Is there any box type in vb.net that is multi lined, however stays as a single line and when you click on it , it will open up into a multi lined box (because I want 10 of them in a small area , in single lines will be perfect but needs to have lots of information stored in each one) and then when the user clicks out of the box / into the next one, it returns to its single lined state?
View 8 RepliesOkay so I'm making an on screen keyboard, and was wondering - when I click something in the background, my form stays on top, how can this be accomplished? Can someone point me in the right direction?
View 5 RepliesI have a button on my form where I'm showing a ContextMenu when the user left clicks on it, I'm actually using MouseUp right now to show it.What I would like to have happen is the user click on the button, the button stays pressed while the ContextMenu shows, it returns to normal when the ContextMenu closes (Either a menu item was selected, the user hits the escape key or they click/tab to somewhere else). Also I'd like to position the ContextMenu in the lower left corner if the menu opens down or the top left corner if it opens up. So the left edge of the ContextMenu is flush with the left edge of the button.Moreso the button staying pressed until the ContextMenu is closed.
Edit: I'm also ok with this being it's own control inheriting the FW's Button that used the assigned ContextMenu as well.
a user copies multiple lines of text (say, from an email) into the clipboard. Based on my observations, when one tries to paste the text into a single-line textbox, only the first line is actually pasted in. (I am aware that the "obvious" solution would be to set the Multiline property to True, but there are reasons I am looking to avoid this and to put multi-line data into a single line.)
In the TextChanged event handler, I wrote code that parses the clipboard data to successfully convert it to a single-line, comma-delimited format.
Private Sub txtMassTrackingNo_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) _
Handles txtMassTrackingNo.TextChanged
[Code].....
I created a button control ,, by double clicking only the process was going on,,when iam single click the button nothing is to be happenend,,so i want to change into single click insted of double click........here my coding is given below.......
<asp:Button ID="getrec" UseSubmitbehavior ="false" runat="server" Style="left: 30px; position: relative; top: 0px; z-index: 101;"
Text="Get Record" />
[CODE]...
Here the coding is all are correct but the problem is when double clicking the button only it was worked ,,,iwant want to change it into single click
how do we call double click on single mouse click event? Iam doing this and it's not working.
Private Sub RichTextBox1_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles RichTextBox1.MouseClick
RichTextBox1_MouseDoubleClick(sender, e)
End Sub
I have a grid that displays data from a binding source. I have a method to handle the CellContentDoubleClick which will get the value of the cell and use that to do a new look up. This will generate a new datasource (with different columns) which I then rebind to the grid.
My grid double click works, but when it repaints with the new data, a single click fires the double click. I have no code in place to handle a single click .
The interesting thing is that it is (in my case) a toggle. If I double click, on the repaint, a single click fires the double click code. When it repaints again, I need a double click .
The double click code fires off a messagebox - if I tell it not to continue, then I have to double click to get it to fire again. So it is not dependant on what data is displayed.
I have a grid that displays data from a binding source. I have a method to handle the CellContentDoubleClick which will get the value of the cell and use that to do a new look up. This will generate a new datasource (with different columns) which I then rebind to the grid.
My grid double click works, but when it repaints with the new data, a single click fires the double click. This happens whether or not thre is a single click handler.
The interesting thing is that it is (in my case) a toggle. If I double click, on the repaint, a single click fires the double click code. When it repaints again, I need a double click.
The double click code fires off a messagebox - if I tell it not to continue, then I have to double click to get it to fire again. So it is not dependant on what data is displayed.
When it is in the mode to respond to a single click, I can tab through all the controls and then click on any cell in the grid and it will still fire the double click.
No matter what I try to do (set focus to other controls, refresh the grid, etc.) nothing seems to reset the grid so it works consistently.
How to make a single click on mouse to double click, may the story like this :if i press left mouse button, that mean i press double click left mouse button..I'm using Vb.net but if the code for it only in another language like C++, C# or Js, no problem but if you want, please give me an example.I want to use that method for playing game house. That game make me always to double click mouse.
View 1 RepliesVS 2010 Single click for Triple click
View 22 Repliesi have problem in displaying a single line in different line...
my code is
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.TextBox5.Text = Me.ListView1.Items.Count
[Code].....
I have a situation where I am handling both single & double mouse click events on a form. In both cases something has to be loaded, however when a double click occurs, I do not wish to execute the code attached to the single click event.Is there a way to intercept the mouse click's and check if double or single and then execute the right event appropriately?
View 2 RepliesIs there any way I can put Public Properties on a single line in VB.NET like I can in C#? I get a bunch of errors every time I try to move everything to one line.
C#:
public void Stub{ get { return _stub;} set { _stub = value; } }
VB.NET
Public Property Stub() As String
Get
Return _stub[code].....
How can you write a #If statement on a single line?
vb.net
#Const Debug = True #If Debug Then Console.WriteLine("Debug")'I also tried:#If Debug Then : Console.WriteLine("Debug") : #End If'
But that didn't work either?
I wrote very simple code to send emails. I wish that end users who do not have .NetFramework installed, could also install this application without installing Net Framework.
