I created a code that will prompt someone to enter a name and if the name is in the array it should print out the correct integer, but it keeps printing out not valid.
Private Sub btnDisplay_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnDisplay.Click
Dim strSub() As String = {"Jasmine", "Sean", "Devon", "Jontae", "Whitney"}
Dim intNumb() As Integer = {15, 10, 11, 12, 5}
Dim strSearchFor As String
[Code] .....
I am migrating over to VB2008 and I get it except for printing. I can print but I have lost a lot of the methods to print dynamically and I need to know the secret not to pull my hair out doing this. These are the circumstances I need to fill:1. Multiple Document Interface (Parent Document) holding multiple forms.2. Each will print from their own form page but this is the scenario I am trying to accomplish which I did rather well in VB6:Dynamic page length. As it runs through the data and deciding what needs to be printed. All print statements are mapped. currenty =y currentx = x.
a. Calls private sub HEADER to print header (eg store name address) resets currenty= 0
b. Calls private sub BODY based on selections answered. Not answered then omitted.if currenty > 9 inches and you are not done then call private sub TRAIL then HEADER and continue in the BODY recheck for currenty >9 inches and not done printing
c. Calls TRAIL to finish off.
Now I have been able to do all this using the Imports Microsoft.VisualBasic.PowerPacks.Printing.Compatibility.VB6 statement but that is using the old methods and may or may not be usable in 64 bit mode processing.When I use the printdocument.print() method , everything must be handled inside of the printdocument events. Going out of the routine to call another section causes the document to end and start a new page. Since gosub routines are not allowed, it is almost impossible to jump around to make this run properly. Am I missing something???? Can I form the document in different subroutines and pass a completed page to the printer with graphics??
I can do this by constructing the document in a picture box sending all the print commands go to an image the old VB had a more stable image container that did not disappear if minimized or another window openened over it by auto-redraw. I thought about saving it as a .jpg and them printing but that is still just crazy. There has to be a simple way of constructing multiple pages that I am just missing.
I get the error mentioned when printing to a network printer.The error does not occur when run under XP/Win2003, in a WinForm app or when a local printer is used.The error does only occur when run as a Windows Service under Vista/Win7/Win2008 and printing to a network printer.The Windows service runs under a network user that has access to the network printer. Before I print I check if the printername (including network path) is ok by looping through the available printers.
View 1 RepliesI am creating an Income Survey project in VB and I'm having trouble with coding the printing. I am supposed to use the "e.drawstring" method to print. I need to print all the current elements in the array.
My question is, looking at the attached code, how do you print from my array? If you look at the last line of code, I get an error stating that: "Overload resolution failed because no accessible 'DrawString' accepts this number of arguments."
My code/syntax is obviously incorrect. The incorrect code I used to print the array is at the bottom of the code, while the array information is near the top (not sure how much relevant code I need to show). [Code]
Private Sub Command4_Click()
Dim x As Integer
r = InputBox("Enter row size ")
c = InputBox("Enter coloum size ")
[code]....
This is my code for taking inputs in an array. Here everything is working fine except this line "Text1.Text = Text1.Text & vbNewLine & vbCr" here i am trying to print the array in row-coloum in 2D form inside a text box but its not happening "vbNewLine or vbcr" both are not working and my array is getting printed in a single line.
I am having trouble conceptualizing how to create and load my 3d Array. The Project does the following:
View 6 RepliesI have BIG trouble trying to understand the decleration and creation of an instance with respect to arrays of objects. Basically I struggle with with this error:
Object reference not set to an instance of an object.
complete the test code I made below, so that I can try to understand it..? Been figthing with this for hours..
Code:
Public Class Point
Public x
Public y
[Code].....
I want to build an array with info from an XML file.
The number of columns is static, but the rows will be increased once in awhile and I want one column to populate in a combobox while corrosponding selectedindex appears in a textbox. I think I can figure that part out, but currently stuck at the array building.[code...
I'm working on a program that has to get a set of images and then scan them to find pixels that match colors in an color array. Anyway I think I got everything working but how to load the images in as bitmaps. See the images are dynamic, they change there filenames so I can't call them with a static call like Dim bmp2 As New Bitmap("c:button.gif").
So I am using a loop to feed the images into an array for bitmap but thats not working, anyway that I can do this as, right now the program gets all the filenames for the images from a text file that is sent in to us. All I need to do is have the program check each image for pixels that match our color list. But I cant get the images into the bitmap array.
[URL]..And put into a dynamic array where each month represents a record in the array with 3 given with C/P, Strike and Settle
The criterion is for every month grab all C/P that have matching strikes thus returning the following for every month. See data below and what I would like to return below. Want to use excel VBA to return the values from array into a sheet in excel. See data below
[Code]...
A project requires to allocate a varying number of byte arrays (buffers).
It would be ideal if the following definition would be possible:
Dim ArrayOfBuffers() as buffer(10000) as Byte
The byte arrays must be ordered sequentially because they have to be written to a file by efficient procedures destinationFile.Write(ArrayOfBuffer(3),1000,1000)
The number of buffers will change during program execution sometimes. Therefore it would be nice to be able to do a ReDim on the data structure when needed.
I've been programming in VB.net for a while off and on, but never really had a need to use custom classes till now.I built a function in a module to populate a class, The class how ever is supposed to refer to one instance.I need to create an array of this class but the amount of instances needed is not always known.Works fine till the class goes to populate the class array.[code]It's probably something simple, I've just starred at it to long. Keep gettitng "Object reference not set to an instance of an object."
View 1 RepliesDoes this create a dynamic byte array?
Code:
Private m_renderedReport As Byte()()
Or this actually creates a structure?
