I have designed a form with textboxes for numerical entry. I need to validate each textbox so the number entered is an integer, and is between 0-1000. I am struggling to find how to validate the data entry.
View 4 Replieshow to validate 4 textboxes so that only numbers 1 to 4 can be entered but no number can be repeated.i already have code but it only validates some of the boxes and allows numbers to be repeated in other
Public Class frmGrid
Private Grid() As Short
Private Const intDimension As Short = 3
[Code]....
Is it possible to validate the value entered within a textbox by comparing it with a text file that is full off accepted values?
in my textbox will be a location like London, i want to be able to validate that it is correct by looking in my text file to see if it is there?
my textfile would be written like this:
|london|manchester|birmingham|leeds|bristol| ... etc so it need to split the values by looknig with the pipe characters ( | )?
I'm trying to figure out a way to validate the user data entered:
[Code]...
This is in MVC3, VB.net. I'm looking for an easy way to validate a users input data into the editorfor field.
I need to validate that my textbox is a number. I found this example online, but it says that Type RegExp is not defined. How do I fix it?? Here is what I have:
Private Sub txtAnswer_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtAnswer.TextChanged
Dim myReg As RegExp
[Code].....
I have this code that is supposed to validate that the value a user enters into the textbox is a number and not blank, but it is displaying the error message even if the user enters a number.
Private Sub txtAnswer_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtAnswer.TextChanged
If Not IsNumeric(txtAnswer.Text) And (txtAnswer.Text <> " ") Then
MsgBox("Please enter a number! Try Again!")
txtAnswer.Focus()
Exit Sub
End If
End Sub
I just realized I already have another section that checks if the textbox is left blank, but I still need to check that it is numeric.
I want to check if the value in the text box is EVEN NUMBER.else throw an error mssg.
View 3 Replieshow to create number of labels entered in a textbox.
I mean if textbox.text = 3, then three labels will be created programatically.
Of it is more or less, the exact no. of labels has to be created.
I am writing a Do Until Loop to check if the number entered in a textbox is between 1 and 12 in Visual Basic 2010.
View 4 RepliesHow to count no. of characters entered in multiline textbox, i wanna enter maximum 140 characters in my multiline textbox using vb.net ...
In short i want textbox to enter limit is only 140 characters .[code]...
I started editing an existing code (basicaly to learn vb) without any real previous experience. Well let's get to the point;I have a form that gathers data from db ordering by user ID (on click count).I have one DataGridView with a list of user,some have data in db, some have not. I came so far that if I CLICK on a user that have data, all data is dissplayed in 6 dinamyc textboxes.If user has no data inly first (emty) row with 6 dinamyc textboxes is created.
BUT THE POINT IS (my question to you) - I have a button that simultaneously adds a row of dinamyc textboxes bellow and multiplyies textbox04 (name is clickcount & 4) and textbox05 and displays the result in textbox06.I want to add a messagebox that shows if textbox04 & 05 are empty and in that case exits sub. Here is my code so far:
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Reset warnings[code].......
I'm doing a programming course at college, and I'm making a simple program that finds the mean of three numbers. Making the basic program was easy, but I can't work out how to validate the text boxes so that they only accept numbers. I've Googled, but I haven't been able to find anything. I have a look on the forums here but couldn't find anything either.
View 3 RepliesI have a appointments program and the user must be over 18. I was wondering is there a way to restrict the numbers entered into a textbox to be from 18 to 100. can this be done with e.keychar
View 2 RepliesI am new to Win Forms, I have a scenario here..When User enter ID in a textbox, I want to check that value in database and get the name for that ID before submitting the Submit Button.
View 1 Repliescan someone put his/codes in with..i have my own but it didn't add when i tried to put another integer on my textbox.
it will just update the first integer i put..
I have a question regarding using a TextBox in second form within the same project. Currently I am using two forms. From the main form you can click a button which opens the second form. There, I want to type in an integer value into a textbox and use it for the code in my first form. Here's my
[Code]...
is there a flag i can call to validate the text entered in to a databound combobox?
My situation is that i have a combobox where users can type in whatever they like, but OnLeave i'd like to ensure the value in the combobox is one of the items in the data that its bound to.
i'm avoiding a listbox because the suggest/append creates a nicer interface while they are typing as it shows possible matches.
