Drawing Rectangle Inside Ellipse At Runtime?
Jan 2, 2010How to draw a rectangle inside an ellipse at runtime?
View 8 RepliesHow to draw a rectangle inside an ellipse at runtime?
View 8 RepliesHow to draw a rectangle inside an ellipse by mouse events like mousedown,up,move
View 2 RepliesI'M creating a kind of photo viewer, and I cannot figure out how to orient the scroll buttons with the photos I want to draw because they all are different sizes.This is really hard to explain so please ask questions if you don't understand.I'M thinking if i could draw every photo on a single rectangle and then the scroll bars will position that rectangle up or down. but is there a way to make a rectangle inside another one so it only shows inside that rectangle?
View 10 Replieshow can i type text in a ellipse that i draw using graphics.drawellipse method
View 2 Replieshow to place text inside an ellipse? I didn't see that anywhere in here.
View 5 RepliesI have used this code to draw an rectangle around the panel
vb
Private Sub Form1_Paint(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Me.PaintWith Panel1 e.Graphics.DrawRectangle(Pens.Gray, .Left - 1, .Top - 1, .Width + 1, .Height + 1) End WithEnd Sub
but when the form is resized the rectangle isnt drawn properly.The panel has Left,R,T,B anchor.
i have a problem when I draw a rectangle the sides of the rectangle aren't the same width
I don't know what's wrong this a picture about the problem[URL].. and here is the code
Imports System.Drawing
Imports System.Drawing.Drawing2D
Public Class Form1
[Code]...
I have try many different methods but still no avail.how to do this? As i found a good tutorial over
here where it create a resizable rectangle on a form. But what i want is on a picturebox with image.
Okay, I've got a rectangle shape named Header and in the form class I Dim a new rectangle named DrawingRect. Here is the code that I used to set the location coordinates and size.
Dim DrawingRect As New Rectangle(Header.Size.Width - 18, Header.Size.Height - 17, 14, 14)
Whenever I run the program, however, it stops me and says "InvalidOperationException was unhandled". How do I get this to work?
Looking for something like:
dim rect as system.drawing.rectangle
For each point in rect
Debug.print(point.name, point.value)
Next
I have made a program that lets you select an area of a picture and then crop it, I am having problems while drawing the rectangle that shows which area will be cropped, following is my code.
[CODE].............
This is declaration of all the variables that I am using.
[CODE].............
Over here I send the graphics handle of the "canvas" control (which is just a picturebox) to a higher level, so I can use it later.
[CODE].............
Over here I get the starting position for my rectangle
[CODE].............
This part is supposed to draw the rectangle, as I am moving the mouse over the Canvas control, but I get an error where the rectangle is being drawn, I originally thought that the problem might have been with the fact that as soon as I begin moving the mouse, the CropWidth and CropHeight variables are at zero, and that is causing the invalid input error. So I made it that it would not draw the rectangle until it reached a minimum size of 4 x 4 pixels but it still does not fix the error, I debugged to see if there was a problem with the values of the variables, but they all seemed fine, I even tries doing this CanvasGraphics.DrawRectangle(Pens.Red, 20, 20, 20, 20) so as to eliminate the factor of the wrong values, but still the same error.
I am trying to make a rectangle that can be resized by the userby clicking and dragging the edges/corners of the rectangleTypically, if the mouse enters the rectangle region, then smalladjustment boxes should appear at the corners of the rectangleand also at the middle of the rectangle's edges (to allow the userto drag and resize the rectangle). When the mouse leaves therectangle region, then the adjustment boxes should disappear.I have the code to draw the rectangle and to produce the smalladjustment boxes, but I'm not sure how to accomplish thedrag and resizing steps (or if it's even possible with the way mycode is written).
Code:Imports SystemImports System.DrawingImports System.Windows.Forms
Private bBlocking, bValidBox As Boolean Private pt1, pt3 As Point Private rectBox As Rectangle Private cornerRect1 As Rectangle Private cornerRect2 As
[code]....
I'm just getting started, and it's as simple as that: I need guidance to draw a rectangle or place a dot or a point on Form1, in VB 2008 Express. I knew how in VB6 -- let's build on that.
View 3 RepliesI'm drawing a rectangle snapped to a grid by getting the start point(Mouse down e.location) and the end point(mouseup(e.location). The coding I'm having trouble with is having the program determine which way to draw the rectangle(where the location should be, and the height and width.) Now, this would be extremely simple if the user started their rectangle from the top left corner and ended it in the bottom right every time. But you need to be able to drag from all angles. So does anyone have some code lying around that I could look at so I could actually get my rectangles drawn right?
