I just want to know if the following behavior is by design. I start Visual Studio and open my VB project and rebuild it. The assembly version is set to 1.0.*. I get a version number of 1.0.2839.26817. Now as long as I keep visual studio open every time I rebuild, I get the same build and revision number. I have to close and reopen visual studio to get the revision number to change. Again I just want to know if this is by design since everything I have read says that the revision number is either supposed to be random or the number of seconds since midnight. Is there a way around this?
While versioning a .NET 1.1 assembly using Visual Studio 2003, is it possible to generate one without build number and revision. I would want just the major and minor version.
When you right-click on a file and select the property information for that file, in the Summary tab, there is a listing of various properties for that file.(Title, Category, etc)Is there a way to access that particular property data from Visual Basic?I'm specifically interested in trying to access the Revision Number property of a given file.
I am using Git for source control on a .NET project. Is there any way to include the current Git revision number in my EXE upon compile time?
I'd like to be able to have the revision number available for an "About" dialog, or similar. Perhaps there is a way to update Settings.vb right before build?
I have a VB.net 2005 project MyProject.exe which is referring to a strong named dll ReferenceDll1.dll in its references. The ReferenceDll1.dll is referred as Specific Version=False. The version on the strong named reference ReferenceDll1.dll was 1.0.1.2 when I compiled my project. Few days later, I got updated ReferenceDll1.dll as 1.0.1.3. Replacing this dll in the install directory fires following exception.
System.IO.FileLoadException: Could not load file or assembly 'ReferenceDll1, Version=1.0.1.2, Culture=neutral, PublicKeyToken=0242eaa067ef8af5' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
when I generate my <appname>.exe file, the summary properties fields are all empty. There must be a way I can add this, but I haven't found it yet. I am running VisualBasic .Net 2003 standard edition.b
I am having troubles on what each of these mean.Mayjor, Minor, Build and Revison mean.I found a link to a topic like this, but I totally did not understand it.how to I apply the version details? I went to the properties of my progect and when to the publish tab, and set it in there, but when I right click on my application, it still always says, 1.0.0.0.How do I make it so it will say the version that I have it set in the publish tab?I am not publishing them to the internet,I don't have and FTP or what ever you need, plus I don't think there is a point to publish my programs, they are low level compared to everyone else who programs.
One more thing.If I want to make it so the application is done for that version, and is ready to be used on other computers, should I just use the app that is in the debug folder, or should I build it, then use the one that would be in the release folder, or is there something better that I should do?
I'm doing some maintenance on some software originally built by my predecessor at the company (who has since moved on to greener pastures). I'm currently rolling out a new version of the software. At this company, the installation procedure is basically to just shove the /bin/Release directory out into our automated program updater's magic directory, allowing it to automatically copy the contents of that directory over to the local /Program Files/ and let the magic happen. The magic always seems to happen, so there's no big issue, there, although it does weird me out somewhat, after many years of .msi installers...
I have the following code. When I use: For i = 3 To MaxColumnDataGridView DataGridView.Columns(i).DefaultCellStyle.NullValue = 0 DataGridView.Columns(i).DefaultCellStyle.Format = "N5" Next The columns format can't be changed. I cannot change the number format whatever I do.
This is probably an easy question: I need to change my version number from 5.4 to 5.5. This is not the assembly version, but the version (I think) of my executable.
I saved an images hash number to a database so that when my application pulls in images, I can compare this hash number to the hash numbers of the images comming in. The purpose is that if one of the images comming in has the same hash number, I can flag it. It seems that the saved hash number for an image is not the same for the exactly the same image when it has come in. Is this because the hash number for an image can change depending on the pc where its being created?
I have written a code that when the click the calculation the button a inputbox pop up and you enter in the income and then you enter in the expense. [code]...
Currently just started working with VS2008 I have a SQL script that is returning a number looking time in one of my columns (50625) which is 5:06:25 What I would like some help with is creating a function that would take this value and change it to a real time at some point I will need to do further calculation on these times so I need to be able to add or subtract these results.[code]...
