just forgot, I knew this "Textbox1.text = format(textbox1.text, "####.00")" will set up the format to 4number with two decimal - 1234.00, how about if the user enter 12345.00, five number with two decimal, how did you do the check and give error message?
View 1 Replies
I just put all my aspx files on the local folder and made a website in IIS7. I added a virtual directory to it and then converted the virtual directory to application. The website loads properly but when i click the link that calls my application i get this error message.
Description: An error occurred during the parsing of a resource required to service this request. review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load type 'XXXX.xxxx'.
The error line in code is this -
Line 1: <%@ Master Language="VB" Inherits="_XXXX.xxxx" Codebehind="XXX.xx.vb" %>
What is the cleanest, most readable way to String.Format a decimal with the following criteria
start with a sign symbol (+ or -)
a fixed number of fraction digits
no decimal separator
right aligned
pre-padded with "0"'s
format number to hower many number on left of decimal and 1 decimal without rounding
View 2 RepliesI'm trying to validate an IP address in dot decimal format e.g. 127.55.21.1
System.Net.IPAddress.TryParse(IP, Nothing)
This though returns numbers like "500" or "9" as valid. Why does it do this? Do I have to set the IP address version, if so how would I do this?
I currently have a calculation that gets performed based on the type of operation a user chooses on my form (+, -, *, or /). I have it check their answer against the correct answer and tell them if they get the answer right or wrong. I need to know how I can check the answer when they choose a division sign that checks only the first two digits of the lbltxtAnswer label. I also currently have a validation that checks for numbers only, so if the user types in a decimal, the error message displays, which I don't want it to do. Here is my calculation and validation [code]...
View 2 Repliesit should take either decimal values or integers and max length is 16if it takes decimal value as input then it should contain only 14 digits in decimal place and 2 digits in fraction part eg(1234567.12-valid) but (12345678.123 - invalid) and also(123456.12345- invalid)
View 2 RepliesI am developing windows application in vb.net, i have textbox which should allow only numbers with decimal point. for example "99.00"
View 6 RepliesAs the title of the question, I need to validate regex using the following values:
(Maximum 2 decimal places, and 9 integers) with an optional percent symbol.
Valid:
10%
0%
1111111.12%
15.2%
10
2.3
Invalid:
.%
12.%
.02%
%
123456789123.123
I tried:
^[0-9]{0,9}([.][0-9]{0,2})d[\%]{0,1}?$
But It does not work as I want.
I want to convert numbers from 0 to 15 like that
[Code]...
Problem is that when we convert 2 to binary number it gives only 10 in binary, but i want to convert 2 to 4 bit binary number 0010.
I am calling the function below from an Excel spreadsheet and the conversion from hex to decimal using the VAL function in the "manufacturer" variable below is coming back with a negative value. The VBA edition is 6.5.
Public Function decMEID(ByVal sKey As String) As String
Dim manufacturer As String
Dim serial As String
[code].....
im having trouble understanding this question for a homework assignment. I need to write the PSEUDOCODE for the following scenario, but i got no idea about how to convert a hexadecimal number to a decimal number..You are required to input a two digit hexadecimal number eg. 3f (digits can be entered separately) and calculate the equivalent decimal number. (note the decimal number will be between 0 and 255) . output the decimal number
View 1 RepliesTo allow a textbox to contain "15" or 15.5" as numbers nothing else...I figured that ^\d+$ works for numbers but can't get decimals to work also?
View 1 RepliesI need to validate that my textbox is a number. I found this example online, but it says that Type RegExp is not defined. How do I fix it?? Here is what I have:
Private Sub txtAnswer_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtAnswer.TextChanged
Dim myReg As RegExp
[Code].....
i need the program to reject letters and words which are entered into the text boxes and only accept numbers. At the moment i am using IF statements but i need a more pratical approach to this.
View 4 RepliesI have this code that is supposed to validate that the value a user enters into the textbox is a number and not blank, but it is displaying the error message even if the user enters a number.
