I am trying to perform a task while the word count of a richtextbox is less than a user entered value, but the word count keeps coming out miles out, here is what I have:
Dim count As Integer = 0
RichTextBox1.Text = ""
Do While count < NumericUpDown1.Value
[code]....
designing a Windows based computer program that will allow a user to enter some number (n) and a choice of a count up or count down for that many numbers. So for example, the user enters 5 as their number and selects the count down option, the message box displayed would contain the message: "Here are your numbers: 5,4,3,2,1,0"
View 14 RepliesHow to count no. of characters entered in multiline textbox, i wanna enter maximum 140 characters in my multiline textbox using vb.net ...
In short i want textbox to enter limit is only 140 characters .[code]...
I have to write a program that does a count down on the number of seconds you entered in the GUI I have most of the code and it basically has to countdown the seconds i type in the txtStart. Attached is the program design..This is what i have so far with the code. It converts seconds to hours and minutes and seconds, but it doesn't do the countdown.[code]
View 2 RepliesCan i use the timer when the user tries to log-in and the user entered a wrong password 3 times.i will give the user 5 mins to log-in again with the correct password and if the user enters the wrong pass. 3 times again i will give another 10mins also this is what i want when the user close the program the timer is also their and running that it will give the user the remaining tym on how much tym left 4 him to log-in again.Can i do this in vb.net??i dont know how 2 do this i dont have a clue if it is possible can someone give me a code??
View 9 RepliesI made my program and now I just need to add in the serial and trial part of the application. I know the application must connect to the host and go to a txtfile. How would i do the trial and serial. Also If the serial is already activated I want the application to reject that Serial and Count how many times they entered in a wrong serial.
View 2 RepliesI have an EXE that creates objects based on params passed to it.Say I have textboxes named 57 and 21.I want to read the values entered by the end user.
Var1=57.text
Var2=21.text
How do I pull this data from the boxes?
My project consists of a user interface designed in Visual Studio 2010 Express. I have it linked to an Access database. At this time, I have two text boxes that the user will enter a number. I want to be able to write a query that will take the first and second number and pull the information from the database that is equal to or greater than the user entered number
View 6 RepliesI Create an application that when a user enters a positive integer value in a input box(the default number is 10) when the OK button is clicked, the application should display a message box with the sum of all the integers form 1 through the value entered by the user. If the user enters a negative value, the application should display an error message. I believe I have to use a loop condition but I have no idea what to do.
EX: User enters 10 in the input box once OK button is pressed a message box pops up and says "The sum of the numbers 1 through 10 is 55". Use the following test data to determine if the application is calculating properly
VALUE SUM
5 15
10 55
20 210
100 5050
I have a report that requires the user to enter their ticket number, then they click view, and it generates. Pretty standard. What I would like to do is have the report automatically export to a pdf when they click view. Does anyone know if this is possible and how I would approach the matter?
View 1 RepliesHow do i check if user has entered all inputs and go to the next form.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
t1.Focus()
End Sub
[code]....
In this code it gives an error, but after displaying the error it jumps to next form.
I have a datagridview and, I know I am a bit weird, but when believe it or not, when a user enters a new row I want to insert that row in the database. And even weirder, when a user changes a row in my datagridview I want to update (imagine that) the database.
View 1 RepliesHow do I prevent users from a inserting a duplicate value using SQL Query
datatype is VarChar(50)
e.g. the name field has already been defined as "Josh", I don't want it to be able to add another "Josh"
Ok so I have designed a program to figure out commissions for phone sales at my company. Since the devices we sell and their associated prices change over time, I had to make that data within my program dynamic. I have a form within my program (frmprice) that has 160 textboxes - 80 for the devices and 80 for the associated prices. Now I hard coded the .text members with default values for our current stock of phones and prices.
I also added code so whenever that form with the phones and prices (frmprice) closes it saves any changes that have been made to either the phones or prices and when the form loads it overwrites the default data with any data that the user had entered at last run.
HERE is my logic problem. At the very first run the program is overwriting the default hard coded values with "" because no user data has ever been entered before. So when the form with the prices loads, it passes the user entered data from last run which is null because it has never run before. If I test to see if default value <> the user entered data before it executes the code to pass the user entered values it will always test to be true because the user entered data is null at first run. If I test to see if the default value is = to the user data it will always at first run test to be false because there is no user data yet.
HOWEVER once the user entered data is initialized (anytime after the first run) I need the program to pass the user data from the previous runs back in. Just NOT at the first run. Here is the code i am using: (in the code below the variables ending in "val" are the ones that are of the type string and are saved in the application settings) The frmprice_Load Event:
[Code]....
I created a usercontrol which has a Textbox and a Label. Setting the (boolean) textvalidity property we can toggle the icons on the label to show if the user has entered a valid input.
Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
[Code]......
The problem is... when the control is used... the constructor initializes it to true (According to my code) so the icon is already displayed.
