Comparing The Assembly Name Resulted In The Mismatch: Revision Number?
Nov 23, 2010
I have a VB.net 2005 project MyProject.exe which is referring to a strong named dll ReferenceDll1.dll in its references. The ReferenceDll1.dll is referred as Specific Version=False. The version on the strong named reference ReferenceDll1.dll was 1.0.1.2 when I compiled my project. Few days later, I got updated ReferenceDll1.dll as 1.0.1.3. Replacing this dll in the install directory fires following exception.
System.IO.FileLoadException: Could not load file or assembly 'ReferenceDll1, Version=1.0.1.2, Culture=neutral, PublicKeyToken=0242eaa067ef8af5' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
[code]....
View 2 Replies
ADVERTISEMENT
Jul 10, 2009
I want to compare each row in Table1 with Table2 and also all the columns in each row.I want to do the following1. Get Row1 from Table1. Check if the same row is present in Table22.f Row1 is present ,Check every column in Row1 with corresponding columns of that Row in Table23. Bind Table1 to a Grid. Highlight the changed cells in Red.
View 11 Replies
Oct 10, 2007
I just want to know if the following behavior is by design. I start Visual Studio and open my VB project and rebuild it. The assembly version is set to 1.0.*. I get a version number of 1.0.2839.26817. Now as long as I keep visual studio open every time I rebuild, I get the same build and revision number. I have to close and reopen visual studio to get the revision number to change. Again I just want to know if this is by design since everything I have read says that the revision number is either supposed to be random or the number of seconds since midnight. Is there a way around this?
View 3 Replies
Dec 5, 2008
While versioning a .NET 1.1 assembly using Visual Studio 2003, is it possible to generate one without build number and revision. I would want just the major and minor version.
View 1 Replies
Aug 23, 2010
When you right-click on a file and select the property information for that file, in the Summary tab, there is a listing of various properties for that file.(Title, Category, etc)Is there a way to access that particular property data from Visual Basic?I'm specifically interested in trying to access the Revision Number property of a given file.
View 2 Replies
Feb 5, 2012
I am using Git for source control on a .NET project. Is there any way to include the current Git revision number in my EXE upon compile time?
I'd like to be able to have the revision number available for an "About" dialog, or similar. Perhaps there is a way to update Settings.vb right before build?
View 2 Replies
Apr 24, 2012
I am trying to use Ajax control toolkit in asp.net website. I copied the dll from one of my previous sample project. It has the following details
Assembly Version - 3.5.40412.0
File Version - 3.5.40412.2
Internal Name: Ajax Control Toolkit
Language : Neutral
Product Version - 3.5.40412.2
When I add reference to this assembly, it appears as "AjaxControlToolkit-3.5.40412.2" in the reference list. When I run the solution, I get a FileLoadException: Could not load file or assembly 'AjaxControlToolkit-3.5.40412.2' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
View 1 Replies
Sep 20, 2009
when I generate my <appname>.exe file, the summary properties fields are all empty. There must be a way I can add this, but I haven't found it yet. I am running VisualBasic .Net 2003 standard edition.b
View 10 Replies
Oct 20, 2009
This is my code, and when I run it, it says type mismatch, and when I try to debug it, it highlights this line "If strVowel = Chr(65) Or Chr(101) Or Chr(105) Or Chr(111) Or Chr(117) Then"
Dim intX As Integer
Dim intY As Integer
Dim strVowel As String
Dim strInput As String
Private Sub cmdCount_Click()
[Code] ....
View 2 Replies
Apr 11, 2011
i am trying to compare user input number to with strings. i want the users to only input numeric values in a text box. but if they input a string i want an error message to go inform then to input numbers. this is the code i have:[code]
View 8 Replies
Dec 15, 2011
how to comparing the input of the textbox with respect to the given text and the number of error in typed textbox?
View 1 Replies
Aug 16, 2010
I am having troubles on what each of these mean.Mayjor, Minor, Build and Revison mean.I found a link to a topic like this, but I totally did not understand it.how to I apply the version details? I went to the properties of my progect and when to the publish tab, and set it in there, but when I right click on my application, it still always says, 1.0.0.0.How do I make it so it will say the version that I have it set in the publish tab?I am not publishing them to the internet,I don't have and FTP or what ever you need, plus I don't think there is a point to publish my programs, they are low level compared to everyone else who programs.
One more thing.If I want to make it so the application is done for that version, and is ready to be used on other computers, should I just use the app that is in the debug folder, or should I build it, then use the one that would be in the release folder, or is there something better that I should do?
