I'm a noob to the .net world and I was wondering how I would go about creating a rich text box by triggering a click event button. I am trying to shrink the data currently in my form. One way of doing this would be to take away the two rich text boxes I have drag/dropped into the form and just adding a button. When the button is clicked, a rich text box will pop up.
View 1 Replies
everyone! I've been at this for a while, and I'm not sure how this issue can be resolved:I'm working on a project in VB.Net, and I have a form with a rich text box. I have a groupbox with 4 radio buttons inside that are intended to change the font color of the text. Coincidentally, I have to repeat this same functionality for a 2nd set of radio buttons that would change the text font family.
At any rate what I've only been able to do is the following to successfully change the font color of whatever text I highlight in the rich text box:
Private Sub rbtnBlack_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rbtnBlack.CheckedChanged
rtbxTextEditor.SelectionColor = Color.Black
End Sub
Private Sub rbtnRed_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rbtnRed.CheckedChanged
[Code]...
Is there a way that I could write a sub (I'm assuming I would use a sub, since I don't think I need to return anything, thus eliminating the use of a function) that would handle the action of changing the selected text color in the rich text box without having to use a separate sub for each radio button? Mind you, per my teacher's specs, she doesn't use a button handler for any of this.
I am developing a program that populates a rich text box and from a click event on a listbox. The data that is being loaded into the rich text box is located in a richtextformat file located on the hard drive. I noticed that when I entered a URL into one of the richtextformat files that it appeared that I was able to click on the text as if it were a link. So I wondered if it was possiable to click on that URL and open a web browser from the loaded richtextformat file? I have read several articles in regards to opening hyperlinks in rich text boxes which can open a web browser with a given URL.
View 1 RepliesHow can i make the Font Bold in a RTB using buttons?
View 2 RepliesI have a rich text box ('RichTextBox1') and a button ('BoldButton'), and have it set up so that whenever the user highlights some text in the box and clicks the bold button, that text becomes bold. That much I've figured out...
Public Class Form1
Private Sub BoldButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BoldButton.Click
Dim Bold As New Font(RichTextBox1.Font, FontStyle.Bold)
RichTextBox1.SelectionFont = Bold
End Sub
End Class
But I'd also like to add the ability that if the user highlights text that is already bolded, then clicks the bold button, that text will go back to 'regular' font. In other words, I'd like the 'bold' button to be able to toggle between bold and regular font.
I am unable to load rich text files into my rich text box. It worked fine yesterday, would there have been anything I could have changed by accident?
With OpenFileDialog
.Filter = "Text format (*.txt)|*.txt|Rich Text Format (*.rtf)|*.rtf|All files (*.*)|*.*"
[Code]...
but I am getting the error File format is not valid when i attempt to open any Rich Text file
1. Something similarly I want with another button - when I click button2, I want to remove specific object - let say panel2, not hide it.
2. The second thing is that I want to put text from my textbox into excel, but in specific row. I would like to do that with word file as well. I would like to put text form my textbox in specific table, or row, or line. I only know to put text into a file.
I have a rich text box which I use in order the user is able to add pictures, coloured writing, different font etc... however I need to load specific text in the rich text box when the user load the Form.how I can add (I guess) the HTML to load this every time the user load the form.
P.S the text will change depending on who loads the form so I can not do a simple
RichTextBox1.LoadFile("C:Documents and SettingsDesktopSigniture.rtf")
I want to create something like this in vb.net I have a Button called "btn1" on my Form called "frmMain".
In btn1_Click() event
'Check if btn2 exists
'If not then
'Code for Creating btn2 just below btn1
'End if
End Sub
[Code]...
I'm using winform and fb.net. Any example of how to create a buttons click event?
I have
dim but as windows.forms.button
but.name
but.text
but.location
etc.
but I how do I create the Click and the code behind it?
is it possible to create a MS ACCESS file with click of a button. (what if the client pc doesn't have MS Office install only ACCESS run time is installed.if yes what will be the code to create a file let say c:/1.accdb
View 1 RepliesI have an app that I have to submit a question to a site. How do I get the app to click on the submit button automatically?
HttpWebRequest
or do I need to use a scripting language to intergrate into the app?
i have one datasource customer-Details it consists of 10 items i bind them with a textboxes and set one primary key to the customer Name i want to create a one crystal report on one button click but the report should be of only one which is present in the textboxes eg i fill the CustomerDetails and save it and i want to show the report of only that content which i ve filled in the current form not the others or previous ones.