I've got a (hopefully) quick question. I've got textboxes attached to a binding source on one of my forms, and when I add, then clear, the data for the next entry to be added a small problem arises. If the user has previously entered something into, for example, Textbox3 and the user does not have the data for Textbox3 the user cannot move to the next field unless something is entered into the box.
[Code]...
Does anyone know of a good way to have a user enter an amount of time (hours and minutes) using winforms controls? At the moment I have two numeric up downs, one for time and one for minutes that I then parse to create a timespan. The only other idea I have is a text box that a user can enter a "00:00" time in, and validate the input. Both of these ways seem a bit bad (in UI terms) though.
View 5 RepliesWhen I run this application the 2% menu item works fine but the 5% does not. It does nothing at all. I'm stuck.
[Code]...
I am trying to show message when user didn't enter any data in datagrid and click on save button it should display message please enter the required fields but I am using this code for this purpose.
For Each cell As DataGridViewCell In DataGridView1.Rows(DataGridView1.RowCount - 1).Cells
If cell.Value Is Nothing OrElse cell.Value.ToString = String.Empty Then
MessageBox.Show("Please Enter the Required Field(s)!", "ITPCHR", MessageBoxButtons.OK, MessageBoxIcon.Stop)
Exit Sub
[Code] .....
When I click on save button without entering data it give me message please enter the required fields but when I enter the data in datagrid it didn't save data and gives same message please enter the required fields.
I'm trying to create an app to launch at start up that will ask you what applications you want launching, or if you want all your favorite app's to start up etc. But before I go any further, I think its crucial to know how to save settings that a user has entered (such as program location and name in this case) so that he/she doesn't have to enter them every time at start up.
So far I have just made this, can anyone tell me how I would get it to save the settings entered?
Code:
Option Explicit On
Module Module1
Dim name As String
[Code]......
I have a question in relation to formatting text fro 24-hour time.
The format I require is always as follows 00:00
How can I make the ":" appear as soon as the second digit is entered as this is required to separate hours from minutes and also how can I force a 0 to appear for any numbers up to and including 9?
Examples being: 00, 01, 02, 03, 04, 05, 06, 07, 08, 09.
These zeros are required but may be forgotten by the user entering them into the textbox?
I am trying to get my program to validate the hexadecimal range entered by the user, the range being between 00 - FF,
View 17 RepliesI have created a small program that performs various calculations with data entered by the user. I need to be able to save the entered values and the results on the system running the program and be able to open it at anytime in the future and have the values and results displayed in the correct text boxes. I am currently reading up on some tutorials but I was just curious as to how I can send all my data in Visual Basic to my database in Microsoft Access?
View 4 RepliesI am building a search engine in vb.net which would have to search for a word entered by the user in 40 text files within the project directory. It should return the results as the total number of matches (text files) and the number of times this word is in each file.
View 5 RepliesI have already wrote my own Registration checking software in VB.NET, however I wanted a Special key that I could use in the Registration, and I want to get this from the user, so when they download my software I will with online feature send them a Serial Number, which they will enter when they install the software, I then want to write it to the Registry using the Setup and Deployment project, so that my application can retrieve it every time it is run to check Registration.
View 1 Repliesthe project here is to take the three amounts from three text boxes entered by the user and return a string in a label telling the user if the triangle is either a right triangle, equilateral triangle, or neither after clicking a button. The code I have must use a new Class named Triangle. No matter what is entered in the text boxes, the label always returns "You created a right triangle!"
[Code]...
I have a Form1 with TextBox1 and Button1.
Here is what I'm trying to do: When Button1 is clicked, I want an Excel file created and saved into a default folder (the user does not choose the folder...code for Button1_Click will choose the folder), and the file name will be the text that the user enters into TextBox1.
The problem is this: I have two forms. One form and the other form do mathematical calculations. I want to save the values that the user inputs, so when the user quits the program and then starts it up again the values are still there. But when I open up the program, start typing in values, then calculate them, hit quit. Try to open up the program again, its giving me a message that the input file is invalid. When I click ok, the program doesn't crash, continues. But the values are not there at all. The other form I put exactly the same code, just changed the variables and it doesn't want to save the values at all! I wrote this code for saving and loading the values:
[Code]...
writing a function to validate that a user has entered their full name (so at least two names must exist in the textbox).
View 2 RepliesI want to access (read/write) the user entered text for a document.The document text is housed inside a CONTENTEDITABLE DIV tag within a html document.The html document is loaded into the webbrowser object (webbrowser.navigate(path and filename)).When the html document (bulletin.htm) loads,An error is popped up such as ACCESS DENIED to toolbar.htc and menu.htc And the toolbar and menubar are missing or corrupted.I have tried to generate the code for the document using the code below.
Function ScriptEditorHeader() As String
Dim sBuf As String = Nothing
sBuf = ""
sBuf = sBuf & "<html "
[code]....