Count Files In A Folder?
Jan 26, 2012
How would I go about counting specfic files in a given folder?I have for instance these files; 6-11715.jpg ,6-11715_1.jpg, 6-11715_2.jpg, 6-11715_3.jpg, 6-11715_4.jpg, 6-11715_5.jpg, 6-11715_6.jpg.
I want to be able to show the first picture then using a next button load the second picture and so on. When I get to the last picture I will repeat the process.
I'm thinking I need to count the files first based on the left string of the name to get the total number. then based on the number I can pull the fill with the file name change accordingly.
View 5 Replies
ADVERTISEMENT
Oct 8, 2011
i am using VB 2008 EXPRESS EDITION. i want to know how to build a program that counts how many files in a folder and checks if the number of the files are increasing or not per specific time (lets say 1 second) . if files are increasing then its okay, if not. then the program assume that the MAIN PROGRAM RUINING is halted and it must be restarted.
[Code]...
View 1 Replies
Jun 5, 2012
I'm trying to figure the best way to verify the contents of a folder based on another count via a listbox. Here is my current code to count the number of PDFs in two different locations and total them together for a grand total.
'counts test1 pdfs
Dim f As String, c As Long
[code]....
I have another process before this that will create the PDF's based on the files listed in the listbox.What I am having trouble with is verifying that the PDFs that are created in the Test1 and Test2 folders equal the counts from the listboxes. This count needs to match before running the next process. I'm kind looking for wait or loop until both counts match, again before running the next process.
View 2 Replies
Oct 28, 2008
I am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
View 5 Replies
Mar 4, 2010
in the current project im making i've decided to add in some tools, 1 of which is a renamer based of a renamer app that already exists (called scdtoolz), i want to build my own version of it so i can learn some new things, and build a nice GUI version of it.[code]So what i have managed to determine is that the current app scans the folders contents for the CRC32 Checksum, and renames based of that, since the 456.bin's CRC32 Checksum was 2274F80B, and in the text file 2274F80B is found here 'WWF - Rage in the Cage (T-81015)(U)#2274F80B#'So now i have determined game identification is based of the CRC32 checksums, how would i go about coding a similar ap in vb.net?first i need to make the app scan a folder, but how to return crcchecksum? and then rename if check = XXXX? If MD4 sums are easier/simpler i can use those instead, im lookin at a few hash app sources now, so i think i can see how to get the md5 but not the crc32 yet, or how to rename the 2 files and folder based of the text file.
View 6 Replies
Nov 3, 2011
I wrote an application that copies files from Folder(A) into Folder (B) First it checks if the files exists if yes it will copy them and it will over write the them in fodler (B) and is working great , but if I have a file in Folder(B)that is located in a subfolder the file inFolder (A) will not be copied to the new location.
belwo is the code to copy the files if they exist :[code..]
View 2 Replies
Jul 20, 2009
I need a script that will check files in a certain folder (lets call it folder1) against files in another folder (folder2), if there are any new files, or changed files it updates them in folder2.
View 2 Replies
May 13, 2009
I am using Visual Studio 2008 Setup project. I need to copy one folder and the sub folders into the program files but when I tried to copy or add the folder to "Application Folder" in File System editor, I am able to add only files and not folders.
View 1 Replies
Sep 27, 2011
how to change the install folder path in a setup and deployment project/Installer class from program files to C:usersPublic in windows 7 and allusers folder in xp.Want to add MVP with my name.
View 3 Replies
Apr 14, 2009
I have made this installation program and everything work just fine, but I wish to improve it a little. Atm. all the files being installed is in a seperate folder, and the installation program simply move them to the right location.There is a builder program too.I would like it to add all files from a list to the programs resource.folder instead of a seperate folder.Atm I add the installation file to the destination folder with the following line. [code]
View 2 Replies
Feb 6, 2010
Code so far:
Private Sub Button6_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button6.Click
If FolderBrowserDialog1.ShowDialog = Windows.Forms.DialogResult.OK Then
End If
End Sub
I have managed to get drag and drop working if this is any help:
Private Sub ListBox1_DragEnter(ByVal sender As Object, ByVal e As _
System.Windows.Forms.DragEventArgs) Handles ListBox1.DragEnter
If e.Data.GetDataPresent(DataFormats.FileDrop) Then
[code]....
