I has some checkbox created in a window form groupbox. May i know how can i find all the checkbox whether they are checked in the groupbox?
Code:
For Each ctrl As Control In Me.Controls
If ctrl.Name <> checkBox.Name And (TypeOf ctrl Is CheckBox) Then
If ctrl.Name.Substring(0, 3) = "ADJ" Then
[Code]...
I am using the above codes to find the checkbox, but it seems like not able to find the checkbox that are created in the groupbox.
i am creating dynamic Groupbox and at a time i am creating checkbox in the groupbox. it`s working properly.How can "refer" or "call" the Dynamic Groupbox and Dynamic Checkbox.Clearly , If i am creating 10 GB`s and within GB`s for each GB i am creating two checkboxes OK.Now i want to use the checkboxes some other purpose. so how can i write syntax for that...?
View 11 Repliesi am using vb2010, i am trying to make a groupbox with many checkbox inside i wane builds a function that will go throw all the checkboxs and return a string with the text of the chechbox(for ex: a pizza add-on where the user check what he wants)i dont wane start writing an if statment for each cheackbox becuse if ill have 1000 of them then it is stuped...
View 6 RepliesI am trying to detect whether a checkbox is checked and display a message for the ones that are.I am running Visual basic 2010 and The code is as follows: Dim message As String If CheckBox1.Checked = 1 Then 'MsgBox("Checked") message = message & CheckBox1.Checked & vbNewLine MsgBox("You Have Choosen" & vbNewLine & message) question is what is wrong with this code? I get an error that message value has not been declared.
View 2 RepliesI would like to use code to create a checkbox with default properties and place it at a certain position in a groupbox. For example, i would like to do this by pressing a button and that i can give in the name and tag by use of an imputbox. Also, i have noticed that if something like this is done, these changes aren't permanent and don't apply to the designer nor the code in VB. Is there a way to let the newly created checkboxes appear in the designer? And what about permanently deleting checkboxes by pressing a button. With "Dispose()" it isn't deleted from the designer...
View 2 RepliesI'm using a CheckGroup in a project found here. There were several things in the code that needed fixing to really be useful to me:The fact that the panel in the regular groupbox overlapped the checkbox control so that the bottom of some letters were being cut off. When changing the back color of the groupbox, it didn't change the back color of the checkbox. Fixing these two problems was easy, but fixing the second one led to a new problem. When changing the backcolor of the groupbox to Transparent, it also changes the backcolor of the checkbox to Transparent, thus displaying the text for both the checkbox and the groupbox's header.
View 8 Repliesi have a sort of problem when i try to add some linklabels in my groupbox. I used this
Me.Controls.Add(Groupbox3)
Groupbox3.Controls.Add(FlowLayoutPanel)
I can only add 4 linklabels no matter how big is the groupbox, i tried autoscroll but nothing. How can i do to store minimum 20 linklabels in a groupbox? Here is the whole code i used:
Imports System.Net
Imports DevComponents.DotNetBar.Controls
Imports System.Windows.Forms[code]....
Is there any way, maybe with a specific reference to put a control that records what plays wmp activex and to save somewhere on your computer?
Here using VB .Net 2008. I seem to be having trouble getting group boxes to appear when I click a radio button.
For example:
CODE:
This indeed brings up the first radio button however I have other groupboxes underneath which with the same code will not appear when the radio button is checked.
Eg:
CODE:
The second groupbox does not appear and is directly behind the first groupbox. The Top code doesn't seem to be working either.
I have a question, I can't really find the answer...Basically I have 2 FormsIn form number 1 I have 2 pictureboxes. I want to create a checkbox in form2 that says if checkbox 1 is checked then show picture 1 in form 1
View 1 RepliesI have a ListView with Checkboxes in vb.net and what I want to do is when the user check the checkbox, the program ignore the response of the user in checking the checkbox, instead it leaves the checkbox uncheck.
View 4 RepliesI am creating an Interactive map which displays the facilities when the user clicks on the Checkbox, such as toilets.It will display all the toilet locations via PictureBoxes.I want to do this without having to write all this code?[code].....
View 15 Repliesi have 5 checkboxes in webform and textbox1... when i search the record using the date specified in textbox1 when i enter 11-Dec-2010 in Textbox1 and click on submit button then checkbox1, checkbox2, and checkbox3 will be disabled and unchecked .....
[Code]...
I've wondered if i can make it so when i click on a checkbox you may not beable to check another. And i do not want to use radio buttons
View 9 RepliesI have a DataGridViewCheckBoxColumn who's column name is "booReadyToReport want to hide all the checkboxes in this column if "bintAnalyteCodeID" doesn't equal the selected value in a combobox on my form. ut I run this bit of code the DataGridView DataError event fires currently, have nothing in the event except an comment. he code seems to work, but I'm new to VB.NET and I'm wondering if this is the correct way to handle thishould I use the CellPainting event?
highlight rows with RBF3
For Each dr As DataGridViewRow In Me.dgvCalculatedResults.Rows
f dr.Cells("bintAnalyteCodeID").Value = Me.cbxAnalyte.SelectedValue Then
[code].....
