.net - VS2008 "must Implement" Fake Errors?
Oct 6, 2010
I have a VS 2008 VB.NET Solution, which is quite large. Every once in a while, if I take latest code from source control, I get hundreds of errors. These aren't real errors. They are all about classes not implementing functions/events from interfaces (which they DO implement).
"Class [class name] must implement [event or function name] for interface [interface name]"
I usually end up spending couple of hours doing a combination of: building/rebuilding the solution project by project, cleaning the solution, deleting everything locally, taking latest... etc. At some point, everything just magically builds.
View 2 Replies
ADVERTISEMENT
Jul 26, 2010
Anyone ever get fake compile errors and rebuild the program and then they go away? Well mine aren't going away and I can compile and run no problem. I've got something like 100 compile errors and the "run with error's" warning doesn't appear at any time and when I do run my program it runs just the way it should. However I still see like 100 errors.
View 4 Replies
Jul 4, 2010
I am trying to use the SolutionEvents interface in Visual Studio and the sample it have is in C#. When I try to port it I get compile or run-time errors ("COM target does not implement IDispatch"). The problem is with the bold line on the bottom with the "+=" which does not work in VB. Removing the + causes a run-time error.
The C# code is:
View 4 Replies
Dec 14, 2011
Suppose I want to inherit from System.Data.SqlClient.SqlTransaction which is sealed. Supose I want to just put a wrapper around SqlTransaction and always use MyTransaction instead of SqlTransaction. Is there a way I could potentially cast MyTransaction to SqlTransaction using an Implicit/Widening operator?
View 8 Replies
Jun 30, 2009
Does anyone know of a way to script falsifying the amount of RAM installed on a PC for an install. I have a program that needs to be installed on many systems that all have little RAM. The program requires during the setup that at least 384 MB of RAM be installed. Some of these systems only have 256 so the install fails. I know the easy answer is install more RAM. Ain't going to happen. Company has no budget. The install should be fine I think, but would like to test more. in order to do the testing to see if this would even work though I need to figure out how to have the OS tell the app it has more RAM than it does. I don't know this app but my first guess is the app queries WMI for amount of RAM?? If that's the case is there a way to set that WMI entry to something different until after the app is done? Or if someone knows another way that would be good too?
View 17 Replies
Aug 6, 2009
I have two tables, Clients and Administrators, which are linked in a many-to-many relationship by the table ClientAdministrators. In the real application this works fine and I can get a list of Administrators for my Client. My problem comes in trying to unit test the service class that is retrieving this from the repository. I have a FakeRepository class which implements my repository interface and I have several internal lists of objects for the service class to query against.
[Code]...
View 3 Replies
Oct 29, 2010
I have this code to send an email:
Imports System.Net.Mail
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs)
[code].....
View 6 Replies
May 5, 2012
how do you make a fake error popup window?
View 1 Replies
Dec 27, 2009
I want make a antivirus a real that can find everything iwant a tutorial that haves pictures how to do it
View 2 Replies
Jun 20, 2012
i want to make fake progress bar when i click on the button:
for i = 0 to Maximum
progressbar1.value = progressbar1.value + 1
next
but the progressbar.value = 100 Too fast
View 3 Replies
Apr 16, 2009
I know you can use regex to verify an email address format, but is there a way to, outside of sending an email to the address to verify that an email address is actually a working email address?
View 4 Replies
Feb 20, 2011
I need to make a program for a fake/hypothetical company.The "company's" pricing is based on the number of days of the rental as detailed below; note that all time beyond a half day is counted at the full day or weekly rate. In addition, they offer insurance for their vehicles at a daily rate; insurance is mandatory for half-day rentals, and is only available at the full-day rate. The charge rates are as follows:
Half Day $20.00
Full Day $35.00
Weekly (7 days or more) $32.00 / day
Insurance $5.00 / day
And 8% sales tax has to be added on.
