.net - Filtering SQL By Correct Time Spans?
Feb 23, 2010
I have a table that has two time columns. One is a login time one is a logout time. I would like to be able to filter between the two, basically greater than the minimum selected and less than the maximum selected. I am using a monthly calendar to get me the spans of time but it is not working correctly. From there I would like to add the 4 columns in the table to a gridview. The date in the DB is the in following format:
2/23/2010 11:17:01 AM
I know how to get single elements from the table, or a column but not entire rows.
So i guess I have 2 problems, getting the filter for the SQL correct then binding the results to a table.
Here is my code so far:
Dim cn As OleDbConnection
Dim cmd As OleDbCommand
Dim str As String
[Code]....
SLaks has answered most of my question, one problem remains. I need to figure out how to make it so the monthcalendar can select just one day and return that days values. Seems like the time is an issue since it is in the DB as stated above. Just comparing the dates is not enough.
View 1 Replies
ADVERTISEMENT
Aug 9, 2011
I have a VB.NET application that executes a test when the user clicks a "Start" button. The application communicates back and forth with a USB device and eventually stops when the USB device sends back a specific trigger, or if the user chooses to cancel the test. I would like to measure the time elapsed during each test and display it to the screen.The program is significantly complex and I have several timers that control sampling rate, the frequency of the output, the frequency of signals in a calibration method, etc.I tried two approaches so far, both of which led to invalid time measurements. I say they're invalid because I used several stopwatches I know to be accurate in addition to the system clock (the clock with a second hand that pops up when you double click the time in the bottom right hand corner of Windows XP) to measure the actual time of each test. Consistently, my program will indicate more time has passed than actually has.I tried simply dividing the number of samples I took by the the sampling frequency. I got back a time that was about 1.33 times greater than the actual time. This ratio would change with different frequencies, and even with the same frequency from day to day.
I tried using the DateTimePicker in my main form to measure the time passage. At the start of the test I'd record the start time, startTime = DateAndTimePicker1.value, at the end of the test I'd record the end time, endTime = DateAndTimePicker1.value, and then I'd set the text of a label equal to their difference, TestDurationLabel.text = (endTime - startTime).ToString. I initialized startTime and endTime as Dates. I get back a time that is about 1.2 times greater than the actual time.
View 4 Replies
Jul 29, 2010
for example
Dim CurrentSplitter As String = My.Settings.CurrentSplitter
lblCurrentSplitter.Text = "Current splitter: " & CurrentSplitter
vs
[Code]....
View 7 Replies
Apr 16, 2009
I send a vcal through mail in web application with convert datetime to universal datetime.If i run web application locally (local sevser in India) i get correct time in my vcal.But run appication live (server in US) then not get corret time with a difference of 1 and half hour
code :
Dim result As StringBuilder = New StringBuilder()
result.AppendFormat("BEGIN:VCALENDAR{0}", System.Environment.NewLine)
[code].....
View 1 Replies
May 14, 2012
is it possible to get the correct time online? Because we are currently making a system that requires date and time. We are preventing a common error where the system time is outdated so we are going for online time and checking it in out system.
View 2 Replies
Aug 3, 2009
I have looked at websites all day trying to understand this can someone point me in the right direction
Have one column heading Called "Monday" under this I want to to have 3 sub headings.
i.e
Monday 3rd August
O/H Stock | Production | Orders
View 1 Replies
Apr 27, 2010
I have a button that will run a video file in the Windows media player box, first up, is there a way for that video to display full screen on a secondary monitor?My plan was to have a large form that spread across the two screens with the control buttons on one side and the video on the other, is there an easier way to do this? Otherwise I think I might have to look at making an individual form for each screen and then somehow getting the buttons on say form1 to do the work on form2. Again is this hard to do?
View 2 Replies
Jan 15, 2011
I am trying to find a way to show a large amount of data that spans across multiple forms and text boxes. I am making a somewhat summery of the input strings.
View 3 Replies
Nov 9, 2009
[Code]....
