i am creating dynamic Groupbox and at a time i am creating checkbox in the groupbox. it`s working properly.How can "refer" or "call" the Dynamic Groupbox and Dynamic Checkbox.Clearly , If i am creating 10 GB`s and within GB`s for each GB i am creating two checkboxes OK.Now i want to use the checkboxes some other purpose. so how can i write syntax for that...?
View 11 Replies
I has some checkbox created in a window form groupbox. May i know how can i find all the checkbox whether they are checked in the groupbox?
Code:
For Each ctrl As Control In Me.Controls
If ctrl.Name <> checkBox.Name And (TypeOf ctrl Is CheckBox) Then
If ctrl.Name.Substring(0, 3) = "ADJ" Then
[Code]...
I am using the above codes to find the checkbox, but it seems like not able to find the checkbox that are created in the groupbox.
i am using vb2010, i am trying to make a groupbox with many checkbox inside i wane builds a function that will go throw all the checkboxs and return a string with the text of the chechbox(for ex: a pizza add-on where the user check what he wants)i dont wane start writing an if statment for each cheackbox becuse if ill have 1000 of them then it is stuped...
View 6 RepliesI am trying to detect whether a checkbox is checked and display a message for the ones that are.I am running Visual basic 2010 and The code is as follows: Dim message As String If CheckBox1.Checked = 1 Then 'MsgBox("Checked") message = message & CheckBox1.Checked & vbNewLine MsgBox("You Have Choosen" & vbNewLine & message) question is what is wrong with this code? I get an error that message value has not been declared.
View 2 RepliesI would like to use code to create a checkbox with default properties and place it at a certain position in a groupbox. For example, i would like to do this by pressing a button and that i can give in the name and tag by use of an imputbox. Also, i have noticed that if something like this is done, these changes aren't permanent and don't apply to the designer nor the code in VB. Is there a way to let the newly created checkboxes appear in the designer? And what about permanently deleting checkboxes by pressing a button. With "Dispose()" it isn't deleted from the designer...
View 2 RepliesI'm using a CheckGroup in a project found here. There were several things in the code that needed fixing to really be useful to me:The fact that the panel in the regular groupbox overlapped the checkbox control so that the bottom of some letters were being cut off. When changing the back color of the groupbox, it didn't change the back color of the checkbox. Fixing these two problems was easy, but fixing the second one led to a new problem. When changing the backcolor of the groupbox to Transparent, it also changes the backcolor of the checkbox to Transparent, thus displaying the text for both the checkbox and the groupbox's header.
View 8 RepliesI've tried trimming the text, but for some reason, the white text rectangle extends way beyond the text of my checkbox when I create it dynamically. I'm creating a tight array of checkboxes--does anyone know how to prevent this from happening?
View 1 RepliesI am working on a little project and am having some issues with a checkbox. I am adding a number of checkboxes to an ASP table via code by adding rows and columns dynamically. This all works fine except for when I go to check them based on loading a preexisting record. For some reason some of the checkboxes are getting set to TRUE when the new row is added to the table. [Code]
View 1 RepliesHow can I check the 'Checked' property of a dynamically-created checkbox during the Page_Load subroutine? Basically, I have a VB.NET page that creates some table rows dynamically, based on a number selected by the user. So, for example, if the user selects "3" from a dropdown list, the page posts back and creates three table rows. Each row contains a couple of textboxes, a dropdown list, and a checkbox (which are all .NET form controls rather than plain HTML controls, I should point out).Typically, the user would enter a few details into the form controls, and click the 'Submit' button, after which the page iterates through each row, and inserts the data into a SQL Server table.But if the user ticks the checkbox for that row, this signifies that the page is to ignore that row, and NOT insert that row of data into the database when the user clicks 'Submit'. This works well, but there is a problem. If the user clicks 'Submit' and some of the values entered into the form controls are invalid (so, for example, the user didn't enter their name) then the page won't submit the data, and instead, shows an error to the user informing them of the values they need to change. But if the user creates three rows, for example, but decides to "ignore" the third row (by ticking the checkbox) then when the page posts back, finds some invalid entries, and re-shows the form to the user to allow them to correct any errors, I'd rather the page didn't render the third row altogether. After all, they chose to create three rows originally, but then decided that they only needed two. So it makes sense that the third row is not recreated.
