What syntax do you use to add decimal data held in a NumericUpDown control, and add it to a one dimensional array? Is there a keyword to sum all the items in the array into one number(For averaging purposes)?
Dim heightarray As String()
ReDim Preserve heightarray(0 To UBound(heightarray) + 1)
heightarray(UBound(heightarray)) = heightNumericUpDown.Value
Does anyone know of a way have the PropertyGrid control display a NumericUpDown instead of a DropDown box or text box? One of the properties that I need to capture is an integer and I'd like the user to be able to spin up or down to choose a value instead of typing it in.
View 1 RepliesI have a NumericUpDown control with a range of 10-50 and I want to have the selected number be multiplied by an amount of money to create yearly cost. I dont know, however, how to use inputted data from the NumericUpDown control in a statement because I cannot convert it to Integer and I also dont know how to call in the data even if a number is selected.
View 3 RepliesI have 10 Numericupdown boxes in my Form from numericupdown1 to numericupdown10. I would like to instantly display the total amount of all ten numericupdown in a Textbox (textbox1) on the form. I don't want to have to push a button to get the total value of the numericupdown boxes.
View 4 RepliesI have a form with 84 NumericUpDown controls. How can I load each value into an array. E.G. Aryhours(1) = NumericUpDown1, AryHours(2) = NumericUpDown2..
View 3 RepliesI've tried following the Microsoft instructions to add multiple Textboxes to my form, but just cannot get it to work.Thus, I've deleted everything I wrote, so I don't have code to post. Is there a very simple way to add multiple TextBoxes to a form and be able to index them? If it's too lengthy, Is there a workaround?
View 6 RepliesMy application has no static number of pictureboxes. I want to add picturebox to array control.
[Code]...
I'm letting users select a date/time for a scheduled task to run, using two NumericUpDowncontrols. I'd like one-digit values to be padded with a leading 0, so as to display 09:00 instead of 9:0.
View 4 RepliesI have done some code so that when you choose a number from the numeriupdown it will look at the if statement and put the age into a category. the thing is the number in the updown doesn't go into the right category for me can you see what the problem is? [Code]
View 2 RepliesSo I'm currently working on a control that acts as a HTML editor. One of the thing that I need to do is insert tables, in order to do that I needed to provide the user with some options first. When thinking of the design for this, I decided to go with the form layout that Word 2003 uses;
Now as you may notice the third NumericUpDown control has "Auto" written in it. This is one of the values the other values include;
Quote:
0.7 cm
0.8 cm
0.9 cm
[Code]....
how I might be able to get my NumericUpDown control (or another control) to display those non-numeric options.
I have not been able to find a way to get the datetimepicker with ShowUpDown= True and custome format set to h:m tt to increment in 15 min intervals. I have been able to set it when the form is loaded to the nearest 15 min increment. But I need it to increment in 15 minutes units.
This can be down with the NumericUpDown control, but I need two of them one for the hour and one for the minutes and set it's Increment property to 15. Again I can set it to adjust to correct hour and the nearest 15 min. And of course I have to watch and when I go over 60 reset to zero and increment the hour control.
The users will be burly oil field workers using a Panasonic Tablet PC with a stylus in the field. It seems that it would be easier if I could increment the datetimepicker in 15 intervals.
I have done some code so that when you choose a number from the numeriupdown it will look at the if statement and put the age into a category. the thing is the number in the updown doesnt go into the right category?
'Assigning Textboxes and Combo Boxes To Memory
lblUsername.Text = Username
strCustomerName = txtCustomerName.Text
intCustomerAge = Val(NumericUpDownAge.Value)
[code]....
if you could possibly point me to the right direction, that would be great. i have tried researching about this but found no solution.i have a 2d array which holds student name and 3 grades (eng, maths, science.)student array (24,3)Now, i would like to use the data which is held within the array to create averages.I need a total class average for: maths column, eng column, and science. I also need an overall average for all subjects.the code i have used, so far, brings some odd results.
studentarray(i,1) / count
studentarray(i,2) / count
studentarray(i,3) / count
[code].....
I have 10 values to compare against each other for duplicates and would like a recommendation to do this most efficiently. The values are associated with the NumericUpDown control. I'm using VS and VB 2010.
View 3 RepliesI have my numeric up and down control set up but there is one problem. When i run the application, there is an IBeam in the value box. I have got my alphabet and arrow keys mapped to other things so when i press them windows makes the annoying beep noise. How can i get rid of the IBeam from this control permanently? I have tried the read only setting but the beam is still there.
View 1 RepliesAs part of a program that I am composing, the user needs to enter a value by way of a NumericUpDown control on one particular form. Once this and other criteria have been evaluated, the program will then move to the next "step" of the program. If they use the spinner built into the NumericUpDown control, the event is fired on every change and that's all well and good, but if they double-click the value in the control then type the value in manually, it doesn't fire until the control no longer has focus. I can't depend that this might be the case however. Using the "KeyPress" event, I can in fact know when the control has focus and the user has typed but what I cannot seem to get it to do is to get the control to "read" these keystrokes as values until the control loses focus.
View 3 RepliesFor a NumericUpDown control in VB 2005, how do I distinguish between a change to the numeric value made by the user (by changing the text or clicking the up or down arrows), and a change made internally by my code? The "Scroll" event works for user changes to the TrackBar control, but not for me on the UpDown control, and the ValueChanged event doesn't distinguish the source of the change.
View 8 RepliesI have an XML file that gets created on form load that just contains:
Code:
<?xml version="1.0" encoding="utf-8"?>
<User />
[code].....
