but if there is nothing else that can be done.The class is not finish yet:
Imports System
Imports System.Collections.Generic
Imports System.ComponentModel
[code].....
