Design Dataset Using Designers And Have The Table Adapter?
Nov 7, 2010i have create a new dataset to pull data from my Access database. May I know how do you call them to use it?
View 2 Repliesi have create a new dataset to pull data from my Access database. May I know how do you call them to use it?
View 2 RepliesI have some code in my ApplicationEvent.vb to handle The problem is that I need to execute a procedure that has a dataset table adapter in it.Obviously as I want it to run in batch mode I can't have a table adapter as they are GUI based (or at least I think they are) so I am getting this error:
'V_SyncStatusTableAdapter' is not a member of 'AppName.My.MyApplication'
For this code:
If Me.V_SyncStatusTableAdapter.GetData.Rows.Count > 0 Then
[code].....
In a DataSetIf I right-click on a TablesetAdd QueryCreate New Stored Procedure. The creation will fail for me using a SQL 2008 database. "There was a Problem with the UPDATE stored procedure. The stored procedure was not created."If I "Preview the SQL Script..." copy it and run it manually it fails because it is not putting brackets around my user name. "CREATE PROCEDURE SDSDBLUESKY.UpdateQuery" Fails"CREATE PROCEDURE [SDSDBLUESKY].UpdateQuery" WorksThis is a work around because it links to this if I do manually when it gives me the preview option, and don't rewrite it. But is there some setting change in VS2005 to get this to work correctly in the first place?
View 1 Repliesi created a type dataset. added two table adapters and made relationship on the key. now i want to show the datagridview with master/detail. how i can do it?
View 5 RepliesI created a new query in the dataset designer. There are now 2 queries there. The original one and the new one.I also added named parameters in the Where clause of the 2nd query.This is the query in the new one:
SELECT ID, FatherName, MotherName, EmergencyContactName,
EmergencyContactRelationship, Address1, Address2, City, State, Zip,
PrimaryPhone, SecondaryPhone, Emaile.
[code].....
Can you please explain me and/or show some good tutorials how to do it?It seems pretty complicated because visual studio usually does it all for you and that made me stupid and not to do anything about it.Things I don't know to do in code but I know VS does it for me:
[Code]...
I'm sure there is a good tutorial somewhere on the internet. I'm okay with doing it with designer, but now when I have a situation where I can't use MDI container but tabcontrol.Other solution would be to make a MDI container out of tabcontrol. Is it posible or only other form can be MDI container.
I have some concern about designing Datasets. I was told that it would be good to have a dataset for each table for maintenance purpose. Because frequent change in database tables is expected, having one dataset including every tables would be pain to make the corresponding change in the application.
Q. is it good approach to have a dataset for each table ( I would end up having 30~40 datasets for each db table using Stored procedure) ?
I have a separate project for commonly used datasets. each project include "dataset project" as a reference, and use it by including needed dataset into Forms, classes, etc.
Q. Does this approach makes the whole system to be slower? If I have a set of datasets as a separate project, it would be beneficial, since It will be easier to make a change (I only need to make modification in one place)
I have a data table whose one column is related to a column of another table. I have a listbox in a form which shows a column (which is sorted by another column value by ORDER clause) of the parent table and other columns are in textboxes. The child table is represented by a datagrid. When I add a new item in parent table and click save, the newly created item is listed at the bottom of the listbox violating my ORDER clause. When I wrote some codes to fill data again after updating, it shows an error message[code]...
View 3 RepliesI have this code to edit the datarow of my table adapter but t doesnt update the table. I think i have a missing code that's why but i cant figured it out. by the way im using vb2008 and SQL as my database. [code]
View 3 RepliesI added a table to my Access database. I added that table to my dataset. Using Database Designer VB Studio, my table and tableadapter show up in the design view. The class definition is in the datasetdesigner.vb, and it shows in the object browser. But, I can't reference it in code. I am a newby and obviously missing somethning.
View 1 RepliesI use a dbDataAdapter to populate a DataTable from an unlinked oracle database.I have a dbDataAdapter that I want to insert rows into an SQL Server table using SQLCommandBuilder.I have been trying all day to update the DataTable that references the SQL Server table with the data from the Oracle DataTable so that I can insert the rows.
View 2 RepliesI have a form that fills a table adapter with this:
Me.Scratchpad3TableAdapter.Fill(Me.MDRDataSet.scra tchpad3
and what I'd like to do is when users edit something on this form that they post the changes to a table called exceptionsedit which is not part of that dataset. What I don't know how to do is to how to insert those edits to the exceptionsedit table.
[code]when I run my program and press this button Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles exceptionsButton.Click..I have my date range within a time that I know that my dataset should produce a result, but when I put a line break in my code here: adapter.Fill(ds)and look at it in debug, I show a table value of 0. If I run the same query that I have to produce these results in sql analyser, I see 1 result. Can someone see why my query on my form produces a different result than the sql analyser does? [code]I can also verify that the variables are passing the correct values. Can anyone please assist as to why this isnt working?
View 1 RepliesI have the following
Imports System.Data.SqlClient
Public Class Main
Protected WithEvents DataGridView1 As DataGridView
[Code]......
I have the following code:
Code:
Imports System.Data.SqlClient
Public Class Main[code]....
and when I run my program, I have my date range within a time that I know that my dataset should produce a result, but when I put a line break in my code here:
Code:
adapter.Fill(ds)
and look at it in debug, I show a table value of 0. If I run the same query that I have to produce these results in sql analyser, I see 1 result. Can someone see why my query on my form produces a different result than the sql analyser does? Also here is my schema for my two tables:
Exceptions
employeenumbervarcharno 50 yesnonoSQL_Latin1_General_CP1_CI_AS
exceptiondatedatetime no8 yes(n/a)(n/a)NULL[code]......