View 2 RepliesHow do I read a line from a database using WHERE? I've read this post but it doesn't really cover it and the forum search throws out the words, 'From' and 'Where' as being common. This is my bit of code but it just skips over it as if it doesn't exist so presumably there's an error, I dunno. I'm trying to read an entire line from the database where it equals the value of 'getweek' where 'getweek' is a variable.
[Code]....
I'm using Visual Basic 2008I've been trying to create a auto typer where I can put a whole page of words into a rich text box and the auto typer then pumps the words out one at a time.The code that I use is:
Timer1.Interval = TextBox1.Text
SendKeys.Send(RichTextBox1.Text)
SendKeys.Send("{Enter}")
That code would just type all of the words at once. Also, I'm putting the words in a rich text box. How could I save the rich text box so that each time I load up the application it still has all of the words in it?
give me a working regex expression (C#/VB.NET) that can remove single line comments from a SQL statement ?I mean these comments:
-- This is a comment
not those
/* this is a comment */
because I already can handle the star comments.I have a made a little parser that removes those comments when they are at the start of the line, but they can also be somewhere after code or worse, in a SQL-string 'hello --Test -- World' Those comments should also be removed (except those in a SQL string of course - if possible).Surprisingly I didn't got the regex working. I would have assumed the star comments to be more difficult, but actually, they aren't.
As per request, here my code to remove /**/-style comments (In order to have it ignore SQL-Style strings, you have to subsitute strings with a uniqueidentifier (i used 4 concated), then apply the comment-removal, then apply string-backsubstitution.
static string RemoveCstyleComments(string strInput)
{
string strPattern = @"/[*][wds]+[*]/";
//strPattern = @"/*.*?*/"; // Doesn't work
[code]....
How would I go about changing the text in a richtext box on a single line?I'd like to have a bold line in my box state that the chapter in my game has changed, as well as that the journal has been updated..here's a suedo version of what I mean...
Code:
If Selection = 7 And Chapter = 1 And ForrestSwitch = False Then
rtxOutput.Font.Bold = True
rtxOutput.text = "Chapter: Misty Cave" & _
Environment.Newline + Environment.Newline + "Journal is Updated" & _
[code]....
How can I read a text file so that each line in the file is added to a string collection? Also, if I would like to read only the 5th line in the text file, how could I do that?
View 4 RepliesFor example the user has typed a list of names in a text field (1 on each line)
jerry
mark
mark93
ewji84
fjkewo93
the program will auto fill this in the submission form jerry
when it finished the first registration now moves on to the second string:
mark
and so on....
I already made the multiline text boxes and the main functionality of my bot,
all I need now is the program to submit multiple keywords from user input and it should be 1 keyword in the field per submission.
I have a single data type, and when debugging, I found the value of this data type is -1.#IND
What is that -1.#IND?
Can you set a condition inside the string.format parameter.So if i have
string.format("{0}" , if x = 7 then return "SEVEN" else return "ZERO")
Is there a way of doing this?
Just suppose that I define a structure, and an array such as
Structure Person
Dim First_Name as String
Dim Last_Name as String
[code]....
Can I fill in my list of people using a single line of code for each record? Something like this, it doesn't work, but this shows the sort of thing I mean.
My_List(0) = {'John', 'Smith', 24, '555-1234'}
My_List(1) = {'George', 'Jones', 31, '555-8123'}
My_List(2) = {'Tom', 'Green', 40, '555-3434'}
It's easy enough to fill it in line by line. I could do that without problem. But I want to be able to look at the code and see the contents of each line. Doing it as above would make it easier to read.I could make it a multidimensional array of strings, rather than a structure.If it makes any difference I'm using Visual Basic 2005 Express Edition.
I have problem with getting a single line text from html webpage. I have searched for it but when I try that code:
Private Shared Function GetTitle(html As String) As String
Dim r As New Regex("<title.*?>")
Dim Title_start As Integer = 0
Dim Title_end As Integer = 0
For Each m As Match In r.Matches(html)
[Code] .....
Then it gives me a error: REXES IS NOT DEFINED. Also I am using Visual Studio 2010.
I use a single instance in my application. What if I give command line arguments to the exe of my program, so I can be selective in what was given command line in my program, but still single instance?
Example:
test.exe /show
When the command /show, then my program will
Form2.Show
Form2.BringToFront
Is there a program where i can launch a website, click on a button or textfield and it will give me the getElementByID? I searched around for this and i have found nothing? Why doesn't this exist? I am writing a program that will enter information into a copiers web interface for scanning. The problem is the copier's web interface uses Java and XML. I cannot get my program to enter the information into the apprioate field because i cant find the tag to reference it! its very annoying, this is the last stage to my program.
View 1 RepliesI found this piece of code in a Youtube video, that used it to save a file via a normal save dialog, all i intented to do was remove the dialog and simply save the file with no warning.
The problem now is that it says that the "Hula" String is not a part of a string, and im kinda lost.
Code:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim myStreamWriter As System.IO.StreamWriter
[Code]......
i am using vb.net 2005, in windows application, i have controls like textbox, listbox, radiobutton in one form, all the controls are required to fill, how can i validate all controls in one buttonclick..
View 4 RepliesHow can I paste a multiple line text into a single cell?I tried sendkey {F2} but Excel does not run macro in edit mode.
View 1 Replies