View 11 Replies
Aug 27, 2009
I'm trying to create a fake virus for a collegue who keeps changing our desktop backgrounds. I have created a form in vb 2008. It as a window security icon and coule text boxs saying virus has been found, it has 3 buttons (Repair), (Quarantine) & (Ignore) and a progress bar on the form. I have put a timer event on the form too. My question is: How can i get the progress bar to pause at 50% and say files cannot be repaired, once ok is clicked on the pop up msgbox asking to Quarantine items, pause again on say 85% and msgbox say Cannot be repaired, try restart and run anti virus software.
View 14 Replies
Sep 23, 2011
I have a .net application that uses customerrors web.config module to display meaningful messages for errors. It works without any issues for 500 errors/exceptions caused by non-ajax and ajax components (updatepanel). However, in a scenario where updatepanel's asynchronous request times out, there is no error raised at all. I was able to see the timeout in firebug and come up with a solution that would at least display the error message as an alert and then redirect the user to the 500 error page using javascript but it's not quite doing what the rest of the application does in case of an unhandled errors like these. I basically just want everything to go through "LogEvent" mechanism so based on the severity of the error, it does the necessary work.This 500 error page doesn't have anything in the Server.GetLastError() for these timeout scenarios. Is this an expected behaviour? Can it be changed so I do have access to these timeouts in Server.GetLastError() OR maybe just run this error through "LogEvent" mechanism? Is there a better/more graceful way to handle this issue?
Below is my code to give you an idea, not exactly what I have in my application but pretty close.
Web.Config
<customErrors mode="On" defaultRedirect="~/Errors/ErrorUnknown.aspx" redirectMode="ResponseRewrite">
<error statusCode="500" redirect="~/Errors/Error500.aspx" />
</customErrors>
[code]....
View 1 Replies
Jan 4, 2012
So when i build or click debug on my program. No errors come up and its smooth. So i decide to publish my programme. However. I come up with a bunch of errors during the publishing.
Here they are:Error 1 Cannot publish because a project failed to build. 1 1 Simple CALC
Error 2 Unable to copy file "binReleaseSimple CALC.exe.manifest" to "binReleaseapp.publishApplication FilesSimple CALC_1_0_0_0Simple CALC.exe.manifest". The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
View 3 Replies
Jun 23, 2012
This was an experiment to see if I could create a fake array using generics instead of using an array. I decided to try it, because I may use it if I find any advantages to using it over an array. it works, I am just asking for a second or third opinion, have I screwed anything up, or is there an easier way to accomplish this? If I use it, it will be for a 2D game I am creating, and is used to draw the 2D screen graphics, placing an image based on what image identifier is located at what coordinates. The value stored in the fake array is an integer that disignates the graphic to draw and whether it is passible or not, i.e. 0 = a floor image, 501 = a wall image that is impassible (any image number > 500 is impassable) The Class definition:
[Code]...
View 5 Replies
Jun 29, 2010
I've found several articles/examples of connecting to SAP using VS03 however not with using only VS08. I understand they are working on a new connector (3.0) but need to connect now.
View 1 Replies
Mar 31, 2010
I have a program written in VB.Net (Visual Studio 2008) that uses a DLL written in Visual C++ by another developer. I'd like to be able to step in to the C++ code as my code makes calls to methods in the DLL. Since the DLL is it's own solution, I don't think it can be included in my solution/project. I tried putting the DLLs pdb file in the debug/bin directory with the rest of my build and pdb files. However, when I get to the point in stepping through my code, and it gets to the dll call, it just steps right over the dll code. Do I have to manually load symbols?
View 1 Replies
Jul 12, 2008
I am running on XP SP2 on my Intel C2D, and have VS 2005 on .Net 2.0 Now, can i install the new VS2008 and still have my vs2005?Can I have the both installed and still statisfy the following ?Can I have VS2005 and VS2008 on the same machineCan I do projects for Dot net 2.0on VS2005 while have VS2008 Can I have both .Net 2.0 and .Net 3.0 withouth any problem?Can I still work on my old project in native VS2005 ? Can I work on old .Net 2.0 project in the new VS2008 ?Can I Migrate some of my projects to VS2008 ? Can we also migrate .net 3.0 projects back to .Net 2.0 to work on VS 2005 ?
