Produce A Total For Values In A Datagrid And Them Display Them In A Label?
Jul 30, 2006How can I produce a total for values in a datagrid and them display them in a label?
ADVERTISEMENT
Payroll Calculator - Program Must Calculate And Display The Total Pay In The Total Pay Label
Oct 6, 2010The pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
Sum\total A Bunch Of Cell Values Of An Unbound Column In A Datagrid To A Textbox String?
Dec 22, 2010I was wondering the best method or code to Sum\total a bunch of cell values of an unbound column in a datagrid to a textbox string. this request is 100% genuine...im not some student trying to get you guys to finish my project, this is purely for educational and personal information for myself. im new to vb.net.
View 2 RepliesHow To Add Values Entered Into TextBox1 And Display Total Sum Into TextBox2
Sep 16, 2011How can I get the sum all the values a user enters into TextBox1 to display that sum into TextBox2.The user is going to enter one value one by one. The user enters '1' into TextBox1, therefore, TextBox2 should display '1'.If the user than enters '2' into TextBox1, TextBox2 should display '3'.If the user enters '2' into TextBox1, TextBox2 should display '5'.And so on.TextBox2 should only display one value at a time, not one after another.I am using double because I need decimal places.I have a ListBox1 where it displays all the values entered by the user in rows one by one, but I prefer not to use the ListBox1 to get the sum of all the values entered in TextBox1 and to have TextBox2 show that sum. Because in that ListBox1, I have few other things in there, like Strings, which will not allow the sum of all the values entered in TextBox1 to be calculated and displayed in TextBox2.Not sure if this matters or not, but I thought it might.So only need TextBox2 to have all the values entered in TextBox1.If 1 was entered in TextBox1, TextBox2 shows 1.Then 2 is entered in TextBox1, TextBox2 will show 3.
View 18 RepliesVS 2005 Display In A Datagrid Total Consumption Of Gas (litres) With Kilometers Driven (mileage) Between 2 Dates
Aug 29, 2011i am doing a small project for my business and i got stuck with this 2 weeks ago and still no progress.I have an access db table "store" that has columns: (filldate,brand,model,plateno,mileage,litres) where i am storing these info each time a car in my company fills gas. For example8/25/2011,Renault,Megane,5487844,3943,20).What i want to do now is to display in a datagrid the total consumption of gas (litres) with the kilometers driven (mileage) between 2 dates.
View 2 RepliesDisplay The Values Of Domestic, International, And Total Sales Of Company "Conway Enterprises
Aug 15, 2009I'm making an application in school where I have to display the values of domestic, international, and total sales of company "Conway Enterprises." Everything seems to be working except it is not displaying the totalCompany sales as a currency. I'm sure it's probably an easy fix but I've been searching the internet and re-reading my book for awhile with no results. Below is the code, as I said everything seems to be working fine aside from adding the two array values and then displaying them as currency.
[Code]...
How To Get DataGrid Cell Values And Insert Into Label
Feb 21, 2010Using VB.Net. I want to get a all datagrid cell values, then insert into table1.
Code
cmd = New SqlCommand("insert into table1 values('" & DataGrid.Rows(0).Cells(0).Value & "', '" & DataGrid.Rows(0).Cells(1).Value & "', '" & DataGrid.Rows(0).Cells(2).Value & "', '" & DataGrid.Rows(0).Cells(3).Value & "')", con)
cmd.ExecuteNonQuery()
The above code is inserting first row of datagrid cell value, but I want to insert all the datagrid cell values. How to modify my code for getting all the datagrid cell value.
.net - Read A CSV File And Display The Values In A Datagrid?
Jun 22, 2009I'm using VB 2005, how do I open a CSV file and read the columns/rows and display the values in a datagrid?
CSV file example: jsmith,jsmith@hotmail.com
I then want to perform an action on each row i.e. each user, how would I do this?
Drawing A Figure - Display Something In A Label And Taking Some Values From A Textbox
Aug 8, 2009I would like to draw a figure like this. But i do not know how to start drawing it. What i could do is simple mathematics calculation, display something in a label and taking some values from a textbox.
View 18 RepliesOutputting Total To Label?