I have some DataGridView code written in vb.net. (Nothing is attached to a datasource.)The 4th column is a checkbox cell.How do I detect if that checkBox is checked or unchecked?This code strangely reports TRUE or FALSE at random times. It even turns ON the checkbox in rows other than the row I clicked in. (Huh?)
Private Sub DataGridView1_CellContentClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellContentClick
Dim whichGrid As DataGridView = CType(sender, DataGridView)
[code].....
I've tried countless other methods... none seem to actually get the checkbox ON/OFF value in vb.net.
I've got a form with parent-child setup. The parent displays name and other demographic info.The child displays multiple addresses, one row at a time. There can only be one primary address for a name and this is designated by a checkbox at the top of the child form.If the user wants to change the primary address to another address,then they find the other address and click on the checkbox.The form checks the other addresses and if one is found that is designated as primary,the user is warned that one already exists and prompts them to change it.
So for example, a name has 2 addresses, the 2nd being the primary address.The user wants to change the 1st address to be primary.They click on the Primary Address checkbox for the 1st address.A warning displays that there is already an address listed as primary.The user then answers the prompt to change the 1st address to the primary address.The checkbox for the 2nd address will be unchecked and the checkbox will be checked for the 1st address.My problem is getting the checkbox unchecked for the 2nd address.If I close the form and reopen, then the checkbox is unchecked.How do I refresh the checkbox for the 2nd address?Here is the code I'm using to find if an address has already been marked as primary:[code]......
I have 2 columns of checkboxes in a gridview, where the header also contains a checkbox. If i select the header checkbox, it will check all corresponding checkboxes in its colomnow, what I want to happen is if I select column 1 checkbox, column 2 checkboxes should get unchecked and vice-versa.
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
[code]....
I am refreshing a form, and I want to assure the checkboxes are cleared when refreshing. I can clear the textboxes and masked textboxes, but cannot figure out to revert the checkbox back to the UnChecked state.
[Code]....
Code:
Whenever the textbox says "Default" and I click on the checkbox, the msgbox pops up twice. Any way to fix this?
Can a vscrollbar be used in a groupbox. I have a group box with lots of items in it, but my program window is not long enough to diplay all of it. I wan to tuse the scroll bar in the groupbox.
View 2 RepliesI want to group RadioButtons, but I don't want to use the visible control GroupBox. Is there something like the Java ButtonGroup in VB.NET?
View 3 RepliesI have a need to add 16 radio buttons to a groupbox but I want to be able to select 2 radiobuttons per groupbox. (2 vertical columns of 8 radio buttons each) The radiobuttons are created dynamically and each set of eight have different names to distinguish them. Do I really have to create 2 groupboxes and put each set of 8 in each groupbox and put those groupboxes into my parent groupbox? Is that it with radio buttons...if they are all in 1 groupbox then there is no way to select more than one at once?
View 1 RepliesI'm using VB with VSPRO2010 I have a groupbox with its caption on the top right . I would like to place the caption on the top center.
View 5 Repliesokay well I want to be able to change the size of my Groupbox when I check my check box. I have tried this code and it did not work
If Checkbox7.checked = true then Groupbox1.size = (309, 446)
I don't get why this wont work, I tried others to but I cant get it to work.
I want to clear all of the text boxes in a groupbox without hard coding them all. I tried the following snippet, but it also clears all of the form labels which I would like to keep.
For Each TextBox In GroupBox1.Controls
TextBox.Text = ""
Next
from my main form i'm giving focus to a control dynamically to calling form for example i have 3 child form, child1, child2, child3 form main form before i call the form i give the focus to a control which is set on some condition
[Code]...
and when i call child1.controls(cntrlname).focus() it throws the error. any idea how i can give focus using above code to one of my control in groupbox.
In my card game program, I have used 4 main GroupBoxes to act as dialogue boxes. Some contain additional GroupBoxes to house such things as RadioButtons, TextBoxes and CheckBoxes.Software places them when and where needed, so I usually move them apart in the Design screen to keep them all visible at once. However, with each new GroupBox I added to the program, their behaviour became increasingly vexing.In the design window, they are not allowed to overlap, or they will either partially or completely disappear. When they disappear, I have to find them with the Properties Viewer (when selected, the 4 sizing blocks appear and I can tease the drag symbol to appear).Worse, when my program is running, a GroupBox left in the Design mode in an "unfavoured location" (for lack of a better term) will refuse to appear when called.
I have single stepped past the code that positions the GroupBox and makes it visible and I have noted that the top and left positions are correct, but when I let the mouse hover over the word 'Visible' in the line "GroupBox1.Visible = True" the popup reports it as False.There is nothing I can do at run-time to make the GroupBox appear. I must return to the Design window and try moving it to a more favourable location.
The groupbox text is set to TopLeft position if "RightToLeft" property to "No", and to TopRight position if "RightToLeft" property to "Yes". But if I want the text to be set in center, how to do that?
View 2 RepliesI'd like to display a tooltip when the user mouses over a groupbox's title. (ONLY the title, not the box itself)
I'd also like it to move as you move your mouse as well, like Javascript tooltips on many websites.
What would be the best way to do this?
Is it possible to hide all controls in a groupbox using code?
View 2 Replies