i have a problem with viewing a dataset's table in my program code check out the error that exists when trying to fill a instantiated tableAdapter below: [code] The Undo operation encountered a context that is different from what was applied in the corresponding Set operation. The possible cause is that a context was Set on the thread and not reverted(undone).
View 4 Replies
I have a SQL Data Base. I have created a relation between these tables. Problem is when i drag and drop it on Data grid i get only Parent table columns but i want to sea them both like this.
- Parent Table Row
- Child Row 1
- Child Row 2
[code].....
I have been a systems admin for some time and my new employers are forcing my hand into programming. I am currently Trying to write custom software that interfaces with our Advantage Database. I have the data source and connection opening fine. It seems that All of the advantage developer classes are working correctly. Here is a link for adv advantage classes: [URL]..The problem I have is I want to query advantage... then place that query in a data set.., then display the results in datagridview on a form (just trying to see how the tools work) it seems that everything works without errors except I am getting nothing on my datagridview (stays blank after execution.
[Code]...
When I click the Add button to save new form information to the database the form doesn't show the new information unless I close and re-load the form.
Public Class WeightHeightPopup
Dim WHcon As New OleDb.OleDbConnection
Dim dbWHProvider As String
[Code].....
I have a search page in my application where I am searching the database for the records that meet the specified conditions that the user selects. All of this works by creating the dataset, datatable, and dataadapter in the code. I then take a created bindingsource link it to the created datatable and then attach the bindingsource to my datagridview to display the results. Now what I am trying to do is to figure the Mean, Median, Mode and Standard Deviation of the results that were found above. My question is how to I run a select query on the code created table. I have the select query I want to use and when I try to use it in the code it talks about the connection. Now I have a dataset that is part of the project and I have the on just for the search page. Let me know if you need any code samples.
View 10 RepliesI use a dbDataAdapter to populate a DataTable from an unlinked oracle database.I have a dbDataAdapter that I want to insert rows into an SQL Server table using SQLCommandBuilder.I have been trying all day to update the DataTable that references the SQL Server table with the data from the Oracle DataTable so that I can insert the rows.
View 2 RepliesCan you please explain me and/or show some good tutorials how to do it?It seems pretty complicated because visual studio usually does it all for you and that made me stupid and not to do anything about it.Things I don't know to do in code but I know VS does it for me:
[Code]...
I'm sure there is a good tutorial somewhere on the internet. I'm okay with doing it with designer, but now when I have a situation where I can't use MDI container but tabcontrol.Other solution would be to make a MDI container out of tabcontrol. Is it posible or only other form can be MDI container.
Is there any keyboard combination out there that I could just press to show the Design of the form while viewing its code? I just find it a pain to right click then pressing the icon.
View 2 Replies(my first question) For starters.I am using Visual C++ 2010 I have VERY limited knowledge (I am not sure how to declare a variable or convert to strings.I took a Visual Basic course in school so I do understand SOME basics... just not the right language
I am trying to make a program that can open pictures in its own PictureBox. I have the form already made, and I had it working with a combobox with the list of all the different pictures, a button to load the picture depending on the selected item in the
combobox (MANY MANY if statements), and i also added a previous and next image pair of buttons (200% more if statements). I was happy with it, except whenever I added a new picture I had to add many lines of code... So i figured i can use this openfiledialog
and open them that way.
what i have so far is when i press "btnLoad" it opens the "ofdPictures" {openfiledialog}
what i need it to do is when i select my picture and press "open", it open the image in the picture box "picPictures", which is in my form.from what i understand with playing around with openfiledialog in VB is that the command this->ofdPictures->FileName
makes the selected file a string... but i think i have to make it = a string variable...
now, i think i fixed that by adding to "private: System::Void ofdPictures_FileOk"
[Code]...
I am developing a vb.net application in SQL server 2005 ,now i would like to import MS access database tables from a network into sql server 2005 database, using stored procedure or vb.net code without using SQL server 2005 Wizard .
View 1 RepliesI have a large form that is set up from master-detail datasets in Visual Studio 2008.I havene master table with a large amount of detail tables. Several of the detail tables also have detail tables linked.Now I need to add a master table that sits on top of my existing master table making it a detail table.
View 7 RepliesI have a project which contains a large number of lookup tables, and I have all of these lookup tables represented in a single typed DataSet, which contains TableAdapters for each lookup. I've designed an editor for these lookup tables, which should allow editing of one of these at a time. My front-end is written in VB and WinForms, the back-end is a SOAP web service; I can successfully pass the changes to the DataSet back to the web service, but can't find a way to use a TableAdapter to update the single table that has been changed.
What I'm trying to do is instantiate the appropriate TableAdapter for the updated DataTable by sending the name of the table back to the web service along with the DataSet, then referring to the TableAdapter with a dynamic name. The normal way to instantiate a TableAdapter is this:
Dim ta As New dsLookupsTableAdapters.tlkpMyTableTableAdapter
What I'd like to do is this, but of course it doesn't work:
strTableName = "tlkpMyTable"
Dim ta As New dsLookupsTableAdapters(strTableName & "TableAdapter")
Is there any way to achieve this, or am I taking the wrong approach altogether? My other alternative is to write separate code for each table, which I'd prefer to avoid!
I have code running in the Datatable.ColumnChanging event in my dataset. This dataset underlies a form and conventional drag/drop controls are in place for data entry.when the event triggers and runs, I am running code in the form that checks the dataset.HasChanges property. It is showing False. But this is immediately after the ColumnChanging event has been triggered.Okay, I see by others posts and MSDN that .HasChanges will only be true after moving off the row with the changed column. I have also noted lots of discussion about the advanced binding property of DataSourceUpdate Mode, but that does not address this issue.I guess I can do this by checking the state of the row for the binding source. Just seems odd that the event behind the dataset can be triggered and that does not change the dataset.HasChanges property.