View 3 Replies
Feb 3, 2012
I am wanting to get a complete file/folder listing and then copy these files to another folder.
Here is my
[Code]...
This happens on many folders. How can I get a listing of these folders and also copy these files?
View 2 Replies
Aug 23, 2010
So I've been using some code to generate directories and such in a custom treeview, but am looking to expand upon this idea. While it's not using recursive functions, and only calls functions when expanding levels, I'm not quite sure how to put some of these together.find a way to just search through all folders on the PC. If the folder contains audio files, that folder is than added to an array (searching a folder for audio files and adding that folder to an array is done). It's just recursivly searching all folders on the PC.Here is the code I've been using for the treeview (I'm not sure if it can be adapted):
Public Function ListAllDrives() As String()
Dim arDrives() As String
arDrives = Directory.GetLogicalDrives()[code].....
View 4 Replies
Nov 19, 2009
I need to count the numers of directories in a folder( by path ) How can i do that? should i just add something to this?:
Dim path As String = Application.StartupPath & "\Bin\"
Dim sf As String
For Each sf In Directory.GetDirectories(path)
Next
View 9 Replies
Jan 6, 2009
Basically I am trying to enable the user the ability to select a folder and the folders music files populate a list box. I want two list boxes on the page, one with all the contents of the folder and then the other one for files selected from the first box. I have no clue on how to do this at all...
View 4 Replies
May 6, 2010
Ok so i have a program that pulls up all the video files in a video folder. I need a code that will move one of the files in the listbox to a recycle bin i made. But i dont want to replace any of the files in the recycle bin i just want a code to move one file out of one folder and into another. So if there is a code for this then great.
View 2 Replies
Apr 22, 2009
Code the count all the images inside the folder regarlest of different format.
View 5 Replies
Nov 29, 2009
What I would want, is a way to get a count of how many sub-folders another folder consists of. For instance, if "c:TestAppTestFolder" contains the sub-folders "Videos", "Pictures and "Audio", I would somehow want to get the code to get the value '3' in this case.
View 4 Replies
Aug 18, 2011
I'm trying to copy multiple excel source files into one excel file. My current code is working only for 3 source files..If more than 3 files are there, it doesn't copy the data but creates blank work sheet in the output excel file. Lets say I have a source folder with 5 excel files. Each workbook contains one worksheet with data. It copies upto 3 worksheets along with data into output excel file.
Lets say excel1 contains A as work sheet, excel2 contains B as work sheet ,excel3 contains C as work sheet ,excel4 contains D as work sheet ,excel5 contains E as work sheet .Now my output excel file should look like..OutputExcel with A, B, C, D, E along with respective data.But my current code is giving output as A,B,C worksheets along with respective data but its creating blank sheet1,sheet2 in place of D & E.
SSIS Script Task Vb.Net Code:
Public
Sub Main()
Dim filePath
As
String =
[code].....
View 1 Replies
Apr 26, 2012
I need to know how could I move all files inside a folder (for example: C:Folder1) to another folder (for example: C:Folder2), but not delete Folder1 and get how many items have been moved, let me explain;
I need to move all items inside Folder1 (files, folders, sub-folders, sub-files, etc) maintaining directory structure, but without delete Folder1, and if its possible know how many folders and how many files have been moved (only the number of folders and number of files).
View 1 Replies
Apr 13, 2012
I have a folder that contains master copies of about 50 txt files.
Is there a way to open each of those text files and save them under the same name but in a new folder?[code]....