Now as you can see it is sending the textbox1 text and then pressing enter then sending textbox2 text! Theres quite a few problems in that but before i discuss note: This code is in a Timer. Problem #1: It does not send the keys fully correct all the time because its trying to send them all at once! So i want it to send them 1 letter after the other with 200 ms sleep in them! Problem #2: The sleep is not working: The reason i know is because even after it did the first textbox1 text it didnt wait that 2000 ms!
View 31 Replies
Jul 20, 2009
What is the correct way to compare time in this format "09:30:54" ?
View 14 Replies
May 15, 2010
Is it correct to correct properties values on the fly? for example: (note the .ToLower)
Public Property X() As String
Get
Return _x.ToLower
End Get
[code]....
View 1 Replies
Jun 8, 2010
i'm working on a system that upgrades a basic version to a proversion but i have a payment gateway . it generates a code in an SQL DB.now i have a form in VB that has a textbox and a button how can i let VB connect to my SQL DB receive the code and then check if that code is correct and if its correct download silence the pro file. from an url.
View 7 Replies
Apr 18, 2009
I have created a basic query generator which allows a user to select the Select, WHERE and criteria attributes using a number of checkboxes.However i have got stuck. In the results form i have the following code
Private Sub DisplayRecord()
RichTextBox1.Text = ds.Tables("newResults").Rows(intCurrentRecord).Item(0)
RichTextBox2.Text = ds.Tables("newResults").Rows(intCurrentRecord).Item(1)
RichTextBox3.Text = ds.Tables("newResults").Rows(intCurrentRecord).Item(2)
[code]....
The program keeps on crashing if the user does not select the corresponding amount of display records from above for the amount of attributes they want for the SELECT part of the query in the intreface in form 1.
How would i go about making something where the number of SELECT attributes selected which are listed in a string create the correct number of textbox fields in the results form (form2)
View 1 Replies
Sep 6, 2009
I have an ASP.NET application with a SQL Server back end. I am storing all my dates in UTC format and doing the appropriate conversions to the local time zone of the browser viewing it. One of the pages asks for a start date and end date (no times).
I am taking the start date and setting the time to 00:00:00 hours (midnight) and I'm taking the End time and adding a time of 23:59:59, so that the date range covers the whole day. Now what I'm trying to do is do a SQL query to do a search for records in this date range. The problem is, the data in SQL is in UTC time and the user is typing their dates and times in their local date and times. My quickest solution was to convert the date and time to UTC, then search the records. However, by doing this, I am to believe ASP.NET converts the given time and date to UTC based on the server time zone. How can I convert a date and time to UTC time based on the time zone of the user?
View 5 Replies
Dec 2, 2009
I created a query on a Access database, which I would like to show with the datagridview. So, I created a new table adapter with my query, which creates as well the datatable tbl1. Then, the wizard created the datagridview for me, showing the correct data. Now, I would like to filter these rows: I already read it is possible to do it by simply clicking "Add query...", but I would like to do it in a different way. I have some comboboxes, and I would like to use the strings inside them to filter my table tbl1. Is it possible to apply those queries one after the other on my datatable tbl1? I am able to filter only once with:
Me.tbl1TableAdapter.FillBySomething(Me.DataSet.tbl1, params...)
But, if I wanted to filter the result again?
View 4 Replies
Aug 29, 2011
I am having trouble filling my datagridview from a separate combobox selection.On my form, I have a datagridview that displays all the contents from my tab delimited text file (customers.txt). Also, on the same form I have a combo box that displays all the customers names.
Once a user selects a name, the datagridview should populate details about the selected customer. I figured out how to fill a multiline textbox; however,I want to fill a datagridview instead but am unsure how to go about doing so.Code for filling mutiline textbox with customers details
Private Sub ComboBox1_SelectedIndexChanged(sender As System.Object, e As System.EventArgs) Handles ComboBox1.SelectedIndexChanged
Dim dr As DataRow = table.Rows(combobox1.SelectedIndex)[code]......