My code gets a list of words from a txt file and chooses the words randomly. However, the same word can appear more than once and i need to know how to stop this from happeningHere is the code:
Dim aryName As String() = Nothing aryName = File.ReadAllLines(Application.StartupPath & "Randomfnames.txt") Dim randomWords As New List(Of String)
I have this recently converted application from vb6 to vb.net 2008. One of the errors stated is:'Point' is not a member of 'System. Windows. Forms. PictureBox'.I have searched and not found an alternative to this.Also, it says ReDim cannot change the number of dimensions in an array.
I would like to be able to create a function where I can change the probability of a number being outputtedI am creating (Well have created) a slot machine game but the outputs are completely random and I would like to change the odds. Is this possible and if so could someone show me or direct me in what I should do to create this function.
If there is a formula to change a latitude and longitude into a single number? I plan to use this for a database table in software that provides routing for deliveries. The table row would have that number as well as the postal address. The database table would be sorted in ascending numeric order so the software can figure out which address the truck would need to go to first, second etc.
For example I would use the following numbers for the latitude and longitude: Lat = 40.71412890 Long = -73.96140740
Additional Information: I'm developing an Android app using Basic4Android. Basic4Android uses a VB or VB.Net syntax with SQLite as the database. Part of this app will have route planning. I want to use this number as the first column in an SQLite table and the other columns will be for the address. If I do a query within the app that sorts the rows in numerical ascending order, I will be able to figure out which postal address are closest to each other so it will take less time for me to go from house to house.
For example, if the numbers were: 194580, 199300, 178221
I can go to postal address 178221 then to 194580 and finally to 199300 and I won't need to take the long way around town to do my deliveries after they were sorted. As an alternative, I would be happy if there was an easy way to call a web service that returns maybe a json response that has the single number if I send a postal address to the web site. Basic4Android does have http services that can send requests to a web site.
I am trying to learn how to use the modulus operator.this excersise is a change calculator and is supposed to calculate the number of dollars , qtrs, dimes, nickels and pennies from the change that is calculated.
in the form if i put a value in for owed = 30.00 and paid 34.25 my dollars returned = 4 and that is correct but the number of qtrs = 0 and should be 1. I am not sure how to correctly use this - any assistance you can provide is great - this is purely educational
Private Sub btnCalc_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalc.Click Dim owed As Decimal Dim paid As Decimal Dim change As Decimal
I have already a Pretest loop that counts the number that the user inputs and displays a message. I need to change the Pretest loop code so it will count down instead of up from the number of times entered by the user.I have already coded this:
vb.net Public Class frmMain Private Sub btnExit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnExit.Click Me.Close()End Sub Private Sub txtNumTimes_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles txtNumTimes.KeyPress
I'm looking to use a timer to change an image for a set number of times & then exit. Am trying the code below but although the TextBox check works the Image skips directly to the second from last & goes no further.
I have a program where I want my picture box to change depending on what number comes up in a textbox. Lets just say, my picturebox is called PictureBox1. I'd imagine I'd use an IF statement followed by the path type in to change the picture. My question is how do I display a new picture in the picturebox? Whats the code used?
I'm trying to dynamically create a listview. on reports.aspx user selects a bunch of checkboxes. On the next page, user sees reports.aspx, and should see a table with columns of the checkboxes he selected. My idea was to create a listview, then dynamically change the header row of the LayoutTemplate, then change the select statement depending on which columns selected. This is what I have:
Problem is that this doesn't work because i can't put a code block (<%%>) inside the LayoutTemplate. Is there a way in the code behind to edit the LayoutTemplate, or another way to cycle through the Request.Form vars and build the table header row with it?
The code below is the entire class that has the error in it... the errored code is highlighted in red. The error is,'ReDim' cannot change the number of dimensions of an array.
Code: Public Class clsMap Dim SR As System.IO.StreamReader Public Width As Integer Public Height As Integer