Private Sub txtAnswer_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtAnswer.TextChanged
If Not IsNumeric(txtAnswer.Text) And (txtAnswer.Text <> " ") Then
MsgBox("Please enter a number! Try Again!")
txtAnswer.Focus()
Exit Sub
End If
End Sub
I just realized I already have another section that checks if the textbox is left blank, but I still need to check that it is numeric.
how to validate 4 textboxes so that only numbers 1 to 4 can be entered but no number can be repeated.i already have code but it only validates some of the boxes and allows numbers to be repeated in other
Public Class frmGrid
Private Grid() As Short
Private Const intDimension As Short = 3
[Code]....
I have designed a form with textboxes for numerical entry. I need to validate each textbox so the number entered is an integer, and is between 0-1000. I am struggling to find how to validate the data entry.
View 4 RepliesCan someone tell me how to validate numeric, alphanumeric, currency, and 4-digit number in textboxes ?
View 2 Repliesi try to make a regular expression format to validate phone number at this format: (555) 555-5555 Dim IsPhoneValid As New System.Text.RegularExpressions.Regex("^/([0-9]{3}/)*[0-9]{3}*[0-9]{4}$")
View 3 RepliesHow can I only add the decimal part of a number to another one?
example: if a number is A = 10.25
Then X = 30
Y = X + 0.25 (Here it added 0.25 which the decimal only NOT 10.25)
Another example, If X = 16.35, A = 102.001
Y = 16.351
I am attempting to take the decimal places of a given input, round it so there are only two decimal places, then change it to a whole number. So far I have been able to remove the integer part of the number, leaving only the decimal, but the other procedures are eluding me. Here's what I have so far: (VB 2008)
Private Function DecimalNumber(ByVal number As Double) As Double
Dim Input As Double
Dim SubtractNumber As Decimal
[Code]....
That code returns the decimal part of the input just fine, and I thought maybe multiplying it by 10 would work....but obviously you run into problems when there is more than one decimal place.
I have class representing a unit of measure with a Decimal as the numeric. Just to simplify things for this example, let's say I'm representing centimeters. I'd like to implement a ToString() method for this class. The thing is, if the numeric value is a whole number I'd like to just display the decimal as an integer. Otherwise, I'd like to keep it as a decimal. So, for example, 10.5D centimeters would display as "10.5cm", but 7.0D centimeters should display as "7cm". I'd like this to be fast and simple to read. I have a working solution, but it seems like there should be a better way.Here's a contrived example showing my first crack at it:
Public Property Units As String = "cm"
Public Property NumericValue As Decimal = 10.5D
Public Overrides Function ToString()
[code].....
How to convert a whole number into decimal..For example 70 to .70 because there are some price in my system that needed to be calculated by grams for example $5 per grams... I am saving the price in my database as an integer..
View 2 Repliesi am using that code i have one datagridview and datagridview cell 3 value is 7
Dim n As Integer
For a = 0 To DataGridView1.Rows.Count - 1
If DataGridView1.Rows(a).Cells(0).Value = True Then
n = DataGridView1.Rows(a).Cells(3).Value
[code]....
the above code answer is 4 but i want the answer like that 3.5
How do I check how many decimal places does a number have in VB.net?
For example: Inside a cicle I have an if statement and on that statement I want to check if a number has 4 decimal places (8.9659)
How can I get the number of the decimal place, example 1.30 then it should give 2, for 5.0101 should give 4. I'm now doing that:
[Code]...
I have a problem regarding the number and want the number become from this: RM 2 to be like this: RM 2.00 [code]...
View 3 RepliesHow to convert the textbox.text to a number with decimal points. Once the subroutine have been process, the numbers will be dispalyed on the textbox or label in a format with two decimal numbers.
View 2 RepliesI have a field in datatable .If 1000 is the value in it, i want to display it as 1000.00.Then if user changes to 1000.50 it should display as it is.Is there anyway to do this?
View 4 Replies
