Verifying Files In A Folder Based On Line Count?
Jun 5, 2012
I'm trying to figure the best way to verify the contents of a folder based on another count via a listbox. Here is my current code to count the number of PDFs in two different locations and total them together for a grand total.
'counts test1 pdfs
Dim f As String, c As Long
[code]....
I have another process before this that will create the PDF's based on the files listed in the listbox.What I am having trouble with is verifying that the PDFs that are created in the Test1 and Test2 folders equal the counts from the listboxes. This count needs to match before running the next process. I'm kind looking for wait or loop until both counts match, again before running the next process.
View 2 Replies
ADVERTISEMENT
Oct 8, 2011
i am using VB 2008 EXPRESS EDITION. i want to know how to build a program that counts how many files in a folder and checks if the number of the files are increasing or not per specific time (lets say 1 second) . if files are increasing then its okay, if not. then the program assume that the MAIN PROGRAM RUINING is halted and it must be restarted.
[Code]...
View 1 Replies
Jan 26, 2012
How would I go about counting specfic files in a given folder?I have for instance these files; 6-11715.jpg ,6-11715_1.jpg, 6-11715_2.jpg, 6-11715_3.jpg, 6-11715_4.jpg, 6-11715_5.jpg, 6-11715_6.jpg.
I want to be able to show the first picture then using a next button load the second picture and so on. When I get to the last picture I will repeat the process.
I'm thinking I need to count the files first based on the left string of the name to get the total number. then based on the number I can pull the fill with the file name change accordingly.
View 5 Replies
Nov 16, 2011
I'm new to the Vb.net. To display the list of files in the given folder, need to processing the files one by one based on the user given the order/arrangement in form based interface.
How can do this in vb.net 2005 or any suggestion.?
View 1 Replies
Oct 28, 2008
I am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
View 5 Replies
Mar 4, 2010
in the current project im making i've decided to add in some tools, 1 of which is a renamer based of a renamer app that already exists (called scdtoolz), i want to build my own version of it so i can learn some new things, and build a nice GUI version of it.[code]So what i have managed to determine is that the current app scans the folders contents for the CRC32 Checksum, and renames based of that, since the 456.bin's CRC32 Checksum was 2274F80B, and in the text file 2274F80B is found here 'WWF - Rage in the Cage (T-81015)(U)#2274F80B#'So now i have determined game identification is based of the CRC32 checksums, how would i go about coding a similar ap in vb.net?first i need to make the app scan a folder, but how to return crcchecksum? and then rename if check = XXXX? If MD4 sums are easier/simpler i can use those instead, im lookin at a few hash app sources now, so i think i can see how to get the md5 but not the crc32 yet, or how to rename the 2 files and folder based of the text file.
View 6 Replies
Nov 3, 2011
I wrote an application that copies files from Folder(A) into Folder (B) First it checks if the files exists if yes it will copy them and it will over write the them in fodler (B) and is working great , but if I have a file in Folder(B)that is located in a subfolder the file inFolder (A) will not be copied to the new location.
belwo is the code to copy the files if they exist :[code..]
View 2 Replies
Oct 8, 2009
I have a fair bit of experience with VB.NET and C# (In this case I chose VB.NET, blame my laziness), but I do most of my professional work using PHP. I have no experience what so ever in using any database with VB.NET let alone MySQL.Just FYI, at the moment I am only trying to Query the database to gather the information required to activate. The Activation wizard and algorithm building (which is finished anyway), and everything else will come soon. I chose the MySQL database because I have experience with it, and it seems the best option for remote usage.The whole idea already works in PHP, I'm just have major issues moving it accross into VB.NET (Using the MySQL Connector.NET);I understand the basics, and all I need to know how to do is Count Rows and gain access to the other information in a row based on provoided information (in PHP, through mysql_ result)
So, here goes nothing, this is the Query code I am using in PHP to complete the job I want to do in VB.NET. [code] As you can see, I basically need to get the PHP code into VB.NET to fit into the 'btnQueryDB.Click' Command in VB.NET. By Equivalent, the Product ID in VB.NET will come from 'txtPID' and similar, Serial Number will come from txtSNUM. Once counted to be 1, the Activation Code and Status will be fed into 2 other text boxes in the form. (acCode, and acStatus).