I am trying to get my program to validate the hexadecimal range entered by the user, the range being between 00 - FF,
View 17 Replieswriting a function to validate that a user has entered their full name (so at least two names must exist in the textbox).
View 2 RepliesHi, I'm working on a program that reads text entered into a textbox and creates a list of items by separating entries by commas. Everything is working fine, except, because I am using an array to store the items in the list, I have a limited number of entries. This is only a problem because, as it is written currently, each comma counts as an individual entry. Therefore, users can enter ",,," for example, and it would use up 3 places in the array.
I'm looking for a way to check to make sure there is text after the comma before adding an entry. I've attempted to use the .substring command to check the character after, which works until it gets to the last character. Because there is no character after that, it will give an error.
Here is my code for extra clarity:
Public Class frmMain
Dim intCounter As Integer 'Stores the # of commas in the string
Dim Messages(49) As MessageProperties
[code]...
I am getting Errors: Operator '<' is not defined for types 'System.Windows.Forms.Button' and 'Integer'.
Operator '>' is not defined for types 'System.Windows.Forms.Button' and 'Integer'.
Value of type 'Integer' cannot be converted to 'System.Windows.Forms.Button'.
And my program does not work!
Below is my code..............
Private Sub ProgressBar1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ProgressBar1.Click
ProgressBar1.Value = TextBox1.Text
End Sub
[CODE]...
how to validate a value as an integer, heres my code:
dim myInt as integer
dim this as boolean
if myInt is integer then
[Code]....
I dont know what to put in the 1st if line, ive seen some val(myInt) stuff, and tryparse integer but not sure how to get it to work
i need to alter the code to determine if an integer entered by a user is prime preferably to determine if the number entered (between 1 and 50 is even or odd and prime from 51 to 100) i have the code for listing primes from 51-100 (or whatever range needed)but can i condense the code to a smaller foot print rather than have three different sections for each request
[Code]...
Have a very nooby question here, textbox2 contains a number and if the number entered in textbox1 is higher than textbox2 i wish to display a message box but the following doesn't seem to be working properly?
Sometimes it lets the user enter a higher number, maybe I am doing this wrong?
Private Sub TextBox1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.TextChanged
[Code]...
i am trying to put a maximum row number of lines in a multiline textbox. What i want is to achieve something like a console, with a maximum number of rows, with the top rows to dissappear and to keep always the last i.e. 500 rows. a note: for the textbox text i use the following algorithm
dim text
textbox.text = textbox.text & vbcrlf & text
the problem is that after a certain number of rows the program starts to get a little slow. So i guess if i put a limit to the rows i will fix this.
I am new to visual basic. Below is my
Private Sub todayMonth_Validating(ByVal sender As System.Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles todayMonth.Validating
Dim tb As TextBox = DirectCast(sender, TextBox)
If Convert.ToInt32(tb.Text) >= 1 And Convert.ToInt32(tb.Text) <= 12 Then
tb.Tag = True
[Code] .....
Actually, I wanted to validate the todayMonth textbox just to input number between 1 to 12. The problem comes out when I do this procedure : Lets say I input an interger 11 and it passes the validation and proceed to another textbox. Then I click back to the todayMonth textbox, it shows this error :
"Conversion from string "" to type 'Integer' is not valid."
I don't know why my value in the textbox is "null" or empty . I still saw the value 11 on the textbox.
How can I join more than one integer number to become one integer (Long) number?
e.g. 2, 3, 2 and 5 = 2325
123, 7 and 2 = 12372
10, 0, 5 and 1860 = 10051860
0, 10 and 450 = 10450
The code performs correctly when the input is an integer, but when I enter a character, the result is as though I've entered an integer. Can you tell me what's wrong with my TryParse statement?
Private Sub btnCompare_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCompare.Click
' Declare Local Variables
[CODE]...
Assuming that I have a Windows Forms textbox and want to reduce the maximum amount of characters that can be allowed in via user entry, how would I do that?
View 2 RepliesHow to create a new textbox every time previous textbox.text is entered?
View 7 Replies