Mar 7, 2012I am stuck on trying to get the sum of numbers to output to a label. I have a label box lblTcost that I would like to have the total of my list box lstCost placed into there. I have tried several things and keeps crashing or just not working at that part. I have used the debugger but since I know the line is wrong any ways that not helping. I though this line would work lblTcost.Text = lstCost.ToString("c") was the proper way but it isn't. Here is my completed code
Public Class Form1
Private Sub btnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click
'Declare values from both listboxes
Dim Day, Fee, Stay, Total As Integer
[code].....
Total Time From Calendar On Label?
Oct 24, 2011One DateTimePicker (Calendar) Label. My calendar is the "Start Date" option. What i need is this: when choose a date from calendar it automaticly show the total time en the label.
View 16 RepliesCounting Total Rows On A Datagrid
May 10, 2011I am trying to count all the rows on a datagrid after it has been populated from my DB. I have searched online on how to do this but nothing seems to work.[code]where test is my datasource it gets thrown into
View 1 RepliesAsp.net - Set Label Text To Total Row Count Of Gridview?
Jun 3, 2010I'm using a stored procedure in a sql database as the data source for a SqlDataSourceControl on my .aspx page. I'm then using the SqlDataSourceControl as the data source for a gridview on my page. Paging is set to true on the gridview. What i would like to do is set the text of a label to the total number of rows in the gridview. I can use this code
'labelRowCount.Text = GridView2.Rows.Count & " layers found"
to return the number of results per page, but it doesn't give me the total.
Code A Label To Show The Total Cost?
May 31, 2010I have a assignment and I have got to do the total cost and put the total in a label, here is the code. Select Case pizza1
[Code]...
Find The Total Row Count Of Datagrid Using Column Name?
Apr 27, 2012Protected Sub invokePagination(ByVal table As DataTable)
'CallPagination() As PagingControlDTO
If table.Rows.Count > 0 Then
Me.DataGridPaging1.Visible = True
[code].....
The code which is underlined is to be replaced.Instead of this I want to use column name to get the total count , since it contain the total count.Column Name is "TOTALROWCOUNT"
VS 2008 Filtering A Datagrid Based Upon A Specified Total
May 5, 2010I am trying to filter a datagrid based upon stepping through records and suming the contents. What i am trying to do is get to select records that equal (or if the sum of records exceed the entry they revert to the previous record) or less than the entries specified in a combobox on a form.
View 9 RepliesVS 2010 : Total Price Of ProductsID In Datagrid?
Apr 11, 2012I have a Datagrid with 4 columns. Column 1 is ID, Column 2 is Products, Column 3 QTY, Column 4 Price and Column 5 is Total. I would like to get the Total of Column ID if it has 3 of the same ID and the Column 3 Price is $10.00 ea. Then on the Coulumn 4 Total get a result of $30.00.
View 3 RepliesAsp.net - When Click Save Button Label Display Successfully Done But After Few Second That Label Should Be Disappear
Oct 29, 2011I'm try to hide the label after few second but it is updating page continuously after 10sec, i just want it once time when i click save button label on display me successfully for 10sec and get disappear
[Code]...
Asp.net - Total Value Of All Radiobuttonlist Values?
Feb 11, 2011I have 20 radiobuttonlists on a page. Each has 4 options with values 1, 2, 3 and 4.What I need to do is on submitting the form, get the total value of all the radiobuttonlists (eg 3+1+2+3+4...) divided by the total number that have actually been filled in (none of them are required fields so anything from 0 to 20 of them could have been filled in) - hence getting an average value.
View 1 RepliesMy Class - App - Add To The Total That I Have With New Values
Apr 20, 2010I am having a issue with my app, I know it is going to be something easy that I am doing wrong, but I just can find what it is. I am to take a quantity of an item and then * by the price of the item to get the total. This works fine when I get the first values, but if I want to add to the total that I have with new values, well, thats were I am having issues.
Here is my button
Private Sub Btn_Add_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Btn_Add.Click
'Declaring the instants of my class
Dim Sale As New BookSale
[CODE].............
And here is my class
Public Class BookSale
'Setting the vars so the can be used as calculation
Private dec_quantity As Decimal
Private dec_price As Decimal
[CODE]..................
Add Values In Listbox To Total Up In A Textbox?
Sep 16, 2011Before I begin, want to say this is my first post and I am a newbie. My first time using VB. How can I add values in a listbox that were entered by a user to another textbox in total?For ExampleSay my code for now is this.
