So I'm currently working on a control that acts as a HTML editor. One of the thing that I need to do is insert tables, in order to do that I needed to provide the user with some options first. When thinking of the design for this, I decided to go with the form layout that Word 2003 uses;
Now as you may notice the third NumericUpDown control has "Auto" written in it. This is one of the values the other values include;
Quote:
0.7 cm
0.8 cm
0.9 cm
[Code]....
how I might be able to get my NumericUpDown control (or another control) to display those non-numeric options.
I have a form which allows the user to create a question to find items.One of the questions is in the format of Something > a numeric value..So I used the NumericUpDown control. I set the NumericUpdown control to a valid range of values like 1 to 100.The user can clear the numericupdown control in which case the "Value" property returns the previous value prior to the user setting it to a Null String.
I'm letting users select a date/time for a scheduled task to run, using two NumericUpDowncontrols. I'd like one-digit values to be padded with a leading 0, so as to display 09:00 instead of 9:0.
I have done some code so that when you choose a number from the numeriupdown it will look at the if statement and put the age into a category. the thing is the number in the updown doesn't go into the right category for me can you see what the problem is? [Code]
I have not been able to find a way to get the datetimepicker with ShowUpDown= True and custome format set to h:m tt to increment in 15 min intervals. I have been able to set it when the form is loaded to the nearest 15 min increment. But I need it to increment in 15 minutes units.
This can be down with the NumericUpDown control, but I need two of them one for the hour and one for the minutes and set it's Increment property to 15. Again I can set it to adjust to correct hour and the nearest 15 min. And of course I have to watch and when I go over 60 reset to zero and increment the hour control.
The users will be burly oil field workers using a Panasonic Tablet PC with a stylus in the field. It seems that it would be easier if I could increment the datetimepicker in 15 intervals.
I have done some code so that when you choose a number from the numeriupdown it will look at the if statement and put the age into a category. the thing is the number in the updown doesnt go into the right category?
'Assigning Textboxes and Combo Boxes To Memory lblUsername.Text = Username strCustomerName = txtCustomerName.Text intCustomerAge = Val(NumericUpDownAge.Value)
I have 10 values to compare against each other for duplicates and would like a recommendation to do this most efficiently. The values are associated with the NumericUpDown control. I'm using VS and VB 2010.
I have my numeric up and down control set up but there is one problem. When i run the application, there is an IBeam in the value box. I have got my alphabet and arrow keys mapped to other things so when i press them windows makes the annoying beep noise. How can i get rid of the IBeam from this control permanently? I have tried the read only setting but the beam is still there.
As part of a program that I am composing, the user needs to enter a value by way of a NumericUpDown control on one particular form. Once this and other criteria have been evaluated, the program will then move to the next "step" of the program. If they use the spinner built into the NumericUpDown control, the event is fired on every change and that's all well and good, but if they double-click the value in the control then type the value in manually, it doesn't fire until the control no longer has focus. I can't depend that this might be the case however. Using the "KeyPress" event, I can in fact know when the control has focus and the user has typed but what I cannot seem to get it to do is to get the control to "read" these keystrokes as values until the control loses focus.
For a NumericUpDown control in VB 2005, how do I distinguish between a change to the numeric value made by the user (by changing the text or clicking the up or down arrows), and a change made internally by my code? The "Scroll" event works for user changes to the TrackBar control, but not for me on the UpDown control, and the ValueChanged event doesn't distinguish the source of the change.
What syntax do you use to add decimal data held in a NumericUpDown control, and add it to a one dimensional array? Is there a keyword to sum all the items in the array into one number(For averaging purposes)?
Dim heightarray As String() ReDim Preserve heightarray(0 To UBound(heightarray) + 1) heightarray(UBound(heightarray)) = heightNumericUpDown.Value
I have created a user control tha inherits from the NumericUpDown Control.Is it possible to set the cursor position within the control?I am validating the text OnKeyUp, and formatting it when it meets certain criteria.To do this i have to do me.text = Fomatted(Me.Text), which sets the cursor back to the position 0, i want to set it to the end of the text area.
The form has 2 ComboBox and 1 NumericUpDown controls. I would like to change value of NumericUpDown based on selection in ComboBox. For example:
ComboBox1 has three value. for instance, AAA, BBB, CCC ComboBox2 has three value. for instance, DDD, EEE, FFF
The NumericUpDown should has range 0-6 sum of both ComboBox. For instance, if user select from ComboBox1 AAA and from ComboBox2 EEE the NumericUpDown should display value 5.
I have a NumericUpDown control with a range of 10-50 and I want to have the selected number be multiplied by an amount of money to create yearly cost. I dont know, however, how to use inputted data from the NumericUpDown control in a statement because I cannot convert it to Integer and I also dont know how to call in the data even if a number is selected.
