Total Time From Calendar On Label?
Oct 24, 2011One DateTimePicker (Calendar) Label. My calendar is the "Start Date" option. What i need is this: when choose a date from calendar it automaticly show the total time en the label.
View 16 Replies
ADVERTISEMENT
Payroll Calculator - Program Must Calculate And Display The Total Pay In The Total Pay Label
Oct 6, 2010The pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
VS 2008 - Time Measure - Total, Average, Estimated And Finished Time
May 3, 2009I need a start date, a Total time passed until now, an average time per step, and a estimated time to finished. How can I do that? Also, I can close the application and when start up again I want to get the time counters as the last time, so How can I store that data is normal txt file (I say txt to take advantage of the ini app file which is a txt).
View 1 RepliesOutputting Total To Label?
Mar 7, 2012I am stuck on trying to get the sum of numbers to output to a label. I have a label box lblTcost that I would like to have the total of my list box lstCost placed into there. I have tried several things and keeps crashing or just not working at that part. I have used the debugger but since I know the line is wrong any ways that not helping. I though this line would work lblTcost.Text = lstCost.ToString("c") was the proper way but it isn't. Here is my completed code
Public Class Form1
Private Sub btnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click
'Declare values from both listboxes
Dim Day, Fee, Stay, Total As Integer
[code].....
Add Total Time + Lunch Time ?
Jul 23, 2010The web on adding TOTAL time, not just 7pm + 6pm etc. Essentially what I'm trying to do is add total time + lunch time. For example, 30:00 (30 hours) + 01:00 (1 hour) = 31:00 (31 hours). The input method is textboxes, which I'm willing to change if there's a better way;
txtTotalHours = 30
txtTotalMins = 00
txtLunchHours = 01
txtLunchMins = 00
I guess what I'm looking for is to take these strings, convert them to TIME and add them together. Theres a bit more to my project, but I'm sure if I can get this method down, I can figure out the rest. I can do this very easily in excel using [HH]:mm formatting.
Asp.net - Set Label Text To Total Row Count Of Gridview?
Jun 3, 2010I'm using a stored procedure in a sql database as the data source for a SqlDataSourceControl on my .aspx page. I'm then using the SqlDataSourceControl as the data source for a gridview on my page. Paging is set to true on the gridview. What i would like to do is set the text of a label to the total number of rows in the gridview. I can use this code
'labelRowCount.Text = GridView2.Rows.Count & " layers found"
to return the number of results per page, but it doesn't give me the total.
Code A Label To Show The Total Cost?
May 31, 2010I have a assignment and I have got to do the total cost and put the total in a label, here is the code. Select Case pizza1
[Code]...
Produce A Total For Values In A Datagrid And Them Display Them In A Label?
Jul 30, 2006How can I produce a total for values in a datagrid and them display them in a label?
Calendar View - How To Get Breakdown Of Time Slots
Jun 3, 2011I am doing a project for college where I have a booking system. The people book for a time slot and I would like to work out how to have a break down of time slots say for one hour periods throughout the day. Something similar to the bottom half of this picture [URL]. How would I go about something like this in VB.NET?
View 10 RepliesUse Calendar For Lower Time Format In Program?
Apr 22, 2012How to use calendar for the lower time format in vb?
What i try to achieve: if the lower date is saturday and sunday replace it for friday same week (if date = 2012-04-21 or 2012-04-22 the date = 2012-04-20).
Calculate Total Time?
Jan 6, 2012I have many time result in my hand... like
10.10.23 (hours,minute,seconds)
01.14.15
How can i calculate total time?
Time And Total Calculation?
Aug 23, 2011I'm making a simple program. It is almost finish in a manner of simple function. But I have problems related to time, clock and calculating codes. I admit that this software based on cyber cafe management software. I try to make a new one and less complicated and easier to use for my shop.
I tried to googling and find some coding then try to apply it in but it won't working.
In this simple program:-
1. User click the checkbox. (time start)
2. User click the STOP button. (time stop)
3. Total RM textbox will show the total currency.
[Code]...
VS 2008 How To Add Up Total Time
Jul 19, 2009It will send a message to a chat you are in every 5, 10, 20, 30, 40, 50, or 60 minutes (you get to pick the time)I would like it to add up the total time they are gone (in minutes)so if they are gone for 2 hours and they choose 30 it will add up in a label saying "60". and when you stop it, it will send a message saying "Back from idle gone for "time" minutes.And if I can, Can I convert the minutes into like instead of "gone for 60 minutes" it would be "gone for 1 hour" (if not that's fine, that is just and extra I would like)
View 3 RepliesVS 2008 How To Display Total Time
Jan 20, 2010I'm trying to have a Label display the total time the program has been open and updated in real time.
View 9 RepliesVS 2010 Progress Bar Total Time?
Jun 4, 2010I have created a little backup script to backup users files, and incorporated a little progress bar.The backup script backs up 5 main directory's on the users PC.Is it possible to have the status bar display total time for each individual directory? instead of each folder within a directory? [code]
View 4 RepliesDate / Time Represented By String Is Not Supported In Calendar System
Aug 9, 2011I have a application which gets info from an external feed where dates are in the format ddMMM. I'm trying to turn them into full date format so I was using DateTime.ParseExact. Which was correctly working out whether it should be 2011 or 2012 . But it is erroring when trying to parse 29FEB (which should be 29 Feb 2012. I can guess why its erroring. But if that correct behaviour is this documented and is there a better alternative? [code]
View 8 RepliesCalculate Total Time In Crystal Report?