I have created a user control tha inherits from the NumericUpDown Control.Is it possible to set the cursor position within the control?I am validating the text OnKeyUp, and formatting it when it meets certain criteria.To do this i have to do me.text = Fomatted(Me.Text), which sets the cursor back to the position 0, i want to set it to the end of the text area.
View 1 RepliesThe form has 2 ComboBox and 1 NumericUpDown controls. I would like to change value of NumericUpDown based on selection in ComboBox. For example:
ComboBox1 has three value. for instance, AAA, BBB, CCC
ComboBox2 has three value. for instance, DDD, EEE, FFF
The NumericUpDown should has range 0-6 sum of both ComboBox. For instance, if user select from ComboBox1 AAA and from ComboBox2 EEE the NumericUpDown should display value 5.
How to show discontinuous value in NumericUpDown control by VB.Net? [code]...
View 2 RepliesI have a form which allows the user to create a question to find items.One of the questions is in the format of Something > a numeric value..So I used the NumericUpDown control. I set the NumericUpdown control to a valid range of values like 1 to 100.The user can clear the numericupdown control in which case the "Value" property returns the previous value prior to the user setting it to a Null String.
View 3 RepliesI'm getting a 'NullReferenceException was unhandled' exception when a NumericUpDown control is cycled too quickly. To slow it down I've disabled the (NUD) control and set a 200 Interval Timer to re-enable it, but the exception is still happening.I don't want the slow the control down any further, I'd rather try to handle the exception, but can't find any help on how to do that.This is essentially the code which is incurring the exception, at the (4th) line... Dim p... : -
For b = 0 To 8
z = Pic(b)
[code]....
I figure I need to ensure each image is happily installed in it's 'Box before I try to load the next one, or it may be that I just need to check that the last one is 'in' before I call the next bit of code (which calls this bit again if I'm too fast) It all works perfectly well if I don't go too fast.
Is there a way to make NumericUpDown control hide decimal places but still can show if i entered manually?For example, i want to set NumericUpDown DecimalPlaces to 0 but when i enter something like 6.52, it remains 6.52 and not rounded to 7.
View 2 Replies1. I have a DataGridView box, that is connected to a MySQL database via the 'Data Source'. I am trying to do the datagridview1.rows.add("info here"), however i receive an error i cannot do this programmatically. I DO know the code to post to MySQL via the "insert into" la la la.However, I was curious if I can do this via the datagridview a bit..easier/simpler, such as a "datagridview1.rows.add(stuff)" sorta thing.
2. I am attempting to make a custom control, and as with ANY control, they have their.. settings. Example, a textbox, or label, has so you can set the Text. and color, etc.Others, have it (such as datagridview) have the little icon on the control itself, where you click it, and it opens a small window with settings.
Does anybody know how to persist (save and recall) a structure array when using a custom control? I don't want this data to show up in the properties window but it needs to be available "behind the scenes".
Right now, I'm writing the information to a file but this causes portability problems and may trigger the UAC.
[code]...
How can I persist this without writing to a file? Should I save it to the registry?
I need my app. to Create an Control Array at runtime that will consist of up to 50 Data Bound Labels. The app. will first be checking the 1st database field (Ing1) to see if there is data, if so then only create the 1st Data Bound Label (lblIng1) and then check the next field and so on.
The problem is that VB 2008 dos not seem to support Control Arrays. There must be another way to work around this.
I am working on an inventory managment project for a lumber mill. I am currently writing a piece of software to be used on the sorting section of the mill. The problem I am having is when a stick of lumber needs to be cut down in lengt. My current setup has a combo box that is populated with lengths of lumber that we might have (2' - 60'), a "Add" button and a data control (homemade solution with lots of labels, and panels).
The user will scan a tag into the system, and the system pulls up the info from the db. If the piece need to be cut, the user will select the length of the cut, and click the add button. The system will then populate the first line of the data control with the info from the cut (previous piece info, and new length). It also populates a pieceObject struct. This happens for any additional cut that might happen.
The problem I am having is that everytime I press the "Add" button, the length variable will update every length in the piece array.
Here is a section of the code I am dealing with.
piece is a lumberPiece, and pieceAry is a array of 15 lumberPieces
Each time the add button is pressed, the current data is stored into the array, and then the pieceNum is incremented.
[code]...
Recently I have learned visual basic 2008 express edition and developed programs for data crunching and analysis. The VB 2008 express edition has microsoft visual studio 2008 v. 9.0.30729.1 SP and .NET Framework version 3.5 SP1. Now I want to create x-Y (date-Y value) graphs using the crunched data stored in an array list simulating a data base access. I download and installed the "Microsoft Chart Control for .NET Framework " and try to learn to use it within the VB 2008 express edition using the tutorial. It seems that the chart control did not get installed?
1. Do I need at VB 2008 professional to allow using the chart control?
2. Why after installing chart control, there is no change on the items under the NET components within the Toolbox>ChooseItem>.
3. How do I get to use the chart control under VB 2008 express edition.
4. Any code available to generate versatile graphics without using the chart control? Because the chart control has tons of classes already it seems the best is to just use the existing and downloadable chart control?
i frequently have troubles with the dock property. it seems that either the order of creation or adding to the parent control determines whether or not a control's dock property supersedes another's. e.g. a control with the dockstyle fill will overlap with another docked control on the same parent. does anyone know what the rules are to determine how docking will behave; particularly in dynamically created GUIs?
View 2 Replies