Change All Fonts Of Controls In A Form?
Jun 23, 2010How can I change font of all controls in a form at same time?
have a Way?
Obs: not when executing...
Visual Basic 2010;
ADVERTISEMENT
Resize Fonts And Controls And Forms
Mar 15, 2011I would like to resize to increase or decrease font size in a form.Is there a way that one can also scale up this with repect to the controls the fonts are in.
View 2 RepliesChange Fonts In Listview?
Apr 22, 2009Currently i have a listview control set up with 4 column headers.
how to code it so that the text input into the listview changes font size and color in just 1 of the headers?[code]...
Change Fonts In StatusStripLabel?
Oct 17, 2010I use the following code to change the parameters in my StatuStripLabel
Dim ItemImage As System.Drawing.Image = iImage
Dim item = New ToolStripStatusLabel(sText, ItemImage)
item.BorderSides = ToolStripStatusLabelBorderSides.All
[code].....
Appearing To Change Controls On A Form?
Aug 31, 2010VBExpress 2010 .Net 4.0 I'm trying to have a form that you click on a button and it goes to a new page of the same size in the same location. An example of this type of thing would be the different pages of an install wizard. In this particular project, I have an "instructions" page that you click on that takes you to a new form. On this page is a "back" button that takes you back to the main screen. I'm just not sure how this type of thing is normally done. What I have done works, but you can see the page 'flip' a little, and the form button on the taskbar disappears and reappears as the new one loads.
[Code]...
and I have an equivalent subroutine on the other form to get back. At first I had the Three middle line of code interchanged, which looked much smoother, but for some reason it didn't work on the first click, upon which the form would suddenly move to the wrong location, after which it would work fine, no matter where I moved the form.
I have a feeling that this is probably done in a completely different way, but can't think of a better way of doing it. One way would be to just use one form and change the controls instead, but it would get quite cluttered.
Cannot Change Position Of Controls On Form
Sep 6, 2010I am using VB2008 Express. After making changes to the position of controls on the form, the controls position reverts to the original position when the program is rebuilt and run. At first, there is no problem, but after 30 minutes working with the program, the problem begins. I am careful to keep all the files together. I am using XP Professional and .net 3.5
View 21 RepliesControls Change Place And Form Size Changes
Aug 13, 2011I have designed a form in VB.NET. At design time I have placed two buttons on it. When I run it, the form size looks smaller and the buttons I have placed at the bottom are not visible. Also the alignment of the text and picture box is also different from what I set at design time. Computer at which I am running the form is using a different resolution.
View 2 RepliesRead From .txt File And Change Controls In Form?
Jan 4, 2012I have a .txt file constructed like this:
Man C vs Liverpool:Aston V vs Tottenham:
3,00:4,00:6,00:
False:True:False:
Im thinking an Array for each line. Each input in the Array separated by ":". Then I would like to fill the controls in my form.
Found a post from .paul. so it should probably be something like this:
Public Class Form1
Dim lines() As String = IO.File.ReadAllLines("c: estfolder1 est.txt")
Dim textboxes() As TextBox = {TextBox1, TextBox2}
Dim checkboxes() As CheckBox = {CheckBox1, CheckBox2}
[Code]....
VS 2008 - Change Multiple Selected Fonts In Richtextbox
May 17, 2012iam using this code to change the font in a richtextbox it's work if user select a single font if there are multiple fonts, and font sizes it dosenot work
[Code]...
Asp.net - Change The Values Of The Controls In The ASPxGridview Edit Form
Jul 11, 2010I'm trying to change the values of some of the controls in the ASPxGridview Edit Form, however they are not changing. It seems to be resetting? How can I do this and in which event would I do this in?
View 2 RepliesChange The Size Of Child Form And Add Controls From Parent In A Showdialog Mode?
Mar 17, 2012I have an outlook application, whenever the user receive a new mail I show him a form and some controls
The user needs to insert information and close the form. Sometimes the user is not near his machine so whenever there is a new mail I am adding new controls and modify the child size.
It has been successful using the Form.show() method but not in showdialog() i cant add controls and change the form size can someone please help on the subject?
[Code]...
Form Fonts And Size ?
Jun 22, 2010I am struggling with this issue, which is probably something simple. How do you change the font style and font size while a VB application is running? I want to to be able to choose a different font and size based on choices from the ToolStripComboBoxe(s).
View 10 RepliesChange The Controls Opacity Without Change The Form Opacity?
Jul 29, 2009I want to change my controls opacity .I know how can i change the form opacity but I want to change the controls opacity without change the the form opacity , such as : "I want to set my form opacity = %100 and the button opacity = %50 " or "I want to set my form opacity = %50 and the button opacity = %100 " I'm using visual studio 2005 .net .I want to do that in basic language
View 3 RepliesAdd Controls To A Form In Code And Set The Properties Of The Controls?
May 24, 2009How can I add controls to a form in code and set the properties of the controls using the With statement?Also I would like to know how to add a container control and then add a control to that container.
View 2 RepliesControls Not Return All The Child Controls For The Form?