View 5 RepliesI know how to get a Color (Pixel) from a location
im BMP As New Drawing.Bitmap(1, 1)
Dim GFX As System.Drawing.Graphics = System.Drawing.Graphics.FromImage(BMP)
GFX.CopyFromScreen(New Drawing.Point(MousePosition.X, MousePosition.Y), _
New Drawing.Point(0, 0), BMP.Size)
Dim Pixel As Drawing.Color = BMP.GetPixel(0, 0)
Me.BackColor = Pixel
What I need assistance in is, I am going to create a form. and i wanted to know if there is a way. to Check (not using the mousex and mousey positions) for example. a Rectangle Sized Location to see if anywhere in the back red appears and if red does appear To give an error.
I'm writing a .NET program for an engineering company. Their specification is to find the number of holes (either of same or different radius) on a rectangular plate and then to find the area of the rectangle and also area of the circle inside that rectangle. It's not essential that the circle touches the rectangle.
View 1 RepliesResizing a Rectangle shape when the program is running.
View 14 RepliesI draw text (comment on item in an invoice ) inside a rectangle.
[Code]...
I have no problem, the text appear on several lines and it is well wrapped. But if the text is too long to be drawn inside the rectangle, I need to draw the text not drawn in another rectangle (on another page). How can I know the text not drawn in the first rectangle ? I think it is more difficult to use MeasureString because the text is wrapped.
The rectangle is drawn with drawrectangle and the text with drawstring, but the text doesn't fit. Is a runtime adjust possible?
View 2 RepliesI'm making a custom class that mocks the System.Drawing.Rectangle class because the Rectangle class doesn't have a name property. I need a name property because I am adding all of my rectangles to a collection and I need a little more info stored than just their locale and size. So I changed the _onPaint event but nothing is working out when I run the program?
Public Class Rectanglar : Inherits UserControl
Public BackgroundColor As Color = Color.Blue
Public Sub New(ByVal name As String, ByVal XY As Point, ByVal Widthy As Integer, ByVal Heighty As Integer)
[code].....
I have a Form1 where i can add usercontrols during runtime. I draw their appereance in the OnPaint event using the GDI+ engine. The greate part is that i want to be able to resize these images during runtime wich goes pretty well now cause i draw points in percentage of the control. Unfortunetly it is very difficult to draw nice images/drawings ect with the GDI+ engine. Is there any other way in doing this?
[Code]....
I have a rectangle with drawings inside it. I want to draw something else on top, but later restore the original insides without necessarily know what they were.
View 4 RepliesI'm trying to create a bunch of labels during runtime that will be "inside" a picture box, so when I move them, if their new coordinates are outside the box's dimensions they wont display, or if they're right on the edge of the box only half the label will be visible etc.
I thought label.Parent = picturebox would work but it doesn't seem to do anything, and Google keeps telling me to set the label's container to the picturebox - which sounds right, but maybe it's no longer a VB.NET thing since the Container property seems to be Read Only.
i need to be able to drag and drop my picturebox with an image in it around my winform in vb.net.
View 2 Repliesi'm trying to reference an object dynamically inside a loop; something like this:[code]
View 6 Repliesi've got a little problem with List(on T) variables.
[code]...
It works perfectly fine. Does anyone know what the problem is?
I want to set the value of x that is the location of the controls inside a selected usercontrol at runtime. i want to set it to be 0 when there is no control on the usercontrol and i want it to be x += control.width. how can i do this, maybe how can i detect that there is a control inside the usercontrol.
View 8 RepliesGiven a rectangle of width w and height h. and a coordinate x,y in that rectangle I would like to identify which triangle I am within.
i.e. the function should take parameters(x,y) and return a,b,c,d or a zero based number representing that triangle index i.e. (0=A,1=B,2=C,3=D) if they are in that order.
I think this would be something like >= the formula of the red line and >= the formula of the green line?
I'd like to implement this in VB.NET
I have a DataGridView in one of my form which at a certain point I resize an change it's position. I would like to be able to restore it to the designer's default position at runtime. I know I could save it before changing and then restoring it later, but I feel like there surely is a way in .NET to just restore a control position to it's default.
View 2 RepliesI am designing a simple user interface using winforms. In the designer I have a panel on the form and would like to add a datagridview control into the panel at runtime and set the dock property of the datagridview to 'Fill' so that it fills the panel.
I am struggling to do this and following code is not working out for me:
Dim MyDataGridview as New DataGridView()
MyDataGridView.Dock = DockStyle.Fill
Me.MyPanel.Controls.Add(MyDataGridview)
I don't get an error but the datagridview isn't visible. It gets added 'behind' the panel and so I tried using .SendToBack() and .BringToFront() methods thinking that the panel was hiding the datagridview but this doesn't seem to work either. At any rate, it seems like the datagridview is being added to the form but just not docked within the panel