I am using vb2005 with ms access database.I have a datagridview to show the reports for users.One of my datagridview coloumn is to be allowed for change the string value. Currently editing is disabled.
I am using vb2005 with ms access database.I have a datagridview to show the reports for users.One of my datagridview coloumn is to be allowed for change the string value. Currently editing is disabled.Which is the best method to change the value of that particular cell and updating the same with database.
I have a WinForms DataGridView control on a form. There are two fields in this DataGridControl:
Email Address Resolved Email Address (calculated based on the input in Email Address)
After the user inputs or changes a value in Email Address, I want the value in Resolved Email Address to update based on a separate method. What event should I tie in to so that that the Resolved Email Address cell is updated after the Email Address cell is updated?I'm not sure where to put the event because the user could do a number of things after adding/changing a value: tab to the next cell, click cancel on the form, click ok on the form, etc.
I have a DataGridView bound to a DataTable that has 1+16 columns defined as Integer.The default cell style is hexadecimal 2 digits (.Format="X2").When entering in cell editing I would like to provide to the user, the possibility to write the value in decimal or hexdacimal.Hexadecimal could be written like, for example, 0x00, 0X01, x02, XFF Decimal like 0, 1, 2, 15For this reason in EditingControlShowing I add "0x" to the TextBox value
Private Sub BankGrid_EditingControlShowing(ByVal sender As Object, ByVal e As DataGridViewEditingControlShowingEventArgs) Dim grid As DataGridView = DirectCast(sender, DataGridView)
I am adding an undo feature for a DataGridView using the Command Design Pattern. To create the EditCommand, I have to know what was the previous value of the cell, so I can re-enter it in case the user hits undo. I'm doing it using the CellBeginEdit and CellEndEdit events. With the CellBeginEdit, I save the value of the cell in a private variable and at the CellEndEdit function, I use the saved value to create the EditCommand. It's working fine, but I wonder if there is a more saner way to do it. Maybe a event that holds together the previous and the new cell value. Bonus points if I could actually prevent the DataGridView from updating itself and let the EditCommand do it.
I am trying to trigger a tool tip when a user enters a cell in a DataGridView and starts editing it. The idea being that I want the user to know to hit the Return key after they are finished typing in a string in the cell. I only want the tool tip to show when the user is editing a cell in columindex 1.
The following below does note seem to be working. Private Sub dataGridView14_CellEnter(ByVal sender As Object, _ ByVal e As DataGridViewCellEventArgs) _ Handles DataGridView14.CellEnter 'Only care about columnIndex 1 If e.ColumnIndex = 1 Then [Code] .....
I am trying to display a custom control in a datagridview cell so that I can show nicely formatted information.
I am quite comfortable with the use of datagridview control accepting a list of objects as its datasource. I am also comfortable with populating the cell contents in the cellformatting event.
So I am planning to, instead of using a normal textbox control, button control and linkedtext control in datagridview cell, display my own custom control which is good one for displaying some custom data like, name, address, telephone, photo and others. It would be a nice improvement in my application.
I have a DataGridView and want to update the contents of the CurrentCell while the user is typing.e.g. In a cell of fractions I want the user to be able to enter .957 - As soon as the user types the . I want to programatically change it to 0. without the user being aware of the change.
I have a problem with Data Grid. I'm calling my function in dataGrid.cell_endEdit and it doesn't work exactly the way I want it to. If I'm editing a cell and click in menu (or press ctr +s which means Save cell in my program), cell_EndEdit is not running. I know it is correct, but what can i do to save my changes in these cases?
after editing my cell in the datagrid . i am sorting then i select the next record the selection was do to the 1 cell on the row .i don't know what is the problem
I have a datagridview and in the _CellValidating event I am checking a cell to make sure it is filled in. If it is not, I want to stop editing, display a msgbox, and highlight the particular cell. Here is my code :
If e.ColumnIndex = 2 Then If e.FormattedValue = "" Then If Me.dgvFish.IsCurrentCellDirty Then MsgBox("Sample Number is a required field.")
[code]....
For some reason, I can't get the cell's backcolor to be filled in.
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a form which contains a populated datagridview and I have a button that calls a second form in which I want to be able to add additional rows to the first form's rows.My form2 has about 10 text boxes which the user will use to add columns in a new row...How can I capture the 10 textbox's information and add a row with 10 columns to display the textbox's info?
i am working on datagridview vb.net 2005 i am trying to modify the data with datagridview control the problem is the data is virtually modified in datagridview but no Change happened in my sql server 2005 database
I have a DataGridView bound to an Access Database. I have also added a button to allow adding a new column. However, when i save the databound datagridview, the new column doesn't save. How can I fix this?
i use a button to execute the update command for editing the row of the sql table. The row is update when i click the button, but the datagridview is not show the update of that row automatically, so i want to know how to refresh the datagridview when the table is update by just clicking a button.Here is the code below i use for editing the row :
Private Sub editbtn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles editbtn.Click If serialnotxt.Text = "" Then MsgBox("please enter the enter serial no and click search")
I'm trying to add functionality to my DGV that enables the user to edit the cell data and then save it to the datasource but I'm not getting very far. Right now, I'm just concerned with the editing the DGV part.
What's the best way to do this taking into consideration: A column of type date in hh:mm format will not edit. At the moment this column won't display the new edit and if I attempt to enter and display a string instead of a hh:mm rime format, I get an error)I need to provide validation for the value that is entered.There are loads of events for DGV cells
I want to only allow editing of one column in my DataGridView, but I want to allow the user to double click on any item in the row, and when the CellBeginEdit fires, force editing of my colum. I started by doing this:
Private Sub dgvCaptions_CellBeginEdit(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellCancelEventArgs) Handles dgvCaptions.CellBeginEdit If e.ColumnIndex <> COL_CAPTION Then[code].....
But this throws an error in the BeginEdit(False) line because 'Operation is not valid because it results in a reentrant call to the BeginEdit function.' which of course it will do, but that is what I want. Is there another way to do this?
I have a problem with the database and the DataGridView. After editing the attributes of the database you can not see changes in the DataGridView. If you connect the DataGridView through code connection is correct. What could be the reason? What could be the fault of pliu nmd_piDataSet?
(When I plug the same database under a different name everything works as it should.) I have a table with about 20 columns and I can easily edit szeroość, view columns, using the code is problematic and not so intuitive. [Code]
I have a Windows Form VS2010 .NET 4 project with a standard DataGridView bound to a datasource on a form.
The grid has a text column that I want to be a point and edit at the character clicked to. Like normal textbox/editors when you click on the character you want to adjust. If possible I would also like to use the UP/DOWN keys to move between rows but would like the cursor to move to the same character position obviously in the same column without selecting the entire text.
The BeginEdit just puts the cursor at the end of the text, which means another click to point to the character position for editing.
I know a Commercial grid like DevExpress defaults to editing in which you can click to the correct character position with one click but obviously costs money.
I have tried in the DataGridView1_EditingControlShowing event
If TypeOf e.Control Is System.Windows.Forms.DataGridViewTextBoxEditingControl Then Dim tb As TextBox = e.Control tb.SelectionStart = 5
[Code]....
I am just trying to remove the two or three clicks to get to the character position that needs adjustment.
I'm having problems editing the text of a particular column in a datagridview from the front end. The text enters ok but as soon as the cell loses focus it goes back to the old value. The datagrid view readonly property is set to false and I don't have any problem writing to the other columns.