But what seemed to happen was that objCheckbox.Checked was always returning False, even when the checkbox was ticked. Once the page had loaded, the table rows had rendered again, and the tick was present in the checkbox, so it's not like the value was lost on postback. But at the point I check whether the checkbox is ticked, it always returns False, rendering a table row that the user doesn't need.Does anyone know how to get round this problem? I've read lots of articles about the .NET ViewState, and the page lifecycle, but I've yet to find a solution that works. I simply need to be able to check if a checkbox is ticked before re-creating some dynamic controls. [code] But then I basically found out that you can't override a protected member with a public one.
i have a sort of problem when i try to add some linklabels in my groupbox. I used this
Me.Controls.Add(Groupbox3)
Groupbox3.Controls.Add(FlowLayoutPanel)
I can only add 4 linklabels no matter how big is the groupbox, i tried autoscroll but nothing. How can i do to store minimum 20 linklabels in a groupbox? Here is the whole code i used:
Imports System.Net
Imports DevComponents.DotNetBar.Controls
Imports System.Windows.Forms[code]....
Is there any way, maybe with a specific reference to put a control that records what plays wmp activex and to save somewhere on your computer?
Here using VB .Net 2008. I seem to be having trouble getting group boxes to appear when I click a radio button.
For example:
CODE:
This indeed brings up the first radio button however I have other groupboxes underneath which with the same code will not appear when the radio button is checked.
Eg:
CODE:
The second groupbox does not appear and is directly behind the first groupbox. The Top code doesn't seem to be working either.
i have created a dynamic tabpage and a dynamic tablelayoutpanel inside it then added dynamic textboxes and labels inside the tablelayoutpanel...the thing is , i am having a problem on how to access the value of those textboxes and labels and add them as new columns in the new table(tagpage) in mysql database, i can already create the table in the database but i cant add the new columns in it. heres the code for accessing the values of the labels and textboxes
error: NullReferenceException was unhandled....Object variable or With block variable not set.
sql = "alter table " & tbl_selected(counter) & " add " & frmMain.Controls("TLP_" & SecArrList_sp(counter2)).controls.item(SecArrList_sp(counter2) & "label" & counter).Text & " varchar(100) NULL;"
I would like to bind a DataGridView to a different LINQ query every time (in order to reuse the same form/DGV for different queries), like this:
[Code]....
but the "Qry", and the number of comboboxes, and their field names would change every time.
I have a question, I can't really find the answer...Basically I have 2 FormsIn form number 1 I have 2 pictureboxes. I want to create a checkbox in form2 that says if checkbox 1 is checked then show picture 1 in form 1
View 1 RepliesI have a ListView with Checkboxes in vb.net and what I want to do is when the user check the checkbox, the program ignore the response of the user in checking the checkbox, instead it leaves the checkbox uncheck.
View 4 RepliesI am creating an Interactive map which displays the facilities when the user clicks on the Checkbox, such as toilets.It will display all the toilet locations via PictureBoxes.I want to do this without having to write all this code?[code].....
View 15 Repliesi have 5 checkboxes in webform and textbox1... when i search the record using the date specified in textbox1 when i enter 11-Dec-2010 in Textbox1 and click on submit button then checkbox1, checkbox2, and checkbox3 will be disabled and unchecked .....
[Code]...
Basically i have one TabControl with a form and 2 browsers within one form I have ProBlem To call the dynamic browser to navigate with dynamic Textbox.text
[Code]...
I've wondered if i can make it so when i click on a checkbox you may not beable to check another. And i do not want to use radio buttons
View 9 RepliesI have a DataGridViewCheckBoxColumn who's column name is "booReadyToReport want to hide all the checkboxes in this column if "bintAnalyteCodeID" doesn't equal the selected value in a combobox on my form. ut I run this bit of code the DataGridView DataError event fires currently, have nothing in the event except an comment. he code seems to work, but I'm new to VB.NET and I'm wondering if this is the correct way to handle thishould I use the CellPainting event?
highlight rows with RBF3
For Each dr As DataGridViewRow In Me.dgvCalculatedResults.Rows
f dr.Cells("bintAnalyteCodeID").Value = Me.cbxAnalyte.SelectedValue Then
[code].....
I need to represent the following query using LINQ:
DECLARE @PurchasedInventoryItemID Int = 2
DECLARE @PurchasedInventorySectionID Int = 0
DECLARE @PurchasedInventoryItem_PurchasingCategoryID Int = 3
DECLARE @PurchasedInventorySection_PurchasingCategoryID Int = 0
[code]....