View 3 RepliesHow can I update local dataset with mysql database without making duplicates. Assuming I set some column in mysql as primary key, which has unique string.
adapter.fill will just add duplicates, but adapter.clear before that is not an option.
So I want to update if the key column is the same with mysql data and if there is option for ignore adding new row.
I have some concern about designing Datasets. I was told that it would be good to have a dataset for each table for maintenance purpose. Because frequent change in database tables is expected, having one dataset including every tables would be pain to make the corresponding change in the application.
Q. is it good approach to have a dataset for each table ( I would end up having 30~40 datasets for each db table using Stored procedure) ?
I have a separate project for commonly used datasets. each project include "dataset project" as a reference, and use it by including needed dataset into Forms, classes, etc.
Q. Does this approach makes the whole system to be slower? If I have a set of datasets as a separate project, it would be beneficial, since It will be easier to make a change (I only need to make modification in one place)
I have a dataset (WW1Dataset) with one data table(WW1).(database used in an access database) I'm trying to filter the dataset e.g a user wants to filter by a chosen surname (SurnameTextBox.text) so the datset is filtered to display only those records wherethe surname column in the dataset matches SurnameTextBox.text.
View 1 RepliesI have this code to edit the datarow of my table adapter but t doesnt update the table. I think i have a missing code that's why but i cant figured it out. by the way im using vb2008 and SQL as my database. [code]
View 3 RepliesI added a table to my Access database. I added that table to my dataset. Using Database Designer VB Studio, my table and tableadapter show up in the design view. The class definition is in the datasetdesigner.vb, and it shows in the object browser. But, I can't reference it in code. I am a newby and obviously missing somethning.
View 1 RepliesI am trying to use a data set to replace some objects i have currently got but wich are getting rather complicated. I have created my self a Data Set, currently simplified but am just learning ATM, I have normalised it as per basic understanding of databases.
3 tables
A Parts Table with 2 columns, Serial Number as the primary key and Data Inspected
A Feature Table with 2 coloumns, Feature Name as the primary key and Nominal
Data Table with Part Serial Number, Feature Name, Actual and a KeyColumn which is self incrementing read only.
Ultimately the Parts Table and Feature Table will have a lot more meta data that I will want to sort/filter. I would like a Data Grid Veiw or equivalent in WPF to show a table of all the data for all the parts, so features along one axis and parts along the other. Ultimately I would like to be able to sort/filter on both axis using different bits of meta data. I am aware of LINQ and DataVeiws, have had a play though not good at either, so far have only managed to get one column of data, so either all the data for one part or all the data for one feature.
I'm also aware of the Entity Framework though have no idea how to use it. So my question is, do I need to extract the table one column at a time? seems a bit inelegant, or is there a query or View I can set up to do this? or am I using completely the wrong tool? I know this might work in a fully fledged database but cant install/assess one on the machines to be used I need to keep it contained to the .net executable. If I need to do it as a loop am I right in assuming LINQ would be a better choice to put in a for loop?
I am developing a s/w. I am trying to update data in table. While I save the data, it will update into table. I have a gridview which binds table data through dataset. While I update the changes it is not reflecting in the grid view.
What I will do inorder to update the changes into gridview.
[code]...
Dataset table not updating The reason why everything ends in 1, is because I have another instance running with similar names... so disregard that.
I am using VB.NET 2008 and I want to delete an unused table from the dataset. When I do this I get error messages which seem to originate in the Table Adater Manager on the various forms. The only way I can figure out to correct this is to delete the table from the code after deleting it from the dataset designer. But it says that you shouldn't do this.
View 5 RepliesI just want to ask. Using getChanges method in vb.net only get the changes on the dataset not on the table in database?for example I fill a dataset from a table in database.So there is a table in my dataset. There has been a changed in my table in database for example an added row.So there is no way in my dataset to determine this change because it has filled the original data.How can I determine the changes in my database table?
View 1 RepliesI am facing a problem. My dataset couldn't store two different tables. I have two separates class and forms. The first one is a class that do the necessary filling for a database
Imports System.Data.OleDb 'Import the OleDb libary
Public Class DBSetup
'Create two new strings to store Query and Connection String
Public strConnection, strAdapter As String
[Code]...
I Need to Edit Invoice After Load this .I have Two Table : Invoice_Summary And Invoice_Details
After I Load Saved Invoice I want to edit but i have no Idea how can i do
I want to return the top 5 records of a table in a dataset for datagrid view. The following does not work.
DataGridView.DataSource = DS.Tables("TABLENAME").Select("SELECT TOP 5")
I have some code in my ApplicationEvent.vb to handle The problem is that I need to execute a procedure that has a dataset table adapter in it.Obviously as I want it to run in batch mode I can't have a table adapter as they are GUI based (or at least I think they are) so I am getting this error:
'V_SyncStatusTableAdapter' is not a member of 'AppName.My.MyApplication'
For this code:
If Me.V_SyncStatusTableAdapter.GetData.Rows.Count > 0 Then
[code].....
I want to add saveral table in my (My Seting dataset with table name) How can I do it. I already try the following code but its not working[code]...
View 9 RepliesHow do I do this for a different dataset? I'm trying to rule out database problems so I made another one and added it, but now I need a table adapter for this one instead of the old database because it keeps giving me an error. I don't see any place to add them and I'm getting extremely angry at these databases.
View 1 Replieshow to bind a listview to my .mdf dataset. how would i also manipulate the binding navigator that comes with datagrid view or details view when you put the fields on the form with buttons i want to add apart from the ones on the navigator itself?
View 6 Replies