View 7 Replies
Mar 3, 2009
Am currently developing web based applications using VS2005, i want to shift to VS2008, what are the things that i do have to take into consideration.
View 1 Replies
May 31, 2010
we are working on migration project VB6.0 to VS2008 ( Vb.NET 9.0) .In Vb6 we have .hlp file it will open appropriate help page/content when I click F1 from any of the forms. The same need to achevie in .NET 2008 . I came to know that .NET 2008 help provider will not support .hlp files. below code used in vb6
App.HelpFile -
Me.HelpContextID
View 2 Replies
Dec 8, 2009
I had a support reply saying I needed to have VS2008 SP1 update installed. I clicked the About menu item for VS2008 and it shows SP1 under Microsoft .NET Framework Version 3.5 SP1. But on the left side for Visual Studio 2008 there is no SP1. Is the framework what they are referring to?
View 5 Replies
Nov 2, 2010
I have a VB6 Project which I need to build in VS2008.
i tried to open vbp file in VS2008, it opened a VB Upgrade Wizard and created a new folder with in my VB6 Project Folder.
At this point I am completely stuck.
Is there anyway to build VB6 in VS2008 or Do we have any free tools to convert VB6 to VB.Net.
View 5 Replies
Jul 31, 2009
On my last machine I had created a way to see a GUID variable while debugging by hovering over it. I don't remember what it was (a visualizer?). I have a new 64 bit machine with vs2008 - is there anyway to mouseover a guid value and have it appear? What makes guid's so special that their value doesn't show like most variables?
View 3 Replies
Jan 27, 2010
I live in the UK and I want to buy the standard edition cheaply. I've seen an OEM version on eBay which the seller claims to be the full version. But it's only one a single disk and it states "Disk 1" so presumably it isn't the complete application.
View 12 Replies
Aug 8, 2011
I am programming in both Matlab (Matlab2011a) and Visual Basic (VS2008).I've created a .exe file from my matlab code. It works well when I click on it with my mouse. But I need to run it within Visual Basic. I know it's possible to call .exe files with Shell() or Process.Start(), and it works well for files such as firefox.exe or notepad.exe.
However, it doesn't work when I call my own .exe file ... It's weird because when I look to the Task Manager while trying to call it (within VB), I can see the process starting and ending, but its output doesn't appear.
View 4 Replies
Jan 16, 2008
I wanna use axWebbrowser in VS2008. Is there a way of doing so?
View 7 Replies
Jan 21, 2010
I've created a dll in VS2010 with.NET Framework version 4.0 Now I want to add this dll as a reference in a 3.5 project in VS2008. When I do this I get <The System cannot find the reference specified>... does someone has a solution for this issue. When I downgrade the dll to version 3.5 I can add it as a reference and all works ok, but downgrading to 3.5 isn't an option because other dll's are depending on the 4.0 framework.
[Code]...
View 3 Replies
Dec 19, 2007
am using visual studio 2008 professional edition and MS SQL Sever express 2005 SP2.i clicked Data then Add New Data Source choosed Database then click Nextwhen i clicked on New Connection the Data source configuration wizard disappears.
View 14 Replies
Aug 25, 2009
I have a project that I am testing with Windows 7, its almost complete but doesnt function without elevating the users permissions, I've tried a few of the sample codes I've found online and they don't seem to work... This has been tested on a admin account, but still requires elevated privaliges... I believe becuase it directly effects critical and non-critical windows services (starting, stopping, retreiving the status, enabling or disabling them)
[Code]...
I understand the UAC could be used to implement this "admin only" restriction, but as I havent even tried using the UAC Settings area yet. As I said, a link to helpful content would be cool, an example would be great.Running Visual Studio 2005 under a Visual Basic Environment.
View 4 Replies