I'm trying to find the sum of all the digits that make up the number 2^1000, which you may have guessed is from Project Eula. I think it's good so far except I'm just learning about arrays and dynamic arrays, so how will I know what the size of the index will be so I can specify when the Do loop should stop so I don't get an indexoutofrange exception?
vb.net
Dim BigNumber As Double = 2 ^ 1000
Dim DigitArray() As Char = BigNumber.ToString.ToCharArray
Dim Index As Integer = 0
Dim SumOfDigits As Integer = 0
[Code] .....
I m trying to manipulate some excel sheet data in visual basic but for tht i hv converted the excel file into text tab delimited file. now i m able access each column n row value as i want but the prob is the text file has to b input n the no of columns in it could be varied so i need a method to count the number of elements in th tab delimited array wen first time the text file line is read.
View 8 RepliesBasically im having problems programming an array as double. I have it as ' public arrytotal() as double ', however I keep getting the error messages
1. Error 5 Operator '+' is not defined for types '2-dimensional array of Double' and '2-dimensional array of Double'. C:UsersAlexDocumentsCafe AssignmentCafe AssignmentconverthomeBackupWindowsApplication2Form2.vb 115 22 WindowsApplication2
and
2. Error 1 Value of type 'Double' cannot be converted to '2-dimensional array of Double'. C:UsersAlexDocumentsCafe AssignmentCafe AssignmentconverthomeBackupWindowsApplication2Form2.vb 84 19 WindowsApplication2
Is it possible to program an dynamic array as a double? i have seen examples of this online, but cannot seem to do it.
Private Sub LoadButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles LoadButton.Click
Dim lin(8) As String, filRead As StreamReader, i, x, t, d As Integer
[Code].....
I am getting a run time error it is not saving to textfile
I am attempting to figure out the best way to place values into an array using dynamic data that is continuously streaming in from a ComPort. I want the array to hold 5 values at a time, with the newest incoming data point taking the place of the oldest data point. Each set of values in the array will be used in finding a trendline, which is then used in a later portion of the code.
View 1 RepliesI need a way to delete the last element in an array when I don't know how big the array is.Basically I need the VB version of php array_pop, but nothing relevant seems to be appearing in search results.
View 2 RepliesI create an empty boolean array check_state(), and then if a condition is met later in the script, I redim it and save a list of check box states as booleans into the array, and later check the array values, but I can't work out how to do this without causing an error if the array was not defined to begin with
View 1 RepliesI'm trying to create an array of checkboxes dynamically and also want to put event to those checkboxes. For example: I have a array of checkboxes - Chk1, Chk2. I want it to work this way: When I check Chk1, I want to disable Chk2, and when Chk1 is unchecked, Chk2 is enable, and vice versa.
[Code]....
I have a SQL database which I'm running a query against to return a list of names - eg using "select names from table"I would like to add all of these names to an array so I can use them later. To do this I would need to use a dynamic array as the number of names returned could be anything.Apart from first running "select count(names) from table", getting a value and then Redim'ing the array on the count is there another method I can use.I've seen there's a dataset row.count? Can I somehow use this?
connection.Open()
reader = command.ExecuteReader()
While reader.Read()
[code]....
I need to dynamically create some sort of 'table' on my form. It should look like:
PIC1 INTEGER1 TIME1
PIC2 INTEGER2 TIME2
PIC3 INTEGER3 TIME3
On top of that it should look like a table and have gridlines between the 'cells' containing the picture/data, which makes it even more difficult for me. Before, control arrays were quite simple in VB6, but I've been searching for 1,5 hours now and I can't figure out how to do this in VB.NET 2010. Any idea how to tackle this the most efficiently?
i'm using VB.net 2003 application program. i'm trying to convert a VB6 program to VB.NET. The VB6 code i'm trying to convert is shown below. declared g_Share() array in module and trying to add values to it inside form.
[Code]...
i'm using VB.net 2003 application program. i'm trying to convert a VB6 program to VB.NET. The VB6 code i'm trying to convert is shown below.declared g_Share() array in module and trying to add values to it inside form. VB6 (Code inside Module)'Global type array to hold printer info.
Public Type OShare
PrinterName As String
BackupName As String
CurrId as Integer
End Type
'Declare dynamic array for printer info as user-defined type declared above.
Public g_Share() As OShare
VB6 (Code inside Form)
Public Sub LoadPrinters()
[code]....
when pgm runs and when it reach ".PrinterName = myReader(0)" line, it crashes. Object reference not set to an instance of an object. using immediate window i can see the myReader(0) value. how can i create dynamic array for user-defined type in vb.net?
i'm using VB.net 2003 application program. i'm trying to convert a VB6 program to VB.NET. The VB6 code i'm trying to convert is shown below.
declared g_Share() array in module and trying to add values to it inside form.
VB6 (Code inside Module)
'Global type array to hold printer info.
Public Type OShare
[Code]....
how can i create dynamic array for user-defined type in vb.net?
I have a small problem, classes and threading with classes. The problem I have is a dynamic array variable defined in class. In the code below, when error pauses the code, I can see the data in the correct form but I can't write rigth code that writes the data to richtextbox.
Public Class Form1
Public k() As Integer
Private Class zaratma
[CODE]....
Private Sub LoadButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles LoadButton.Click
View 3 RepliesI have an array that is dinamic (0f course). I want to create a structure that can then accept values from the array. I want to use a loop (For Next) or Do While, but i am not sure of the Dinamic declaring of the structure variable or new parts.
Structure T_Results
Dim PlayerName As String
Dim RD1 As Integer
[Code].....
ArrayList is a generic structure. Let's say I have my own structure (contained of Boolean+string+int). I want to set a dynamic array based on my own structure. How....?
View 9 Replies