View 1 RepliesAs the image shows i am suposse to create a For loop to cause the display to show with the button click.
View 2 RepliesI am trying to create a button click event that changes a label and a picture like this.
Private
Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnalb.Click
lbl2.Text = "Montgomery"
PictureBox1.Image. ???
End Sub
There are 4 buttons and 4 pictures, and I added them in a project resource file (resources.resx).I'm not sure how to add the pictures from the picturebox index (?) to the picturebox when one of the buttons is clicked.
I have this problem but I already simplify the code as below:Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Label1.Text = "hello"
System.Threading.Thread.Sleep(5000)
'MessageBox.Show("hahahaha")
Label1.Text = "world"
End Sub
What I'm trying to achieve here is, after I click the button, the label1.text should change to hello, and after that to world. But I couldn't achieve that. Instead when I click the button, it just paused for 5 second and displayed world.System.Threading.Thread.Sleep(5000) The code is just a dummy for a loop that I have.
I need to click a radio button for Metric and have "mm" appear on my form beside a box where the user will enter numbers. I have 3 radio buttons, American "in", Metric "mm" and Decimal "dec". I want the "in" or "mm" or "dec" to appear as text on the form beside the boxes where the user will put in the numbers.
View 1 RepliesI have created a custom logonui.exe in VB.NET and I know how to make it replace the existing logonui.exe, but I am having trouble with the functions, such as shutdown, restart and log in. I don't need to get the list of users, because there is only one user account on the system and it is not password protected. I just need it to log in to the account when the user clicks a button and to be able to shutdown when the user clicks a different button.
View 15 RepliesI wanted to create a simple Visual Basic 2008 program that can log me into my email with a click of a button...what would a the code for the button look like?
View 1 Replieshere is the deal, imagine that i've a fullscreen form, and when clicking on a button, it will create a new control, a control that could be selected and moved. I know that they are dynamic controls, but anyone know how to make them with the specific things i've said? A kind of dynamic controls allowing drag & drop to another position.
View 39 RepliesI just finished reading Hour 3 in Sams Teach Yourself Visual Basic 2010 and I got a little stuck. url....Is the section I'm on, on exercise 1. I have the form set up with 1 button and 2 textboxes, but I'm not sure how I could make it so when you click the button it sends the text from the first text box to the second text box.
View 1 RepliesI have one combobox, two buttons (Add and View) and listbox. When I click button Add text from combobox is added to text file. This is code for Add button:
[Code]...
how to click a button that will always contains a certain text, but will always have a different number behind it?For Example:
"text" = Static "text2" = Dynamic
"texttext2" That is the button id.
I decide to use button to display AM/PM, when click on the button I want to change button text as AM to PM.
View 1 RepliesI have textbox "tb1" on my page and I want users to be able to add another if they need to input more data. I have the following [Code]. My problem is that I can only add one text box each time and I also have a search button for the right panel on the page and if this button is clicked the created textbox will disappear.
View 2 RepliesI want to have the browser to be directed to a certain url upon button click with the text inserted into the textbox place into the url. For example - [URL] No this isn't what I'm trying to do, but it gets the idea through.
View 1 RepliesI need to create a program that when I click a button it shows a sentence (took it from a list) random. But after it have to delete the sentence from the list 'cause we dont want to read it again I don't know so much about VB so I'd like some help!
View 25 RepliesI am new to vb 2008, but I know how to automate some html elements. The issuse that I running into is that I cannot get my webbrowser1 to auto-click the "Gmail" button at the top left of the page or the "Show me my account" button on the righthand side of the webpage. Here is the webpage that I'm trying to auto click: url...Can someone please view the html source and give a code sample to click either button so that the page can then go on to the following page?
View 7 Repliesim creating a high score table. Although i dont know how to write to a text file.What i did first was i created a text file in vb's resources and thats about it.What i want the program to do is:when a user clicks e.g. Button1. then the programs gets the score from textbox1.text (currentscore) and textbox2.text (out of)
then saves it to the text file.I tried the following
Dim oFile As System.IO.File
Dim oWrite As System.IO.StreamWriter
oWrite.WriteLine(TextBox2.Text(""))
EndClass
Is there a nice simple way I can validate that text box using an If statement to make sure it follows the rule [#][#]:[#][#] (The #'s are single numbers) and not allow anything but a ':' to separate the pairs?
View 1 Replies