Now, I know that a query in .NET doesnt look like this, this is my test in the SQL Design Studio. Naturally VB.NET variables will be used in place of the SQL local variables.My problem is this: All of the conditions after "WHERE" are optional. In that a query might be made that uses one, some, all, or none of the conditions. V.PropertyID and V.Value can also appear any number of times.In VB.NET I can make this query easy enough by simply concatenating strings, and using a loop to append the "V.PropertyID/V.Value" conditions.I can also make a Stored Procedure in MS SQL, which is easy enough.However, I want to accomplish this using LINQ.
Ive managed to dynamically create a form, and dynamically create a timer, but i have not been able to create the timer on the dynamic form. Specifically, i need to be able to have the timer itself create another form with a timer. (I realize that this would create a new form every interval on the timer, that is what i want to do)
1. A way to add the timer to the dynamic form, and maintain the timer sub on my main form.
2. A way to create the whole thing over (dynamic form and timer) through the previous dynamic form and timer.
I was thinking i could use a collection/array to store the forms and timers, but i'm still having trouble figuring out how to add entire forms or timers into a list. (A timer is not considered a control, so i cant use a controlcollection...)
Heres my code;
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim frm As New Form
[Code]....
*EDIT* Btw, my idea was to use i as a variable that increases every time a form is created, then insert the form into the array, with i as the integer. i just need to know how to create a new form with a different name each time. (as with timers)
I have some DataGridView code written in vb.net. (Nothing is attached to a datasource.)The 4th column is a checkbox cell.How do I detect if that checkBox is checked or unchecked?This code strangely reports TRUE or FALSE at random times. It even turns ON the checkbox in rows other than the row I clicked in. (Huh?)
Private Sub DataGridView1_CellContentClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellContentClick
Dim whichGrid As DataGridView = CType(sender, DataGridView)
[code].....
I've tried countless other methods... none seem to actually get the checkbox ON/OFF value in vb.net.
I've got a form with parent-child setup. The parent displays name and other demographic info.The child displays multiple addresses, one row at a time. There can only be one primary address for a name and this is designated by a checkbox at the top of the child form.If the user wants to change the primary address to another address,then they find the other address and click on the checkbox.The form checks the other addresses and if one is found that is designated as primary,the user is warned that one already exists and prompts them to change it.
So for example, a name has 2 addresses, the 2nd being the primary address.The user wants to change the 1st address to be primary.They click on the Primary Address checkbox for the 1st address.A warning displays that there is already an address listed as primary.The user then answers the prompt to change the 1st address to the primary address.The checkbox for the 2nd address will be unchecked and the checkbox will be checked for the 1st address.My problem is getting the checkbox unchecked for the 2nd address.If I close the form and reopen, then the checkbox is unchecked.How do I refresh the checkbox for the 2nd address?Here is the code I'm using to find if an address has already been marked as primary:[code]......
I have a form that i need to be 100% Dynamic. So it could contain 10 labels maybe 100 who knows.
When you hover over a label there will be a different contextmenustrip to appear for each and every label. So all the contextmenustrips are Dynamic and contain 1 option maybe 2 options even 3 or 4 up to the users settings.
My problem is not creating a handler for when the user clicks on the contextmenustrips options. The problem is knowing which one of the options for that contextmenu was clicked!!
OK, I'm trying to display tooltip text for a dynamic edit box. Well, at least I'm trying to.
On my form, I've got a tool tip control which I've conveniently named ToolTip. My edit box displays OK. But, what I want to do is when the user hovers their mouse over the text box, I want the tool tip to display some text.
I think there are two problems that I'm having. I'm not convinced that I'm properly addressing a dynamic text box name. Ideally, I would want to be able to refer to the text box (but using a dynamic variable that will contain the prefix of the name). To hardcode, I would want to be able to achieve (not in this example but in theory): ABCDEFGt_0300.Text = "hello"
Dim controllerName as string = "ABCDEFG"
Dim t_0300 As New TextBox()
Me.Controls.Add(t_0300)
[Code].....
I have 2 columns of checkboxes in a gridview, where the header also contains a checkbox. If i select the header checkbox, it will check all corresponding checkboxes in its colomnow, what I want to happen is if I select column 1 checkbox, column 2 checkboxes should get unchecked and vice-versa.
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
[code]....
I am refreshing a form, and I want to assure the checkboxes are cleared when refreshing. I can clear the textboxes and masked textboxes, but cannot figure out to revert the checkbox back to the UnChecked state.
[Code]....
Code:
Whenever the textbox says "Default" and I click on the checkbox, the msgbox pops up twice. Any way to fix this?
Can a vscrollbar be used in a groupbox. I have a group box with lots of items in it, but my program window is not long enough to diplay all of it. I wan to tuse the scroll bar in the groupbox.
View 2 Replies