View 6 Replies
Oct 5, 2009
I have a structure representing a log, containing fields such as Order Number, Line Number, etc. Each time a test is done, this log structure is serialized and appended to an Xml file created on the day which the test was done. At present, i have 20 or so Xml files containing varying number of log structures which i would like to be able to filter through in a single search. My target at present is to be able to load all data against a specific order number, and also to perform a search and return distinct records, as there could be multiple Order Numbers in one or many files.So far, i've attempted to load all the data from all files into a large generic List(Of Log) and use LINQ to filter out the results. I've also tried loading all the data into a DataTable and filtering using the Select method. The last method i used was using the SelectNodes method from the XmlDocument class. All of these methods seemed to work but i was becoming stuck when filtering distinct records?
View 1 Replies
Nov 18, 2009
working on a little app which requires the user to select items from a listbox bound to a dataview, then adding selected items to a new table. In the new table calculations are done, and so far its all working pretty good. The problems comes in is that there are many values and types to filter and I am having some trouble with the search aspects. So far in my code I am going about the problem using the datatables in this manner:
to sum it up:
form loads initial data to table
displays it in a dataview bound to a listbox
dataview is filtered using rowfilter queries, controlled in various manner
dataview is converted to table, then selected row is imported to final table
Calculations done on final table values
So far its pretty damn fast and works well, however the searching needs refinement. To give you an idea here is *some* of the search criteria in one of my rowfilter calls.
color:
red
black
[code]....
Form is requested to be as so:
6 checkboxes, and 12 numericupdowns (spin) buttons I have a seperate method to enable/disable them dynamically.
Have a look at the select row query: its getting messy already.Although I am specifying max and min values it seems to only filter by the max value and color, so something is wrong here...but i think it is just syntax... but already its getting a little long, just wait until i add the types as well..
Public Sub mainFilter()
' variables to enable filtering by color
Dim red = ""
Dim black = ""
[code]....
So basically is there a better way for me to go about filtering these table values? I notice in visual studio I can add queries to the dataset in there and they work quite well directly on the source table, without using a dataview and temptable, but when I open the query builder I can't add variables to the queries, which would force me to make queries for every foreseable scenario, and add buttons or menus to activate them all....not good.is there a way to hand code these queries with variables?
alternatively I thought about making a little rowfilter query builder, that substitutes variables for the rowfilter syntax, using some simple control flow, perhaps select case and then add them to the rowfilter query as the user enables/disables them in the form.i.e.
if RedCheckbox1 then
Redvar = "Color = 'Red'"
Maxvar = " & spinMax.value & "'
[code]....
View 1 Replies
Mar 8, 2010
Why does the following query raise the error below for a row with a NULL value for barrel when I explicitly filter out those rows in the Where clause?
Dim query = From row As dbDataSet.conformalRow In dbDataSet.Tables("conformal") _
Where Not IsDBNull(row.Cal) AndAlso tiCal_drop.Text = row.Cal _
AndAlso Not IsDBNull(row.Tran) AndAlso tiTrans_drop.Text = row.Tran _
[code]....
Run-time exception thrown : System.Data.StrongTypingException - The value for column 'barrel' in table 'conformal' is DBNull.
How should my query / condition be rewritten to work as I intended?
View 2 Replies
Sep 23, 2009
I would like to count records of a datagridview after having applied a search criteria
the code i am using is the following:
Private Sub count_btn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles count_btn.Click
[code].....
View 2 Replies
Nov 25, 2008
I am saving some operational log information into a XML file. At any time the user can bring up a datatable to display the information. I don't want them to see the 'HOURLY' log. I can't seem to filter this out. Also I need to populate a list box with all the unique events for filtering.
Example XML:
Code:
<?xml version="1.0" standalone="yes"?>
<DocumentElement>
<LOG_x0020_Table>
[code]....
View 1 Replies
Mar 11, 2009
Could anyone tell me how to filter a Microsoft Access data files when using OpenFileDialog?
View 1 Replies
Jun 6, 2011
I work with an access mdb When I run the program with the following code it gives an error "Nullreference exception unhandled" "the object... is not for an example of an object..." (very free translated but you will surely recognize this)
This is my code:
Private Sub TextBox5_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox5.TextChanged
Dim dvFilter As DataView = Nothing
[Code].....
