I have done some code so that when you choose a number from the numeriupdown it will look at the if statement and put the age into a category. the thing is the number in the updown doesnt go into the right category?
'Assigning Textboxes and Combo Boxes To Memory
lblUsername.Text = Username
strCustomerName = txtCustomerName.Text
intCustomerAge = Val(NumericUpDownAge.Value)
[code]....
I have done some code so that when you choose a number from the numeriupdown it will look at the if statement and put the age into a category. the thing is the number in the updown doesn't go into the right category for me can you see what the problem is? [Code]
View 2 RepliesI have a NumericUpDown control with a range of 10-50 and I want to have the selected number be multiplied by an amount of money to create yearly cost. I dont know, however, how to use inputted data from the NumericUpDown control in a statement because I cannot convert it to Integer and I also dont know how to call in the data even if a number is selected.
View 3 RepliesI'm letting users select a date/time for a scheduled task to run, using two NumericUpDowncontrols. I'd like one-digit values to be padded with a leading 0, so as to display 09:00 instead of 9:0.
View 4 RepliesSo I'm currently working on a control that acts as a HTML editor. One of the thing that I need to do is insert tables, in order to do that I needed to provide the user with some options first. When thinking of the design for this, I decided to go with the form layout that Word 2003 uses;
Now as you may notice the third NumericUpDown control has "Auto" written in it. This is one of the values the other values include;
Quote:
0.7 cm
0.8 cm
0.9 cm
[Code]....
how I might be able to get my NumericUpDown control (or another control) to display those non-numeric options.
I have not been able to find a way to get the datetimepicker with ShowUpDown= True and custome format set to h:m tt to increment in 15 min intervals. I have been able to set it when the form is loaded to the nearest 15 min increment. But I need it to increment in 15 minutes units.
This can be down with the NumericUpDown control, but I need two of them one for the hour and one for the minutes and set it's Increment property to 15. Again I can set it to adjust to correct hour and the nearest 15 min. And of course I have to watch and when I go over 60 reset to zero and increment the hour control.
The users will be burly oil field workers using a Panasonic Tablet PC with a stylus in the field. It seems that it would be easier if I could increment the datetimepicker in 15 intervals.
I have 10 values to compare against each other for duplicates and would like a recommendation to do this most efficiently. The values are associated with the NumericUpDown control. I'm using VS and VB 2010.
View 3 RepliesI have my numeric up and down control set up but there is one problem. When i run the application, there is an IBeam in the value box. I have got my alphabet and arrow keys mapped to other things so when i press them windows makes the annoying beep noise. How can i get rid of the IBeam from this control permanently? I have tried the read only setting but the beam is still there.
View 1 RepliesAs part of a program that I am composing, the user needs to enter a value by way of a NumericUpDown control on one particular form. Once this and other criteria have been evaluated, the program will then move to the next "step" of the program. If they use the spinner built into the NumericUpDown control, the event is fired on every change and that's all well and good, but if they double-click the value in the control then type the value in manually, it doesn't fire until the control no longer has focus. I can't depend that this might be the case however. Using the "KeyPress" event, I can in fact know when the control has focus and the user has typed but what I cannot seem to get it to do is to get the control to "read" these keystrokes as values until the control loses focus.
View 3 RepliesFor a NumericUpDown control in VB 2005, how do I distinguish between a change to the numeric value made by the user (by changing the text or clicking the up or down arrows), and a change made internally by my code? The "Scroll" event works for user changes to the TrackBar control, but not for me on the UpDown control, and the ValueChanged event doesn't distinguish the source of the change.
View 8 RepliesWhat syntax do you use to add decimal data held in a NumericUpDown control, and add it to a one dimensional array? Is there a keyword to sum all the items in the array into one number(For averaging purposes)?
Dim heightarray As String()
ReDim Preserve heightarray(0 To UBound(heightarray) + 1)
heightarray(UBound(heightarray)) = heightNumericUpDown.Value
I have created a user control tha inherits from the NumericUpDown Control.Is it possible to set the cursor position within the control?I am validating the text OnKeyUp, and formatting it when it meets certain criteria.To do this i have to do me.text = Fomatted(Me.Text), which sets the cursor back to the position 0, i want to set it to the end of the text area.
View 1 RepliesThe form has 2 ComboBox and 1 NumericUpDown controls. I would like to change value of NumericUpDown based on selection in ComboBox. For example:
ComboBox1 has three value. for instance, AAA, BBB, CCC
ComboBox2 has three value. for instance, DDD, EEE, FFF
The NumericUpDown should has range 0-6 sum of both ComboBox. For instance, if user select from ComboBox1 AAA and from ComboBox2 EEE the NumericUpDown should display value 5.
How to show discontinuous value in NumericUpDown control by VB.Net? [code]...
View 2 RepliesI have a form which allows the user to create a question to find items.One of the questions is in the format of Something > a numeric value..So I used the NumericUpDown control. I set the NumericUpdown control to a valid range of values like 1 to 100.The user can clear the numericupdown control in which case the "Value" property returns the previous value prior to the user setting it to a Null String.
View 3 RepliesDoes anyone know of a way have the PropertyGrid control display a NumericUpDown instead of a DropDown box or text box? One of the properties that I need to capture is an integer and I'd like the user to be able to spin up or down to choose a value instead of typing it in.
