How to setup a datagridview to display data based on a combobox value, then query the data on that value to display the results in a datagridview. This is what i have so far but i'm sure the is a better way of doing it. the current code doesn't work. [code]...
View 1 Repliesi'm got this sql query code in dataset designer
SELECT pkt.fldPackageID, pkt.fldPSID, pkt.fldQuantity, pkt.fldQuantityUsed, pkt.fldRetail, pkt.fldPK, ps.fldName
FROM tblPaketRow AS pkt INNER JOIN
tblProdukDanService AS ps ON ps.fldID = pkt.fldPSID
WHERE (pkt.fldPSID = @param)
I'm trying to display the results in datagridview,i drag from the data source in vs 2008..I can't figure out to do that.I use this code to set the @param on form_load event.
Me.TblPaketRowTableAdapter.JoinTable(SalonDataSet.tblPaketRow, modCommon.s)
Note: Combobox contains company name, then when i select one of the company in the list, the information on the table connected to to the company table like purchase order table info will appear on the datagridview.
View 2 RepliesI have two comboboxes. The data sorce of combobox1 is a list of string that is fixed.Combobox2's data sorce will be a list of string that depends on the selection of combobox1. This is very similar to a common case as follows: first enter your contry, then depending on your enter, the second combobox will show you the list of universities in the country.
'Change selection of first combobox
Private Sub cbxClient_SelectedIndexChanged(sender As Object, e As EventArgs) Handles cbxClient.SelectedIndexChanged
[code]....
I'm currently coding an ATM system in VB, and when a user picks a card to 'log on' with, they have 3 attempts to log on before the card is confiscated.
The card numbers are in a combobox (which are retreived from an SQL database using the binding source which is linked to a data adapter), and each card has a boolean 'confiscated' field in the database.
It does actually set the card to confiscated after the 3 tries, however I'd like the form to 'refresh' so the card no longer appears in the combobox, without having to close down the form and reload it. Is there a way to do this? I've tried refreshing the combobox and data adapter (.Refresh) but this does nothing
i have a query as i am using a data griid view which has 7 colums one off these colums is a combobox"item"
for the list of items in this combobox i want to pick from a database table
I'm working on a VB Winform project using Visual Studio 2008. The form's controls are all bound to a bindng source and a binding navigator which are tied to a dataset class. When the form is displayed, the first record is displayed as well. However, one of the controls (Radio button) is not showing the correct data from the data set. However, if I navigate to the next record and move back to the first, the radio button properly displays the correct information, so it appears the binding source is working the way it is suppose to.
[Code]...
How to Set Display Text Of ComboBox In Datagridview to for example :"Select combobox"
Set Text In Combo Box Is Simple but Set Text To Datagridviewcombobox is not like combobox
Any One Who Found Useful Link, because i didnt find any link related to my problem
EDITED:
I mean,i want to show a text in combo box before user click on it
Why when I drag the datagridview in my designer, they don't give me a selection on which data source?
View 13 RepliesI just want to display data in a DataGridView (from SQL - already made the connection) based on what is selected in a ComboBox (data that is also coming from SQL). The 2 are separete on the form. I am using VB 2010.
This doesn't work for me:
objCommand2.CommandText = "SELECT ProductID, Name, Color, Size, ListPrice FROM SalesLT.Product WHERE ProductCategoryID = " & cbCategory.SelectedValue
[code].....
I am using vb.net 2010 and winforms and DataGridView. The DataGridView has a DataGridViewComboBox column. When I show the form with the DGV it shows this and empty grid but the column that contains the ComboBox shows the first item on the dropdown list. How can I have the ComboBox display nothing until it is clicked on and selected?
View 1 RepliesI am trying to display a record in my datagridview based on the value selected from a combobox. I tried the code below using SQL Management studio and it works perfectly.
[Code]....
How to display all the data in username in to the combobox?[code]...
View 9 RepliesI need to use comboBox to store the months then when i select a particular month. I need to display out the data onto a gridview for that selected month.
View 1 Replies1. I have a DataGridView box, that is connected to a MySQL database via the 'Data Source'. I am trying to do the datagridview1.rows.add("info here"), however i receive an error i cannot do this programmatically. I DO know the code to post to MySQL via the "insert into" la la la.However, I was curious if I can do this via the datagridview a bit..easier/simpler, such as a "datagridview1.rows.add(stuff)" sorta thing.
2. I am attempting to make a custom control, and as with ANY control, they have their.. settings. Example, a textbox, or label, has so you can set the Text. and color, etc.Others, have it (such as datagridview) have the little icon on the control itself, where you click it, and it opens a small window with settings.
Can I display two fields of a data in a combo box. E.g. when I have to select a customer, its name and city should be shown.... Like...
M/s Ananad Traders, Mumbai
M/s Anand Traders, Kolkata and so on.
I did populate data from db into the combo box and display it into the text field .
Below is my code :
Imports System.Data.SqlClient
Public Class MPEJobEntry
'declaration of connection string
[code]....