View 3 Replies
Jul 20, 2009
I need a script that will check files in a certain folder (lets call it folder1) against files in another folder (folder2), if there are any new files, or changed files it updates them in folder2.
View 2 Replies
Nov 13, 2009
I've tried searching on this but can't seem to find an answer anywhere, so hopefully someone here can help. I want to insert an conditional XML tag based on whether or not a count is above one, but am not sure how to do it.For example, I have two XElements that are like this:
<Blob>
<Group>
Stuff 1
</Group>
</Blob>
[Code]...
But that is not working. Does anyone have a way to do this from within the XML Literal as desired above?
View 1 Replies
Jun 21, 2010
I have a form that needs to create textboxes based off the count of rows in my dataset table. The amount of rows could vary from 10 to 20, so I need a loop to add the textboxes to add the textboxes on load. Right now I have the loop down and other things shown below.[code]...
View 7 Replies
Sep 15, 2009
I have a SQL database which I'm running a query against to return a list of names - eg using "select names from table"I would like to add all of these names to an array so I can use them later. To do this I would need to use a dynamic array as the number of names returned could be anything.Apart from first running "select count(names) from table", getting a value and then Redim'ing the array on the count is there another method I can use.I've seen there's a dataset row.count? Can I somehow use this?
connection.Open()
reader = command.ExecuteReader()
While reader.Read()
[code]....
View 5 Replies
Jun 22, 2011
How to get word count from a word document based on the page
How to get text from a word document based on the page[code]...
View 1 Replies
May 11, 2009
I am trying to figure the best way to programmatically re-size table column headers in ReportViewer.Basically, my current resolution is the following: ColumnWidth = Header Caption_CharacterCount * 0.32...Where 0.32 is an estimated width of a typical character using my current font size.The issue is that the width leaves a lot of whitespace for longer captions.The more characters a caption has, the more whitespace I end up with.The issue with estimating this way is that not all characters are the same width. A good example would the the "I" character, which takes up less screen width than the rest of the alphabet.[code]
View 1 Replies
Feb 15, 2009
I have two multiline textboxes, and I want to compare and count the text differences between them. The algorithm appears very complex.. To be exact, I need to check for the spelling mistakes (spaces and newlines can be ignored..)
View 6 Replies
Apr 9, 2009
i saw jim example in the codebank and i added the percent progress parameter to report progress method (to change the progress bar value)this is jim example:-
vb.net
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, _
ByVal e As DoWorkEventArgs) Handles BackgroundWorker1.DoWork
[code]....
View 2 Replies
May 13, 2009
I am using Visual Studio 2008 Setup project. I need to copy one folder and the sub folders into the program files but when I tried to copy or add the folder to "Application Folder" in File System editor, I am able to add only files and not folders.
View 1 Replies
Mar 29, 2012
I am quite new in VB NET, after VB. and unfortuantely I had to copy paste and merge the code fragments from some tutorials.
I have a folder including 200 eng files which can be opened by notepad. And each file has around 4000 row; with 60 field seperated by coma. I need to read specific row-field value at each files.
Now what I can is:
a) reading individual txt files and find specific value
b) listing all of the files in the folder
c) I can merge (a) and (b) and read all the files automatically, but since ram is continuously increasing, and at one point (sometimes 163, sometimes 169, or 170. files or something) it gives an error as "System.OutOfMemoryException". My ram is 4 GB and when I get this error the ram is increasing to more than 3 GB.
1- Could it be happen because of being eng files instead of regular txt files?[code]...
View 1 Replies
Sep 27, 2011
how to change the install folder path in a setup and deployment project/Installer class from program files to C:usersPublic in windows 7 and allusers folder in xp.Want to add MVP with my name.