View 6 Replies
Nov 15, 2010
I'm doing some maintenance on some software originally built by my predecessor at the company (who has since moved on to greener pastures). I'm currently rolling out a new version of the software. At this company, the installation procedure is basically to just shove the /bin/Release directory out into our automated program updater's magic directory, allowing it to automatically copy the contents of that directory over to the local /Program Files/ and let the magic happen. The magic always seems to happen, so there's no big issue, there, although it does weird me out somewhat, after many years of .msi installers...
[Code]...
View 2 Replies
Dec 28, 2005
When running setup to install published program, the following message occurs: System Update Required: Unable to install or run the applicaiton. The application requires that asssembly CrystalDecisions.CrystalReports.Engine Version 10.2.3600.0 be install in the Global Assembly Cache (GAC) first. This version is listed in the references of the program and in my mind, be included in build. How do I get by this error?
View 23 Replies
Apr 18, 2012
When running setup to install published program, the following message occurs: System Update Required: Unable to install or run the applicaiton. The application requires that asssembly CrystalDecisions.CrystalReports.Engine Version 10.2.3600.0 be install in the Global Assembly Cache (GAC) first. This version is listed in the references of the program and in my mind, be included in build. How do I get by this error?
View 2 Replies
Dec 4, 2009
I have recently upgraded an VB6 project to vs2008. I was almost finished when the following error occured. Unable to emit assembly: Referenced assembly AxInterop.MSFlexGridLib does not have a strong name Prior to this error appering, I tested my app several times and it was fine. Only after publishing it did the error appear. I have tried all solutions I could find, but nothing helps. I have read [URL]
View 1 Replies
Jun 17, 2009
I receive this error as "Assembly Load Error" whenever adding a form or other object that has to be inherited.
"Unable to load assembly. Ensure that the file is a valid .net Framwork assembly"
View 1 Replies
Apr 2, 2012
I am loading an Assembly using Assembly.LoadFrom() as the assemblies are located in a different path from Application Base directory.
Dim oAssembly As Assembly = _
Assembly.LoadFrom("C:\MyFolder\" + ddlXlate.SelectedItem.ToString() + ".dll")
And I consume a Type from that assembly without any problem:
oXML = CType(oAssembly.CreateInstance(sBaseType + ".XlateContainer"), _
XlateBase.XlateContainer)
However, the problem occurs when I try to use a Type from this assembly from within another method like the one below:
oComboBox.DataSource = _
[Enum].GetValues(Type.GetType(sType + "+ItemEnum," + sAssemblyName))
sAssemblyName is the one I loaded using LoadFrom() actually. After it said it cannot find the assembly, I used AssemblyResolve event which solved my problem :Subscribing AssemblyResolve event :
AddHandler AppDomain.CurrentDomain.AssemblyResolve, _
AddressOf MyResolveEventHandler
Event Handler Method:
Private Shared Function MyResolveEventHandler(ByVal sender As Object, _
ByVal args As ResolveEventArgs) As Assembly
Return Assembly.LoadFrom("C:\PSIOBJ\" + args.Name + ".dll")
End Function
And I thought maybe the error occurs because it cannot find a dependent assembly defined in assembly manifest file I loaded using LoadFrom() already but when I checked the args.Name, I saw it was trying to load same assembly and after that it worked without any problem. So basically a type in the loaded assembly cannot be found before the event adding change.
My old code was using AppDomain.CurrentDomain.Load() and Assembly.Load() methods and they were working fine without the AssemblyResolve event. I was able to reach types in dynamically loaded Assembly from every where within the same AppDomain.
LoadFrom() can find dependencies automatically within the same requested assembly path and that couldn't be problem as everything this dll needs was there. So at first it looked like a AppDomain problem to me as it looks like it seems it can reach assemblies from Load context instead of LoadFrom context and I am now using LoadFrom context.But now it seems I should pass oAssembly instance evertwhere to use any type from the loaded assembly?Doesn't it load the assembly where I can reach it everywhere (same AppDomain) using simple Type.GetType(...) method?
View 2 Replies
Jun 1, 2011
I'm wanting to include a system tray icon in my WPF project, and found this resource:[URL]..which looks like it will work beautifully, but it's written for C# and I'm using VB.net for this project. I downloaded his project and built the notifyicon as a DLL, then added as a reference to my project.
It throws up an error: Unable to emit assembly: Referenced assembly 'Hardcodet.Wpf.TaskbarNotification' does not have a strong name So I'm trying to figure out the best way to proceed. Do I need to strong name it, or is there a better way to do this?
View 2 Replies
Oct 9, 2008
I've got an exception when I deployed my application: "the located assembly's manifest does not match the assembly reference" What I remember is changing the project name from the previous source code, does it affect that much?
View 1 Replies
Jun 25, 2012
I have created several DLL (.NET) libraries that are used in several projects. In these DLL libraries I want to know/retrieve which assembly (EXE) calls/uses the library, so if possible I want to know info like assembly name (EXE), strong name, version number, etc.