View 2 Replies
Oct 31, 2010
Oke I'm writing a small program where the user can fill in some textboxes and a Montcalendar and then put it in a listview by clicking the add button.
The listview has the following columns:
--Month ( which is retrieved from the monthcalendar view as followed: Monthcalendar.SelectionStart.Month)
--Day ( which is retrieved from the monthcalendar view as followed:
[Code].....
View 12 Replies
Aug 17, 2010
I'm currently trying to create a system which stores different cases for clients using Visual Studio 2010.When adding fields from the database a table adapter is automatically created.Me.TblMattersTableAdapter.Fill(Me.MJPAccessDataSet.tblMatters)Now my problem is that each case may be at a different stage. They are either 'Active', 'Closed' or 'Archived'.So my question, is there a way to filter these results? I've tried creating DataTable and only adding the archived cases but I couldn't get it to work. I was trying.
View 4 Replies
Feb 21, 2011
I am using VB Net (2008) and SQL (2008) in Windows Forms, I am trying to filter a DataGridView , this DataGridView is being fill by Add New Data Source to my win form thus Dataset, Binding Source, Table Adapter are added to my form. Also my win form has 4 combo Boxes, a button and a DataGridView . Cbobox1 hold all the columns Name of the DGV , let say for instance that Supplier is the name of the column selected by cboBox1, CboBox2 which hold all the operators (being fill manually) like ( =, <> =< , >=, < , > , like, not like, between, not between, is null, is not null ), CboBox3 hold all the names of the Suppliers in alphabetic order, CboBox4 hold the same as CobBox3, Note: Cbobox3 and Cbobox4 values change as CboBox1 select a different column name. When using BindingSource.Filter every thing work fine, for this ex: let say cboBox2 is worth <> See part of my code EX:BindingSource.Filter = String.Format ("{0} {1} {2}", cboBox1.text, cboBox2.text, boBox3.text) except when using the operator "Between" I get this message āBindingSource.Filter do not support this type of operator". So this is why I am trying to use the Sql Select Command. Wandering if it is possible to use the already Sql Connection and Table Adapter to build a SQLString Filter and also could I use the curly braces.
View 5 Replies
Jan 20, 2009
I want to be able to use this program to filter through a list of doctors, and based on what doctor you select, only show the patients who see that doctor.
Here is what I have so far, the database has a column with just the doctor names so I thought I should be able to filter it by that and show the patients, but none show up. I don't get an error and it seems to refresh, but nothing ends up in the schedule.
[Code]....
Actually I just realized I don't think I loaded the data from the database as the form loaded. I tried doing that, but get an error where I called for the data to be loaded. I added the code where I try loading the databases.
"No value given for one or more required parameters."
View 10 Replies
Sep 25, 2009
I am using a datagrid to display a dataset. I would like to filter rows on certain fields (ex: ____ (Male/Female). I would want to it post-data retrieval on the client side.
View 3 Replies
Jan 14, 2009
I have a database with a Student table and a Class table. There are many students and many classes and each student is a member of a class.I then have a windows form that needs to display a list of student names in a listbox. However, I have a different form for each class. So for example in this form I have coded below, I need to display all students that are members of class51. The code I have so far is reading in all students from tblStudent and this is not what I want. I know that if I was doing SQL or something I'd simply write SELECT * FROM TBLSTUDENT WHERE CLASSID =his?
Private Sub frmAttendace51_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'clear data set of any existing data
[code].....
View 7 Replies
Jun 15, 2012
I have a combobox where I use datasource to populate it with data, in the key press event I have the following coding which i use to filter the data.
With Me.Combobox1
Dim ToFind As String = .Text.Substring(0, .SelectionStart) & e.KeyChar
Dim Index As Integer = .FindStringExact(ToFind)
[Code]....
I know this would be possible by me changing the style to dropdownlist but its not exactly what I was after.
View 2 Replies
