I'm trying to display the total extraction progress of a zip file as below. This gives me the total file size of all uncompressed files in the zip:
For Each backup In zip
TotalSize = backup.UncompressedSize + TotalSize
Next
I'm then using this to get the current bytes transfered:
TranferTotal = e.BytesTransferred + TranferTotal
The problem is this value resets after each file is extracted from the zip. I was expecting the above to "tally up" the total so I could use it for the progress bar but it seems to still reset after each item? Also, I'm using a global varible for the transfer total, if there a better method to transfer this information to the StepEntryProgress? The reason I'm doing this is because the DotNetZip Library does not support multiple extraction in this way, so I need to tally up in this way.
Code:
Imports Ionic.Zip
Imports System.Threading
Imports System.ComponentModel
Public Class Form1
Dim TotalSize = 0
[Code] .....
a. Level 1 - $10.00 b. Level 2 - $12.00 c. Level 3 - $14.00 d. Level 4 - $16.00 e. Benefit Deduction Rate - 0.10 f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
I'm done using a data validation....using Litre and Price By putting a Litre and Price and save to database access...and now with my Progress bar i want to read what i want to put into a Litre to show on what is the value..By putting a Litre , I want to know how many gas left by using a progress bar.
im making a web browser which is intertwind in a project, but i cant get the progress bar to display the current percent of a page that is loaded, i want to have 10 segments, each standing for 10% of the total page loaded. So say a page is loaded 67%, 6 out of 10 of the segments will be shown.
I have created a little backup script to backup users files, and incorporated a little progress bar.The backup script backs up 5 main directory's on the users PC.Is it possible to have the status bar display total time for each individual directory? instead of each folder within a directory? [code]
I'm trying to display the progress in a progress bar, my app reads a csv file before it processes it to a database.and to set the maximum property of the Progress bar i need to detect the number of lines is there a way that im not aware of other than looping the file ?
I'm having some major issues with this little booger. I will supply what I've tried, but let me explain what it should do first.
Upon the text change event, if the item number is found in the DB, it should add it to the list. Then, take the 7th sub item, and place it on a label. Each time a new item is added, the cost's should add together to give me a total. Simple enough right ?
CODE:
This is a huge mess, I'm very tired and not real sure how to do it. But the item is adding twice for some reason, sometimes after I've added it one time (appears twice) and add it again, it might add 4 times, or 5. And when two items are in there, the cost displayed on lblPrice is 4x as much as it should be. Can anyone point out where I'm all screwed up, and maybe suggest a different way to go about it ?
This should calculate and display the total amount due. There are 3 radio buttons, A, B, C. Nonprofit should get a 20% discount from final charges.
Public Class Form1 Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load End Sub Private Sub RadioButton1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles radA.CheckedChanged [Code] .....
What i have in a text box that is the discount. The text box talks to the label as you type and updates it accordingly The problem is that once the discount_rate.text get to 10 or above the discount is off by 5 cents and increases as the number goes up..
Private Sub discount_rate_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles discount_rate.TextChanged Select Case radio Case "one" If discount_rate.Text = "" Then
In my form I have Gross Earnings Calculated. Then that goes to a label. I then click a button to Clear Current Employee. Then I can input another employees info to get that employees Gross Earnings. Well when I click View Summary I want to display a Total Gross Earnings. The Total Gross Earnings should be a Total of all Employees Gross Earnings.
my question is regarding a calculation and control display that I am doing.
The application is a project tracker, and I am trying to calculate the total spend of the project and display it on either the first tab if it is an open project or the second tab if it is a completed project. For some reason, it is showing 0 for all but one of the projects. If anyones eyes can see the problem I would be really greatful. The code is below
i have a list of 5 names and 5 amounts contributed saved on a text file called:
"G:mailinglist.txt"
Iv created a button and a textbox beside it. Basically i just want to be able to select the button and the values from the text file are added to display a grand total into the textbox.
The values are:
34 70 20 12.50 9 20
I would also like to have the text box display the grand total in Pounds (�) but again i do not know how to.
Ive got a Listbox which displays a data/record from a SQL database, it displays "Amount" and only numbers would appear. it has a datasource.
Goal: I'd Like to get the total sum of those numbers from the Listbox and Display it to a textbox automatically or by button click event.
I thought of two ways to do this, but I don't have a clue on what to do.
1. I tried summing it all up on that exact Listbox and display the total on the textbox, here's the code that i came up with..
[CODE]...........
But the data im working with is from a database, so i got this error:Conversion from type 'DataRowView' to type 'Double' is not valid.
2. I thought of having another Listbox and "Copy" the contents shown on the Listbox1 and then sum it all up on the Listbox2, then lastly display the Total on the Textbox. I did a little research on how to accomplish that but all the clue i found is that i have to disconnect the listbox data from the datasource from being bound, and reconnect it again.. I really don't have any idea on how i could do that with an SQL database.
Here's a quick flow on what im trying to accomplish to make things.