NB: Examples may be in C# or VB. I use both languages.
View 2 Replies
Apr 7, 2009
I have written a .net assembly which plugs into to a third party COM application. The .net assembly is COM visible to the third party application. However this .net assembly references other regular assemblies. If I put these assemblies in the GAC the COM visibile assembly sees them without a problem. However for various reasons I do not want to put them into the GAC but I cannot get my COM visible assembly to see the other assemblies when they are in other locations. I have tried putting them in the same directory as the COM visible assembly. I have tried putting them in the same directory as the third party app's exe but neither of these work.
View 5 Replies
Apr 6, 2011
Ok so in my code i need a ****ing long as equation to draw a certain paint for getting the distance of a particle using the terminal velocity equation. which looks like this...
var.vt = ((2 * var.m * var.g) / ((var.fluiddensityp) * var.apaos * var.dragcoef)) ^ (1 / 2)
then pop that in here to get terminal velocity at a given time...
= var.xvalgraph1 * ((var.g * var.fluiddensityp * var.dragcoef * apaos) / (2 * var.m)) ^ (1 / 2)
terminalvelocityovertime = vt * Tanh(tanhx)
then as I'm drawing a graph i calculate the previous coordinate and join then with a line.so i need a value called previous which is where ever there is a var.xvalgraph1 it minuses what ever time increments have been set so alll var.xvalgraph1 turn to (var.xvalgraph1 - var.timeperpixel)
ok thats all fine this is where the equations get too much and i don't work
[Code]...
View 5 Replies
Feb 8, 2010
Why a variable defined as a long will not accept this number (2,148,532,224) with out throwing an exception of "Arithmetic operation resulted in an overflow." Looking at documentation it should be able to handle a value up to 9,223,372,036,854,775,807.
My code does some simple calculations and then tries to store the value in the variable.
Dim mdblTotalFileSize as Long = GetImageSizeBlocks * GetBlockSize
The value for GetImageSizeBlocks is 1049088 and the value of GetBlockSize is 2048 which equals 2148532224
View 1 Replies
Apr 21, 2011
I am new to programming with visual basic version 10 (I hope this is the correct forum).
I am using the following line in my program[code]...
I am getting the message that an arithmetic operation resulting in a math overflow.
View 3 Replies
Sep 28, 2010
For iLoop As Integer = 0 To length
Dim byte1 As Byte = Fs1.ReadByte()
Dim byte2 As Byte = Fs2.ReadByte()
Dim offset As Byte = Fs1.Position()
If byte1 <> byte2 Then
OffSetFS.WriteByte(offset)
OutPutFS.WriteByte(byte2)
End If
Next
Arithmetic operation resulted in an overflow.
View 16 Replies
Sep 28, 2010
Dim f1 As String = "File1Path"
Dim f2 As String = "File2Path"
Dim Fs1 As New FileStream(f1, FileMode.Open)
Dim Fs2 As New FileStream(f2, FileMode.Open)
Dim f1length As Integer = Fs1.Length - 1
Dim f2length As Integer = Fs2.Length - 1
[Code]...
Application.StartupPath & "PatchData.dat": PatchData.dat isn't created yet, but my program makes PatchData.dat, and PatchData.dat is ~8KB when my program gives me this error.
View 5 Replies
Jan 21, 2011
In this call to method SetVolume, Volume = 2055786000 and size = 93552000. Volume is an Integer property, and size is also Integer, as you can see.The class is a partial class of a dbml entity class, however this Volume property is NOT a column in the database, it exist only in the partial class, as a "business object property".
View 6 Replies
Jun 15, 2010
I am using the following code to add some value to a date:
Dim strdate As Date
Dim numinterval As Double
numinterval = 149548.720386359
strdate = DateAdd(DateInterval.day, numinterval, #1/1/1601#)
MsgBox(strdate)
The value numinterval is the number of days passed since 1/1/1601 (this is how date is counted for things like 'last logon time', 'last bad password' in Active directory). I do some calculation and get that numinterval value in days.. But since I want it to return the time more accurately, I tried first multiplying numinterval by 1400 for number of minutes.. And I changed the interval as dateinterval.minute... That worked fine!
But, when I tried again by multiplying it further by 60, to get the time accurately in seconds and changed the interval to dateinterval.second it throws the following exception:
Arithmetic operation resulted in an overflow
I changed the type of numinterval into long, but the same problem..
View 2 Replies
Jul 18, 2008
I do know invoking a methods labeled by ObsoletedAttribute should bring out a compiler errorBut how about the following codes? The caller aslo haved been obsoleted with true as the error parameter. How come it still produces the error?It's not a problem in C# codes.So how can I disable this annoyying error?
<Obsolete("This procedure has been obsoleted"
Public Sub Foo()
[code].....
View 7 Replies