Mar 14, 2010I am creating a report in vb.net using crystal reports and need help on finding sum of dailyworkhrs in my crystal reprot. I have a feld which calculates dailyworkhrs and now i would like to find the total of it. For example:
07:30:12
08:30:10
OUTPUT Should be
16:00:22
Find Total Time In Crystal Report?
Sep 16, 2009I created one crystal report in that i print time for each user. finally i want to calculate total time. so wat should i do to calculate total time. i tried with sum method......
View 1 RepliesHow To Adjust Time Calculations (Total Overall Hours)
Sep 26, 2010In some text boxes I enter times like "08:00 16:00" then another textbox next to it will display 8 hours then a label at the bottom calculates the total overall hours. There are a total of 7 textboxes for times entered and like the example above and another 7 for the calculation of that days hours worked. My problem is when I enter "08:00 16:30" the total hours in that text box would be displayed "8.5 hours". I need to tweak this so it is displayed 8 1/2 hours. My second issue is that the label that displays the overall hours only calculates if I enter times like "08:00 16:00" if i entered "08:00 16:30" it would not calculate
Here is my code:
vb
Private Sub txtMondatTimeKeeping_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtMondayTimeKeeping.TextChanged, _
txtTuesdaysTimeKeeping.TextChanged, txtWednesdaysTimeKeeping.TextChanged, txtThursdaysTimeKeeping.TextChanged, txtFridayTimeKeeping.TextChanged, _
txtSaturdaysTimeKeeping.TextChanged, txtSundaysTimeKeeping.TextChanged
CalculateHours()
[Code] .....
Calculate The Total Time A User Spending On An Application?
Jun 24, 2011I want to create an application that able to calculate the total time the user (i.e. myself) spent on a particular application, for example Firefox. And this application should display warning message if the user spent a lot of time on Firefox (for example 1 hour or more)Reason: I'm a VB.NET developer. During my working hours, my main tool is Visual Studio and I suppose to do coding. But I need Firefox occasionally to access internet (particularly SO and other sites) to find solutions for my programming problems. The problem is I addicted to SO and SO sucks my time for hours until I have forgotten that I suppose to continue coding and not browsing the SO site.
View 6 RepliesCode Total Cost To Give Pound Sign With Total Cost At Moment When Total Comes Up
Jun 7, 2010How do I code the total cost to give me a pound sign with the total cost at the moment when the total comes up for an example it gives me 3.6 when I need it to show £3.60 here is the code I have so far. [code]
View 2 RepliesCalendar Control - Add Text To A Specific Day Of The Calendar?
Dec 30, 2011using the calendar from the webfor tools, NOT CALENDAR EXTENDER, and my question is, is there a way to add text to a specific day of the calendar, for example, that i want to click on the number where its shows 29 of the month december, then it shows me a texbox or anything that takes data from my, and i type anything in there, like an event or something, then i click on a button to save my entry, and next time i visit my page i see that day that i clicked on changed its color and shows my text when i hoover the mouse on top of it,
View 7 RepliesAdding A Default Time To A "SelectedDate" From Calendar Control?
Jan 24, 2009I have an application where I want users to select a date with a calendar control, but I want the time to automatically be set for 5:00pm. How do I accomplish this before storing the value in a database? I am using VBScript.
View 1 RepliesLoop Through Top Level Folder In Mapped Drive And Give Total Count Of Files And Total?
Oct 28, 2008I am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
How To Calculate Discount In Percent % And Get Total In Total Column
Jun 8, 2011I am using visual basic 2008 amd creatomg a datagrodview format like below [code] Now I wnat to get total balance in total column after less discount in percentage with ENTER EVENT proceedure and get the whole total column balance in a textbox i.e Net BalanceTextBox. Please tell me how to calculate discount in percent % and get total in total column and also tell me how to move cursor in next cell instead of bottom row in datagridview.
View 2 RepliesIDE :: Sum Up Total In An Unbound Datagridview Column With Total To Textbox?
Apr 22, 2011I have 3 columns in a unbound datagridview, "length" "height" and "Total". Total = length x width and the final total in TextBox outside of the Grid. I found question simalar in this forum and tried the code but i am getting errors.The following is the code i am using
Public
Class Form1
Dim UnboundColumn[code]...
Add The Time That App Was Compiled At Into A Label In App?
Jun 7, 2009I want to add the time that my app was compiled at into a label in my app. For example if you went to the about dialog on my app it would say 'Compiled 07/06/2009 20:05', any ideas on how to do this? Im using VS2008 and Visual Basic.
View 1 RepliesUsing Month Calendar - User To Enter A Bill And Pick The Due Date Via Month Calendar?
May 5, 2010I'm developing a finance software and I want the user to enter a bill and pick the due date via month calendar. I getting it to work was the easy part, but now I only want one month calendar, for each time a user enters in a bill and picks a date.every time the user goes to pick a due date I have to call one of the several I have on screen.Here is my code that I have so far:Add due date button:
Me
The month calender:
Me
.TxtDueDate3.Text = MonthCalendar3.SelectionRange.Start.Date.ToShortDateString()Me.TxtDueDate3.Text
= MonthCalendar3.SelectionRange.End.Date.ToShortDateString()[code].....
Change A Label Over A Time Increment?
Apr 11, 2012I am trying to make a label that changes every second for an event. What I currently have makes the thread sleep all the way through from "Rock" to "Shoot" and skips the "Paper" and "Scissors". Does anyone have any ideas as to what I should do to properly display the label so that they are all displayed in equal time increments?[code]...
View 2 RepliesDisplay Items In A Label - One At A Time?
Nov 18, 2009I have 10 items in a listbox. (Just text) How can I display one item (text) at a time from the listbbox in a label every time a user clicks on the NEXT button. (The label will just display a new row of the listbox every time a user clicks on Next)
View 3 Replies