View 1 RepliesI'm getting a 'NullReferenceException was unhandled' exception when a NumericUpDown control is cycled too quickly. To slow it down I've disabled the (NUD) control and set a 200 Interval Timer to re-enable it, but the exception is still happening.I don't want the slow the control down any further, I'd rather try to handle the exception, but can't find any help on how to do that.This is essentially the code which is incurring the exception, at the (4th) line... Dim p... : -
For b = 0 To 8
z = Pic(b)
[code]....
I figure I need to ensure each image is happily installed in it's 'Box before I try to load the next one, or it may be that I just need to check that the last one is 'in' before I call the next bit of code (which calls this bit again if I'm too fast) It all works perfectly well if I don't go too fast.
Is there a way to make NumericUpDown control hide decimal places but still can show if i entered manually?For example, i want to set NumericUpDown DecimalPlaces to 0 but when i enter something like 6.52, it remains 6.52 and not rounded to 7.
View 2 Repliesplease help me to correct the error "TextBox is a type and cannot be used as an expression" for the following statements..[code]
View 1 RepliesPrivate Sub TimerSaveonemessage_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TimerSaveonemessage.Tick
Dim Checkifsended As String = ""
If Checkifsended <> FixNummber(MessageToTextBox.Text) Then
[code]....
I am wondering how to have more than one SQL select statement inside my window formapplication that will control the data flow, as i am a newbie in visual basic.net 2005. This is because I am working on a Alarm Application Notifier which will alert the guard on duty as well as inform him the alarm location. The guard's computer screen will be showing the premises and the button will blink at that location where the alarm is. So if the alarm is at block A for example, the guard screen will show block A button blinking.I have already done the first part but i am STUCK at the rest as to how am i going to seperate the conditions for the 3rd to 4th building .The bottom is for the first building code. The data is from the sql database.
Imports System.Data.SqlClient
Imports System.data
Imports System.Drawing.Image
[code].....
I am wondering how to have more than one SQL select statement inside my window form application that will control the data flow, as i am a newbie in visual basic.net 2005. This is because I am working on a Alarm Application Notifier which will alert the guard on duty as well as inform him the alarm location. The guard's computer screen will be showing the premises and the button will blink at that location where the alarm is.So if the alarm is at block A for example, the guard screen will show block A button blinking.
I have already done the first part but i am STUCK at the rest as to how am i going to seperate the conditions for the 3rd to 4th building The bottom is for the first building code. The data is from the sql database.
[Code]...
Is there a way in which a case statement can be constructed to call, activate or triger a button control? If not, is there a way any statement can be created to activate a butt non control?
View 2 Replies trying to write a simple app that queries an access DB based on date .. the SQL looks like this and works fine with a date hard wired into the select:
SELECT Terminal_ID, SUM(Transaction_Quantity) AS Total
FROM tblTransaction
WHERE (TransactionType_ID = 3) AND (Transaction_DateTime > #1/1/2009#)
GROUP BY Terminal_ID
On the main form I have a monthcalendar control named 'FromDate' and a DataGridView control that shows the SQL results.
How do I get the user's selected date incorporated into the SQL statement that returns the results in the datagrid?
Something like:
WHERE (TransactionType_ID = 3) AND (Transaction_DateTime > Fromdate)
...but obviously there's much more to it.
I have made an app that will check to see if a website is on the 1st, 2nd, 3rd, 4th, and 5th page of google, the websites are in a datagridview. I am using five webbrowser controls but it begins to get slower and slower? As it searches for each website using a for statement. How to improve this code to make it run quicker, or even a better way to go about it.
View 8 RepliesI have a button on a web page that I just need a little help with some extra code. I think I need a TRY, CATCH statement?, this is what I have so far: I have a simple web page that has a button which at the moment when pressed enables the user to add data to a DB table via a stored procedure.Once this button is pressed a pop up message box is displayed to let the user know the data has been passed. The user then needs to press the 'OK' button within this message box which then directs them to the home page of the site. This works fine.
The code for this is here:
Protected Sub btnAddRawData_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnAddRawData.Click
'database conn, this is linked to the web config file .AppSettings
Using dbconnection As New SqlConnection(ConfigurationManager.AppSettings("dbconnection"))
[code]....
As I don't want the user to enter duplicate records in the database (This could be done by the user navigating back to the page where the btnAddRawData_Click is located and pressing it again.), I have created a UNIQUE INDEX named 'DupRecords' to stop the user from commiting this data more than once that day.When I run the web page now I get the following message in my browser:
Cannot insert duplicate key row in object 'dbo.GasRawData' with unique index 'DupRecords'.The statement has been terminated.The solution I think, is to add a TRY, CATCH statement into the btnAddRawData_Click code.
how do you make a statement that sets the focus to the txtPassword control?
View 1 RepliesIm doing the auto sign up in some websites but the thing is i want to use the NumericUpDown tool in Vb.net 2008, for example i choose 10 in NumericUpDown then i click the button then it will process or rather it will create 10 accounts... please give me an idea on how to use NumericUpDown... i try to play the code using if else but im stock.....
View 2 RepliesIm doing the auto sign up in some websites but the thing is i want to use the NumericUpDown tool in Vb.net 2008, for example i choose 10 in NumericUpDown then i click the button then it will process or rather it will create 10 accounts.
View 5 RepliesI am trying to bind an Access database to a MSChart control in VB Net 2008. I have a test database populated with four fields SAMPLE-DateTime, Values-Number, MAX-Number and MIN-Number. I'd like to only display the rows that fall within a specific date range but I'm running into a problem when i try to execute the following command:
[Code]...