Record from Database -----Displays on---> Listbox1 -----User Clicks--> Button1 ----Displays Total sum on----> Textbox1
I have a text box in form1 that displays the total, I want to carry this over to form 2 into another text box as I navigate between them, how would I do this? Also I have a button on form2 to return to form1 but I need all the data that has been input by the end user to be cleared from both forms when returning, again how would this be completed?
I've added a button to my windows form and I want to have it where every time I click on that button it registers the click and displays the total number clicks in a textbox on the form.
How do I code the total cost to give me a pound sign with the total cost at the moment when the total comes up for an example it gives me 3.6 when I need it to show £3.60 here is the code I have so far. [code]
i need some help here, i want a result that shown a total number from student who passed some subjects. Let say there are 8 student who got A in subject chemistry, then the output should display result something like " there are 8 students who got A in chemistry". And also is it possible to combined the result, for example i want the output something like "there are "X" students who got A in chemistry and physics". where "X" is variable (number). it should trigger when winform is loaded. im using bindingsource.filter, but failed. because using bindingsource.filter need the input from user then it produce the output. whereas i want the result shown when the winform is loaded. How can i achieve this.
How can I get the sum all the values a user enters into TextBox1 to display that sum into TextBox2.The user is going to enter one value one by one. The user enters '1' into TextBox1, therefore, TextBox2 should display '1'.If the user than enters '2' into TextBox1, TextBox2 should display '3'.If the user enters '2' into TextBox1, TextBox2 should display '5'.And so on.TextBox2 should only display one value at a time, not one after another.I am using double because I need decimal places.I have a ListBox1 where it displays all the values entered by the user in rows one by one, but I prefer not to use the ListBox1 to get the sum of all the values entered in TextBox1 and to have TextBox2 show that sum. Because in that ListBox1, I have few other things in there, like Strings, which will not allow the sum of all the values entered in TextBox1 to be calculated and displayed in TextBox2.Not sure if this matters or not, but I thought it might.So only need TextBox2 to have all the values entered in TextBox1.If 1 was entered in TextBox1, TextBox2 shows 1.Then 2 is entered in TextBox1, TextBox2 will show 3.
I have a table from a database and i need to display the total number of record and display it in a label.i already have binding navigator but i will not use to display the total number of record in that table. and i will also make that binding navigator invisible.
I am doing in my Visual Basic Reloaded:second edition school book. Ok here is all the information the case problem gives me and what it wants me to do.JM Sales employs 10 salespeople. The sales made by the salespeople during the months of January,February, and March are shown in Figure 8.52. The sales manager wants an application that allows him to enter the current bonus rate. The application should display each salesperson's number (1 through 10), total sales ammount, and total bonus ammount. It also should display the total bonus paid to all salespeople. Be sure to use one or more array in the application.Then it gives you a table with the salespersons 1-10 sales amount january February and March.(this is the figure 8.52)Here is a duplicate table of it below.
Salesperson January February March ----------- ------- -------- ------- 1 2400 3500 2000 2 1500 7000 1000 3 600 450 21
I am trying to create a textbox that will display the total duration of all video files in a listbox. I am not using the windows media player in the project, I just want to show total duration of the listbox items. I have tried looking for snippets because I'm new to programming and I have also tried my luck at creating a class with no success. If anyone could show me some sample code or tell me what it will take to accomplish my goal it would be greatly apperciated. I am coding with Visual Basic 2010 express.
I have a login form through through which the user will login into my application. i have a server whos services are made in WCF. i am using the services on the server to authenticates the user. i have to display a server progress time at the client end.how is this possible??
I am writing my first app in VBEE and require your expert assistance.Once a button is clicked in my app, a number of queries in Access 2007 are run. I would like to display the progress of these queries and send text to a text box informing the user of the progress, i.e.[code]I have entered the Text I want to display but it does not update it as it progresses through the code, instead it updates all of the text at the end, once all of the queries have been run.I would also like a progress bar to display the progress of the queries [code]
This is my project for class and this is what i have so far but my teacher gave me no credit. What am i doing wrong? i tried rearranging it but no success.
A fast-food vendor sells pizza slices at $1.25 each, fries at $1.00, and soft drinks at $0.75. Write a program to computer a customers bill. The program should use 4 subprocedures that do the following:
1. read in the amount of each item ordered
2. calculate the total cost
3. display an itemized bill
4. read in the users full name from a textbox, and display a sentence, addressing the user by first name only and in upper case characters, informing the user of their bill
Here is an example itemized bill: Item Quantity Price Pizza slices 3 $1.25 Fries 4 $1 Soft drinks 5 $0.75 Total $11.50
Example sentence for point 4: if the user name was entered as John Smith, you would display the sentence JOHN, your bill is $11.50.
MY
Public Class Form1
Sub pizza(ByVal pizzap As Double, ByVal pizzanum As Double) lstoutput.Items.Add("Pizza Slices" & pizzap & "and" & pizzanum & "is" & (pizzap * pizzanum) & ".")
im using this code to display records in a datagrid.. DataGrid1.DataSource = mycls.ShowData mycls.Showdata is a function that in a class that i used to display data.. what i want is to create a progress bar that indicates the actual loading of the data to the grid.. cause it has some delay in displaying if data is to large..