Is there a way to update source combobox to printer combobox selection?So going from printer1 to printer2 the source will update according to what that printer has to offer.
View 8 RepliesIn vb.net using Data Reader while selecting an value in combobox should display an selected value record from the database into textbox.
View 4 RepliesAfter display list of data in combo box, next I would like to choose the data from the combo box and display all the information from the chosen data to texboxes , the data from combo box was link from my database (ms access).
View 3 RepliesI just inserted data into my sql database. Actually, I want to retrieve it automaticallyinto
View 1 RepliesI have a problem searching my record using a Combobox to display the data in a textbox or lablelbox
Eg;
txtUsername.text = rs!username
lblAddress.text = rs!Address
I have a CombBox and a data grid view on a form, when the form loads, the data grid view is loaded with data from the database. I want to filter that data with a selection from the combobox (which is loaded with data from another database). The code i have is as follows:
ContactsBindingSource.Filter = "Company Like '%" & Me.cmbSelectCompany.Text & "%'"but when I select an option from the drop down list the DGV gets cleared down as if my selection has no equivilant data in teh DGV.
I have a CombBox and a data grid view on a form, when the form loads, the data grid view is loaded with data from the database. I want to filter that data with a selection from the combobox (which is loaded with data from another database). The code i have is as follows: ContactsBindingSource.Filter = "Company Like '%" & Me.cmbSelectCompany.Text & "%'" but when I select an option from the drop down list the DGV gets cleared down as if my selection has no equivilant data in teh DGV.
View 1 RepliesI use following codes to diplay data in combobox
str = "SELECT sno,name,city FROM employees"
cmd = New SqlClient.SqlCommand(str, con)
[CODE]..............
With ComboBox1
.DataSource = dt
[CODE].......
Table has three fields as sno,name,city Combobox displays name column and data in table is as
sno--name-----city
1-------a------london
2-------b------moscow
3-------c-------tehran
Supose combobox text=a then I want to display following corresponding data in textbox1 and textbox2
textbox1.text=1
textbox2.text=london
(the first row of data)
I refreshed my data sources to include additional items from the SQL Server databases and it appears that my entire data source from my VB.NET project disappeared.I am using Entity Framework. I may have clicked on something wrong, not quite sure. Unfortunately I can't recreate the Data Source without creating a new Entity and Data Model.I can delete the entry in the App.Config file and recreated it, however things aren't quite right.Is there a way that I can recreate my Data Source from the entry that is in my App.Config file...since that appears to have remained intact.BTW, I can go to my Data Model and successfully refresh from there, however my project isn't connecting to the database so I have quite a number of errors until I can get reconnected.
View 4 RepliesI have several combo boxes that have a single Dataset and separate Table Adapter and Binding Sources to fill them.One combo box I have lists the Hispanic Origin of the client.The Data Source is bsCSpopup_HispOrg, the Table adapter name is taCSpopup_HispOrg.Below is the Table Adapter query if you can call it that and selects only the codes I want to fill the combo box
SELECT fcpopkey, fcpoptext, fcpopval
FROM cspopup
WHERE (fcpopkey = 'hispanic.origin')
[code]....
I am doing just fine loading the dispay text when the form loads, and saving the data to the client table, but, when I load the clients values, how do I cross reference the Source data value e.g. 1 to display the text "Not Hispanic" from the cspopup table.
I need to do in other platforms but seem to be having some issues with VB .net 2008.I have a datagridview bound to an SQL table that has several comboboxes.the rowSource (is it called that still?) for each of the comboBoxes are SQL lookup tables that I've created and based on the the users selection in ComboBox1, comboBox2's datasource may change.What I want is, if the user picks "Dental" from ComboBox1, I want comboBox2 to load Dental plans (Which I have working, no problem here I think).And if they pick "medical" in ComboBox1, comboBox2 loads medical plans in comboBox2 dropDown list, which, again that part seems to be working.If in the first row in the DGV,the user selects "Dental" for comboBox1 and then a Dental plan in ComboBox2,on the next row, if the user inputs "Medical" in ComboBox1, the first rows ComboBox2's "Dental plan" info disappears.
The medical plan can still be selected and displayed in row 2's comboBox2 (so the changing of the datasource is working)If you then click anywhere in the first row, ComboBox2's dental plan appears again but Row2's combobox2 now no longer displays the medical plan.Becuase whatever value you choose, no matter if it's a medical or dental plan, the info gets saved in the DGV bound table, shouldn't it display the saved information from the DGV's source and not the shifting comboBoxes datasources?
I have on my form a combobox, a datetimepicker, a button and a unbound datagridview. The datagrigview is fild with data like a yearcalender.So i have in first column all dates of januari, then a blanc column, then the dates of februari, then a blanc column and so on...This is wat the user will do :
select his name from the combobox, select a date from the datetimepicker and press the button.What i would like to happen then is this : Find in the datagridview the same date as the selected one and then place the selected name in the blanc cell next to that date.
Saving Data from Combobox in datagridview in Vb.net
View 2 Replies