View 2 Replies
Aug 23, 2011
I am trying to import a bunch of excel 2003 files all with A:H columns and they are under the same headings etc. into a table in access 2003 database. This is a module in access im making. Im using a file search to look for every file that begins with Format (which they all do ) to get at all the files in the folder path. is there a more efficient way to do this? somehow select all files in a folder? and import each to the same table in access? The DoCmd.TransferSpreadsheet seeems to take each file path individually so I'm not sure how to get each file name in the folder to import it.
I have this at the moment:
Sub Import()
Dim db As Database
Set db = CurrentDb
[Code].....
View 1 Replies
May 22, 2012
Ok I know this question has been asked to death but I still have not seen a good answer. I have created an application in VS2010 using VB.NET. In my application I have an error log that is an XML file located in the Public gstLocalErrorLogLocation As String = Application.StartupPath & "ErrorLog"that gets written to in the event of an error so I can trouble shoot application easier. My application also downloads files from our FTP site and puts the files in Public gstLocalDownloadLocation As String = Application.StartupPath & "download"So I have files that get read and written to as well and created and deleted all in the Application.StartupPath which is either "c:Program Files(Application Directory)(Some Directory)(Some File)" or "c:Program Files (x86)(Application Directory)(Some Directory)(Some File)" depending on 32bit or 64bit Windows 7.
After creating the setup I install it on my test machine that have both Windows 7 32bit and 64bit.Everything in the application works great till I have to write to, delete or creat a file in those directories above. I know it is an access issue and the UAC. This will get installed on numerous systems so the options I have seen to change file or folder permission on the computers manually is not an option.What has to happen is after I install the application it just works like when you install it on XP. Some post have suggested that you us a user with administrator privilages or group which is all fine and dandy but the user I have used to test the application has all of that.
So what I am asking is how do you create an application with VS2010 in VB.NET that after creating a setup package and installing on Windows 7 will just work with out "Access to the path c:Program Files(Application Directory)(Some Directory)(Some File) is denied." If I have to install this on 100 Windows 7 computers it has to be a concreate no manually doing anything just install and work like when we installed on XP.
View 5 Replies
Dec 26, 2009
I am trying to retrieve file details from files in the Program Files folder. I receive an error while trying to retrieve file details.
Dim sFileName As String = ("%ProgramFiles%Windows DefenderMSASCui.exe")
Dim Info As FileVersionInfo
Info = FileVersionInfo.GetVersionInfo(sFileName)
Msgbox(Info.ProductName.ToString())
I receive file not found error at 3rd line. But if I change the path from "%ProgramFiles%Windows DefenderMSASCui.exe" to "c:Program FilesWindows DefenderMSASCui.exe" it works fine.
What should I do if I want to retrieve file details from the path which includes a "%" character?
View 2 Replies
Mar 29, 2009
im trying to split a folder of text files into several folders of no more then 12 files a piece, we have wedding photos 1-144 which would like to have um split into folders of 1-12,13-25 etc, found something that might work but it does it by files size
Code:
Imports System.IO
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[code]....
View 9 Replies
Apr 1, 2009
I need to scan either a drive are folder and search for .theme .VStyle and shellstyle.dll and there folder/subfolder names.The code scans for all .Theme files on the drive or in a folder, when it finds it it stores the folder name that file is in and also the name of the .theme .
View 4 Replies
Jun 9, 2011
How to list all files in a folder including subfolder files.
View 9 Replies
May 30, 2012
i am trying to get files name, modified date in a folder Before i get those files, can i pump a command by using vb to the folder and make them sort by modified date?
View 6 Replies
Feb 13, 2011
To improve performance, when one has many files to readwrite it is better to save them in smallergroup in different folders. Is there a magic number over which it is better to start splitting the folder? for example below "10.000" (invented number) files can be stored in one single folder, while above that it is better to start storing files in multiple folders.
View 16 Replies
Jan 18, 2011
I have developed a vb.net application which creates a csv file from database. When I run it from my system it works perfectly but when I copy the files from release folder to a folder on the server and runs the .exe file it give me IO Exception error. "The device is not readyť
[Code]...
View 2 Replies