ListBox1.Items.Add(textBoxValue.Text)
Dim X As Double
X = textBoxValue.Text
[code].....
Counting Total Fail Values In Column
Nov 12, 2011I have put datagridview on form. I have add one column and 7 rows. Beginning four row contain value "PASS" respectively and last three rows contain value "Fail" respectively. I have to count total fail values in a column in CellEndEdit Event.
View 2 RepliesDisplay The Total Value Of DecMiscCharges + DecCharges
Dec 3, 2009Trying to figure out why exactly it will display the total value of decMiscCharges + decCharges.
[Code]...
Display Total Up Value From Progress Event
Jun 21, 2010I'm trying to display the total extraction progress of a zip file as below. This gives me the total file size of all uncompressed files in the zip:
For Each backup In zip
TotalSize = backup.UncompressedSize + TotalSize
Next
I'm then using this to get the current bytes transfered:
TranferTotal = e.BytesTransferred + TranferTotal
The problem is this value resets after each file is extracted from the zip. I was expecting the above to "tally up" the total so I could use it for the progress bar but it seems to still reset after each item? Also, I'm using a global varible for the transfer total, if there a better method to transfer this information to the StepEntryProgress? The reason I'm doing this is because the DotNetZip Library does not support multiple extraction in this way, so I need to tally up in this way.
Code:
Imports Ionic.Zip
Imports System.Threading
Imports System.ComponentModel
Public Class Form1
Dim TotalSize = 0
[Code] .....
How To Calculate And Display Total Due Amount
Oct 6, 2009This should calculate and display the total amount due. There are 3 radio buttons, A, B, C. Nonprofit should get a 20% discount from final charges.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
Private Sub RadioButton1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles radA.CheckedChanged
[Code] .....
VS 2008 How To Display Total Time
Jan 20, 2010I'm trying to have a Label display the total time the program has been open and updated in real time.
View 9 RepliesCalculate - Display A Total Gross Earnings
Jun 15, 2009In my form I have Gross Earnings Calculated. Then that goes to a label. I then click a button to Clear Current Employee. Then I can input another employees info to get that employees Gross Earnings. Well when I click View Summary I want to display a Total Gross Earnings. The Total Gross Earnings should be a Total of all Employees Gross Earnings.
View 4 RepliesCalculate The Total Spend Of The Project And Display It On Either The First Tab?
Jun 23, 2011my question is regarding a calculation and control display that I am doing.
The application is a project tracker, and I am trying to calculate the total spend of the project and display it on either the first tab if it is an open project or the second tab if it is a completed project. For some reason, it is showing 0 for all but one of the projects. If anyones eyes can see the problem I would be really greatful. The code is below
[code]...
Display A Grand Total From A Text File?
Feb 8, 2009i have a list of 5 names and 5 amounts contributed saved on a text file called:
"G:mailinglist.txt"
Iv created a button and a textbox beside it. Basically i just want to be able to select the button and the values from the text file are added to display a grand total into the textbox.
The values are:
34
70
20
12.50
9
20
I would also like to have the text box display the grand total in Pounds (�) but again i do not know how to.
How To Get Total Sum From A Listbox And Display It Automatically Into A Textbox
Mar 15, 2012Ive got a Listbox which displays a data/record from a SQL database, it displays "Amount" and only numbers would appear. it has a datasource.
Goal: I'd Like to get the total sum of those numbers from the Listbox and Display it to a textbox automatically or by button click event.
I thought of two ways to do this, but I don't have a clue on what to do.
1. I tried summing it all up on that exact Listbox and display the total on the textbox, here's the code that i came up with..
[CODE]...........
But the data im working with is from a database, so i got this error:Conversion from type 'DataRowView' to type 'Double' is not valid.
2. I thought of having another Listbox and "Copy" the contents shown on the Listbox1 and then sum it all up on the Listbox2, then lastly display the Total on the Textbox. I did a little research on how to accomplish that but all the clue i found is that i have to disconnect the listbox data from the datasource from being bound, and reconnect it again.. I really don't have any idea on how i could do that with an SQL database.
Here's a quick flow on what im trying to accomplish to make things.
Record from Database -----Displays on---> Listbox1 -----User Clicks--> Button1 ----Displays Total sum on----> Textbox1