I have been a systems admin for some time and my new employers are forcing my hand into programming. I am currently Trying to write custom software that interfaces with our Advantage Database. I have the data source and connection opening fine. It seems that All of the advantage developer classes are working correctly. Here is a link for adv advantage classes: [URL]..The problem I have is I want to query advantage... then place that query in a data set.., then display the results in datagridview on a form (just trying to see how the tools work) it seems that everything works without errors except I am getting nothing on my datagridview (stays blank after execution.
[Code]...
below is my code:
myCommand = New SqlCommand("SELECT VisitorID, VisitorName, Skill FROM tblVisitor LEFT JOIN tblSkill ON tblVisitor.SkillID = tblSkill.SkillID", myConnection)
myAdapter = New SqlDataAdapter(myCommand)[code]....
then it catch an error as Incorrect Syntax near". which it points to myAdapter.Fill(myDataSet, "tblVisitor") not the Select command.
in my project i have inserted a dataset and created a table using design view with columns "id", "name" and "add" and used this table in my crystal report.
Now what i want.I want to send details from text box to dataset so that when my report is generated it will show those data. i am familiar with saving data in normal database table Access or sqlserver. but i dont now how to save in dataset.me the code to save data in dataset from textbox as well as if i want to save from datagridview.
To get an id value after a table insert into an Access database you do a SELECT @@IDENTITY. I would like to know if this will work if your INSERT query is a table adapter query? I created an INSERT query for a table in the dataset designer which is working. My concern is that if I make another query with SELECT @@IDENTITY it won't work because table adapters make a new connection each time. Can someone clear me up on this?
View 5 RepliesI have a table adapter that I use just to fill a form when it loads. I've added two new columns in the backend and went in through the "DataSources" and added them. They appaear in the XSD designer but for some reason are not filling the form when it loads. I the form is writting to the backend correctly via hand coded SQL.
View 5 RepliesI have a dataset setup by using the Visual Studio wizard and in the form is this line of code:
Me.StudentsTableAdapter.Fill(Me.StudentsDataSet.Students)
The select statement for the table adapter is[code]...
Can you tell me how to add a Where clause using coding on this table adapter?
I have code in vb.net that was created using Visual Studio 2008. It has got queries done via data sets and table adapters. dsStagMyfileDesigner.vb and dsStagMyfile.xsd are the files having all the sql queries. They are code generated by using data table adapters I believe. Editing them might screw the system.
[Code]...
I'm currently trying to create a system which stores different cases for clients using Visual Studio 2010.When adding fields from the database a table adapter is automatically created.Me.TblMattersTableAdapter.Fill(Me.MJPAccessDataSet.tblMatters)Now my problem is that each case may be at a different stage. They are either 'Active', 'Closed' or 'Archived'.So my question, is there a way to filter these results? I've tried creating DataTable and only adding the archived cases but I couldn't get it to work. I was trying.
View 4 RepliesI'm using VS 2010 SP1 and Oracle 11g with Oracle tools for VS 2010. Previously I had tableadapters that queried the db with a where clause on a number column or date column as described below[code]...
View 7 RepliesMe.AtollTableAdapter.FillByAtollSearch(MSF_Defence_ForceDataSet.atoll)
AtollDataGridView.Refresh()
I'm using table adapter by wizard connection. and i used a query above (select atoll_no, atoll_name from atoll where atoll_no = +''like'%"&textbox.text&"') like that. And the query name is FillbyAtollSearch. I have try it many ways. but i could not search by letters.
I'm writing in textbox1_textchange event
ve 2 forms form1 & form2.form1 has primary key(parent table) & form2 has the foreign key(child table) me.mytableadapter.update(me.dataset.mytable)is working f9 but in form2 when i try to use me.secondTableadapter.updatehere problem comes the update function is not coming neither recognized by form2 .can anybody tell me why is it ?
View 1 RepliesHow do you restore a dataset to the previous state before updating the database with a data adapter? I have a concurrency update problem that I believe to be caused by this. The update fails during the update and a rollback command is issued using a SQLTransaction object. However, now the rowstates of the rows that did not have errors have been changed to unchanged. So this record is no longer availible to be inserted into the database. When I updated the value that could not be null and then test the second update which runs just as the first does then I get a concurrency error. The update code is below:
[Code]...
I've made a dataset using the dataset designer, and I'm trying to add a column to reflect changes made to the database (added a column, nothing fancy). Is there a way to 'refresh' the dataset schema from the datasource without deleting my adapter (and all the methods and queries I've created)?
View 2 RepliesI currentt have three tables, using a table adapters and datagridviews I would like to add a new record to each table. the only problem is that the primary key from table 1 is a foreign key in table 2 and 3. Is there a way to add a new record in the table adapter without sending it to the DB and get a predicted primary key so I could put this as the foreign key in tables 2 and 3.
View 8 RepliesI am using VB 2008 and Access Database.
Also using Typed DataSet.
My Question is how do i add Where Clause to TableAdapter at Run Time
I want to allow User to select Fields tobe filtered and values they should have.
For this my Select query is common but no. of records it will show will depend on User selected criteria.