Does anyone know of a way have the PropertyGrid control display a NumericUpDown instead of a DropDown box or text box? One of the properties that I need to capture is an integer and I'd like the user to be able to spin up or down to choose a value instead of typing it in.
I'm getting a 'NullReferenceException was unhandled' exception when a NumericUpDown control is cycled too quickly. To slow it down I've disabled the (NUD) control and set a 200 Interval Timer to re-enable it, but the exception is still happening.I don't want the slow the control down any further, I'd rather try to handle the exception, but can't find any help on how to do that.This is essentially the code which is incurring the exception, at the (4th) line... Dim p... : -
For b = 0 To 8 z = Pic(b)
[code]....
I figure I need to ensure each image is happily installed in it's 'Box before I try to load the next one, or it may be that I just need to check that the last one is 'in' before I call the next bit of code (which calls this bit again if I'm too fast) It all works perfectly well if I don't go too fast.
Is there a way to make NumericUpDown control hide decimal places but still can show if i entered manually?For example, i want to set NumericUpDown DecimalPlaces to 0 but when i enter something like 6.52, it remains 6.52 and not rounded to 7.
Im doing the auto sign up in some websites but the thing is i want to use the NumericUpDown tool in Vb.net 2008, for example i choose 10 in NumericUpDown then i click the button then it will process or rather it will create 10 accounts... please give me an idea on how to use NumericUpDown... i try to play the code using if else but im stock.....
Im doing the auto sign up in some websites but the thing is i want to use the NumericUpDown tool in Vb.net 2008, for example i choose 10 in NumericUpDown then i click the button then it will process or rather it will create 10 accounts.
every thread I've seen is trying to figure out something more complex. as a project for school I am making a grocery list form. I don't know how to work with the numericUpDown control. The form requests this information:
item: (textBox as string) qty: (this is the numericUpDown) size: (comboBox: can select from lb, gal, oz, each,.....etc)
I'am using the NumericUpDown_Validating event to cancel mouse clicks on the up and down arrows of the control.The idea is that the NumericUpDown control will stop incrementing when the base of a form reaches the bottom of the screen. That works, however the textvalue keeps incrementing. Why does the text keep incrementing and how do I stop it?
Private Sub NumericUpDown5_Validating(ByVal sender As Object, ByVal e As .ComponentModel.CancelEventArgs) Handles NumericUpDown5.Validating Dim y As Integer
I have a problem in the validation of NumericUpDown control in VB.net. I want it to accept only the numbers, but it is accepting punctuations like '.' and apostrophe also, here my code what I did below, but still the problem persists, I used keypress:
im creating a simple timer.it have NumericUpDown and Progress Bar. i use NumericUpDown to set the timer in minutes.I also put Progress Bar to indicates the percentage of times completed.For example if i set the timer to 1 minutes so if it at 0.5 minutes the Progress Bar will show 50% completed.But the problem here is the Progress Bar is not working.
I have 10 Numericupdown boxes in my Form from numericupdown1 to numericupdown10. I would like to instantly display the total amount of all ten numericupdown in a Textbox (textbox1) on the form. I don't want to have to push a button to get the total value of the numericupdown boxes.
I'm using a NumericUpDown control with a Minimum set to 10 (using for font size setting). When it is changed, it is bound to an Application setting and saved. On Form Load, I am attempting to set the value of the NumericUpDown control to the value stored in that setting (14 for example). No matter what though, it doesn't use the setting's value, it uses the value of the "Minimum" property of the NumericUpDown control.
i have put numericupdown in one column of datagidview. that column represent the time in format(HH:MM). i want to change MM and HH separately with the help of numericupdown. How can i change value of MM and HH with the help of Numericupdown in datagrid view.
I want to set the TextChanged event in NumericUpDown box,so that when you press a key, it instantly fires the textchanged event.The default ValueChanged event of the NumericUpDown box does not instantly fire the ValueChanged event. You need to first press the Enter key after you enter a number.And I read somewhere that NumericUpDown box also has a TextChanged event.How do I set the TextChanged event in the NumericUpDown box?
In my has 2 ComboBox fields and 1 NumericUpDown field. I would like change value umericUpDown in depend of value in Combobox.1. if ComboBox1 and ComboBox2 is empty NumericUpDown = 02. if ComboBox1 has some value and ComboBox2 is empty NumericUpDown = 13. if ComboBox1 is empty and ComboBox2 has some value NumericUpDown = 14. if ComboBox1 has some value and ComboBox2 has some value NumericUpDown = 2
I have tried to change the code to create a DataGridNumColumn. But, if I add the column style to the datagrid, the control does not close the edit cell.