Apr 15, 2010I have a slight problem With an enumaration of child controls on a form. The following code will not get but about have the controls that are on the form. The controls show that the count is correct but when it goes through the loop it skips over some of the controls. If you run it through the enumeration two or three times it will get all the controls a few at a time. The solution uses two forms, one that has the controls and the other that labels are made and displayed on. The Tx is just a index to add a number to the label.name and rename the label. So each label is identified seperately. This works for all the the controls that are seen in the for each loop.
View 11 RepliesPass Usercontrol Controls Or Form Controls?
May 11, 2009I created a class that can take either usercontrol.controls or form.controls as a parameter,how can i pass either to that class? as a property or how?
View 4 RepliesChange Controls Size And Location Based On The Change Of Font Size?
Jun 14, 2010I have the Context Menu Options like ( Small Font , Large Font ) based on the selection I want to change the size of the Font in the Controls,Control's Size & location(x,y,height,width). The resize of the controls should not affect the look and feel of the forms.
View 5 RepliesAccessing Controls Within Controls On A Form
May 26, 2012I have a module level sub that I use to clear text fields etc on my forms:
CODE:
The problem I have is in the last few lines of code as I'm not really sure how to access the text boxes contained within the tab controls (of which there are many tabs and many text boxes).
This is the closest I've got but I am getting an "option strict on disallows late binding" error on the tabCtl in the following line.
Controls Change Look At Runtime?
Mar 10, 2010I did something that when I now load my program(VB 2008), my controls; combo boxes, buttons, progress bar, etc. look like they are from VB 2005 or like VBA buttons, not the rounded edge buttons of 2008.
They look like vb 2008 controls while I am in design view, but then they change their style when I run the program..
IDE :: Change The Default Value(s) Of Controls?
Jan 31, 2012Is there any way to change the default value(s) of controls? How about setting the default value of Textbox.Multiline to True which would make it easier to arrange on the form.
View 2 RepliesChange Index Numbers Of Controls?
Jun 1, 2010I have a panel with pictureboxes in it. And I'm using
vb
DirectCast(Panel1.Controls(indexNumber), PictureBox).Image
to assign images to them. But the indexes are a bit messed up and I would like to arrange them a bit nicer. Is it possible?
Change The Properties Of Multiple Controls Using For - Next?
Sep 29, 2010In my project, I am trying to change the visible property of my various pictureboxes using a for - next statement. My aim is to get the value of my numericupdown1 control and use this number to make the pictureboxes visible. For example, if this number is 8, the picturebox1, picturebox2, .......8 will be visible. Here is the code I wrote:
[Code]...
Change The Visibility Of Controls On Timer?
Dec 31, 2010How to change the visibility of controls on timer
View 2 RepliesChange Toolbox Item Controls?
Aug 26, 2010is it possible to group similar controls in a form so instead of having to change every control's property I could just change the property for the entire group?
View 1 RepliesCheck Value Change - Multiple Controls
Sep 29, 2010This sounds simple and I'm sure it is. I have a form with textboxes and combo boxes within a tabview that has 8 tabs. All the data is loaded from a database. The user has the ability to update these controls and then update the record in the database. Is there a way that I can check an entire tab view or group of controls for value change other than using an if statement to cycle through each control? Something to the effect of If TabControl changed, then execute...
View 2 RepliesVS 2010 Loop Through Controls And Change Value?
Oct 22, 2010I want to reset programatically the values of all the labes on my form for example label1.text=1, label2.text=2 etc etc (there are 90 in total)
I came up with:
Dim i As Integer = 0
For Each objcontrol As Control In Me.Controls
If objcontrol.Name = "Label" & i Then
[Code]....
Write Controls Text Into A .txt File And Read Them Form .txt File To Controls Again?
Jan 16, 2012I have a form. And some controls(such as TextBox,ComboBox,etc.) on the form.Now,I want to store the controls' Text into a .txt file(or any other formarts).Then I want to read the text in the .txt file to my controls.
View 10 RepliesAsp.net - Loop Through Controls And Change LINQ Columns?
Jun 29, 2010I have the following code:
Dim i As Integer
For i = 1 To 20
Dim captionTextBox As TextBox = DirectCast(Me.FindControl("news_Image" +
[Code].....
Where the comment is in the code above, I need to insert the value of the textbox (text) into Linq columns. For example: articleToUpdate.news_Image1Caption, news_Image2Caption, but I need to change the number after news_ to the value of i in the for loop.
Change A Controls Background Color When It's Disabled?
Jan 13, 2009Is there a way to change a controls background color when it's disabled. The problem is its grey on grey and hard to see.
View 5 RepliesVS 2008 Change Default Naming Of New Controls
Nov 24, 2011I was just wondering is there a way to change the default name when you add a new control? I like to name my controls btnSomething etc... and if i could change the default names of added buttons from Button1, Button2 etc to btn1, btn2 etc.It will save me time when renaming.(Same applies for toolstripmenuitem buttons)Actually what would be ideal is if when i add a button, i directly go to the input for Text, and when i change that for the first time (like with toolstripmenuitems) the name changes according to the text (e.g. when you add a toolstripmenuitem in a context menu strip, if you set the text to "Reset" the name becomes ResetToolStripMenuItem. It would be awesome if i could make it automatically name to btnReset for buttons and tsmReset for toolstripmenuitems.)If there is a way to do this, even a difficult and not exactly pretty one involving macros and an input box, i would like to know
View 4 Replies