View 3 Replies
Apr 14, 2009
I have made this installation program and everything work just fine, but I wish to improve it a little. Atm. all the files being installed is in a seperate folder, and the installation program simply move them to the right location.There is a builder program too.I would like it to add all files from a list to the programs resource.folder instead of a seperate folder.Atm I add the installation file to the destination folder with the following line. [code]
View 2 Replies
Feb 6, 2010
Code so far:
Private Sub Button6_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button6.Click
If FolderBrowserDialog1.ShowDialog = Windows.Forms.DialogResult.OK Then
End If
End Sub
I have managed to get drag and drop working if this is any help:
Private Sub ListBox1_DragEnter(ByVal sender As Object, ByVal e As _
System.Windows.Forms.DragEventArgs) Handles ListBox1.DragEnter
If e.Data.GetDataPresent(DataFormats.FileDrop) Then
[code]....
View 3 Replies
Feb 3, 2012
I am wanting to get a complete file/folder listing and then copy these files to another folder.
Here is my
[Code]...
This happens on many folders. How can I get a listing of these folders and also copy these files?
View 2 Replies
Aug 23, 2010
So I've been using some code to generate directories and such in a custom treeview, but am looking to expand upon this idea. While it's not using recursive functions, and only calls functions when expanding levels, I'm not quite sure how to put some of these together.find a way to just search through all folders on the PC. If the folder contains audio files, that folder is than added to an array (searching a folder for audio files and adding that folder to an array is done). It's just recursivly searching all folders on the PC.Here is the code I've been using for the treeview (I'm not sure if it can be adapted):
Public Function ListAllDrives() As String()
Dim arDrives() As String
arDrives = Directory.GetLogicalDrives()[code].....
View 4 Replies
Nov 19, 2009
I need to count the numers of directories in a folder( by path ) How can i do that? should i just add something to this?:
Dim path As String = Application.StartupPath & "\Bin\"
Dim sf As String
For Each sf In Directory.GetDirectories(path)
Next
View 9 Replies
Jan 6, 2009
Basically I am trying to enable the user the ability to select a folder and the folders music files populate a list box. I want two list boxes on the page, one with all the contents of the folder and then the other one for files selected from the first box. I have no clue on how to do this at all...
View 4 Replies
May 6, 2010
Ok so i have a program that pulls up all the video files in a video folder. I need a code that will move one of the files in the listbox to a recycle bin i made. But i dont want to replace any of the files in the recycle bin i just want a code to move one file out of one folder and into another. So if there is a code for this then great.
View 2 Replies
Apr 22, 2009
Code the count all the images inside the folder regarlest of different format.
View 5 Replies
Nov 29, 2009
What I would want, is a way to get a count of how many sub-folders another folder consists of. For instance, if "c:TestAppTestFolder" contains the sub-folders "Videos", "Pictures and "Audio", I would somehow want to get the code to get the value '3' in this case.
View 4 Replies
Nov 13, 2009
I'm wondering is there a way to count the characters on a line like .length but with XML in VB. Take a look at my code and you'll probably understand exactly what im doing.Basically the formula is to count words by saying every 5 characters is a word. So I need to get the amount of characters in the line and divide by 5.[code]
View 3 Replies
Aug 18, 2011
I'm trying to copy multiple excel source files into one excel file. My current code is working only for 3 source files..If more than 3 files are there, it doesn't copy the data but creates blank work sheet in the output excel file. Lets say I have a source folder with 5 excel files. Each workbook contains one worksheet with data. It copies upto 3 worksheets along with data into output excel file.
Lets say excel1 contains A as work sheet, excel2 contains B as work sheet ,excel3 contains C as work sheet ,excel4 contains D as work sheet ,excel5 contains E as work sheet .Now my output excel file should look like..OutputExcel with A, B, C, D, E along with respective data.But my current code is giving output as A,B,C worksheets along with respective data but its creating blank sheet1,sheet2 in place of D & E.
SSIS Script Task Vb.Net Code:
Public
Sub Main()
Dim filePath
As
String =
[code].....
View 1 Replies
