I am wanting to export a datagridview to word. I am using Visual Studio 2010 Visual Basic. I am just wondering if there is some basic code to reference Word and start using it to create a table and input the data.
View 5 Replies
I have to export a datagridview in a word document, i already started by creating a header but I don't know how to export my datagridview. I'm a starter in programming vb.net.
Here's the code:
Imports Word = Microsoft.Office.Interop.Word
Public Class Form2
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim oWord As Word.Application
[Code] .....
I am using the written below code for exporting datagrid view to excel . My DatagridView has 17 columns and 2000 rows . The code i am using takes a very long time for exporting data . Is there any other way to do it fast.
[Code]...
I am working on exporting some data to a DataGrid (with no luck). So far I have:
[Code]...
When this runs, I get an error message that says: System.Data.OleDb.OleDbException: The Microsoft Jet database engine could not find the object 'Sheet'. Make sure the object exists and that you spell its name and the path name correctly. The excel file has only one sheet that is named "Sheet", and the location specified in the connection line is correct. Any ideas on why this may be happening?
I have a rendered HTML page that I am exporting to MS Word and downloading on a button click. Here is the code snippet in the button click.
[Code]....
As i need to export my report to PDF. In Crystal Report Viewer the Alignment are perfect.. But when i export into PDF the Alignment changed entirely.. In the Report im using all the Controls ( Text,Line,Box).
View 3 RepliesI already exporting contents of my datagridview to excel and word but I need to format one of the column of my datagridview. That column is "Amount". In my datagridview, it displays like this "122234". I want to display all the value in that column in this format: "122,234.00". I already tried to format it to number("N") in my datagridview but when I exported it to excel and word, it shows no format.[code]
View 4 RepliesI have a working code that exports the datagrid into XLS. However, the datagrid results does not show on my aspx (html) page. It only shows on the page when I comment out the part that exports it to xls. I am not sure whether it should show by default when exporting.Basically, what I want to have is when I click my export button, it should display the datagrid on the page as well as popup an excel "open, save, cancel" window for the export.
Here is my function for referece:
Public Sub Convert(ByVal ds As DataSet, ByVal Response As HttpResponse)
Dim attachment As String = "attachment; filename= ExportPRFs_" & Today() & ".xls"
[code].....
I am trying to gather some information about exporting data contained in a datagrid to an excel spreadsheet. I am not using ASP. The number of rows and columns are not set(fixed). If someone was able to point me in the right direction or even better a quick example. I have search through previous threads and am unable to find any that relate to exporting from a datagrid on a windows form to an excel document.
View 15 Repliesi've made a small tool that searches an access DB in back end & dumps the results in a Datagridview, now i want to export those results to excel, after googling i found a code that does it for me , it's working partially for me. It writes the Headers to a new excel file but then for some reason i getting below error (on the blue line in code):
[Code]...
is there way /means to export from Crystal Report To Microsoft Word and print that document without opening Ms Word Program by vb net
View 7 RepliesI have this code that I got that exports data grid view in excel but I want to use save file dialog in saving the excel file. [code]...
View 1 RepliesI'm looking for a way to export a Word document as a PDF. I would like to do this without the use of a "software printer" (such as CutePDF, etc.) and stick to reference assemblies if at all possible. I'm using Microsoft Office Interop Assemblies to generate a Word Document which I save to a temporary directory. So its not necessary for this solution to interact directly with Microsoft Office, unless it needs to.
View 1 RepliesThis error is ridiculously common, and I'm not too sure why it would be caused this time. What I'm trying to do is export two datagridviews to word, using code from the following website: [URl].. perfectly, and does for the other grids, but at the moment I have the object reference error for the MonthlyCashflow and LoanAnalysis grids. The rows and columns in the grids come from calculations and not my database.
[Code]...
I am writing a program that uses several textboxes that a user will fill in and then click the add button to add the data into the datagrid. There is no backend database or anything. Just seeing the data in the program only.
What I want to do is then export this data from the datagrid into a file, preferably excel.
I've done copying textbox data into txt files but I can't find a method to copy datagrid data into a file.
it's possible for me to export the data from the datagrid and output it into MS Word?I'm actually storing strings of questions inside the database and I need to find a way to print out all those set of questions into MS Word.I saw many links that shows how to export the datagrid to Excel but I can't find any that export the data to Word yet.
View 17 Replies[Code]....
I need to see the next line in the datgrid.
How to export datagrid or Panel to word or excel useing vn.net 2008 windows application ?
View 1 RepliesBasically in visual basic 6 I could access word tables in existing templates with the code owordactivedoc.tables(1).select() where owordactivedoc refers to the active word document and tables(1) refers to the first table in the template.Trying the same code in VB 2003 just leads to errors. Secondly how do I access bookmarks or alternatively word variables.Furthermore how do one deploy web.services. For example the current program I am building is for another computer. Simply copying the web service to Inetpubwwwroot dont work because it is not picked up by the Internet Information Services program. I have to create the web service in vb2003 on the other computer change msconfig manually. Copy and paste the existing service vb file in the created folder replacing the empty vb file.
View 3 RepliesWe have an interactive windows based application written in VB .Net 2010. It uses Word Object to display documents in MS Word. We have a form with a button. When the button is clicked we open the Word document and maximize the Word Windowstate. When we have the Visual Studio Tool running, the Word Document is maximized and has focus, even if we are running the exe from the bin folder outside of the tool. However, if Visual Studio is not running and we run the exe, focus remains on the original form window and the document stays in the task bar.
View 5 RepliesI am trying to write this loop to find the word start and then insert a word in a column until it sees stop and then go through all the data and do that.
[Code]...
I have been trying to figure out how to read paragraph content which exists a heading. The heading itself is part of the table of contents. The heading will have a particular style (say Heading 1). For example: "Introduction" is a entry in Table of content with style Heading 1. I want to read content under heading "Introduction" but not any more content (i.e not content under sub headings of Introduction) I have been trying to do this using styles/style, TableofContent, Paragraphs/Paragraph,Range. Still cannot come up with a effective solution. I am working in VB.NET in VS 2010. I am using the word 2007 object model (office 2007 interop) as [URL]
View 1 RepliesI can search for the word Love in an .rtf file and return every occurance of the word into a RichTextBox. It returns the word and the scripture the word is in, but it also isreturning a bunch of weird text like: archan78988yykp etc etc. How do I onlyreturn the scripture with the searchedword, in this case the searched word is love. The code I am using is as follows:
<
If Line.Contains(Me.rtbSearch.Text) Then
'show search form
[code].....
I have a VB.net application that gets data off our server with ODBC and populates and saves a Word Document. When I try to deploy it to another computer it will get the data just fine and populate the first document, but it will crash before saving it. I've installed the .net framework 4.0, Microsoft Data Access Components, and the Microsoft ODBC .net data Provider. The error code is 0xC0000005, which is from what I can see is called an "Access Violation Exception." It works fine on my computer.
View 3 RepliesI'm using VB to generate a word document When using the += operator to add additional text to a paragraph like
Para1.Range.Text =
myReaderRef("Referral_City").ToString() & ", "
Para1.Range.Text +=
myReaderRef("Referral_State").ToString()
[Code]...
I have document, with numerous pages, that will populate at key locations using a UserForm and bookmarks. One of the pages in the document may need to be repeated. In other words, one of the pages may need to be populated more than once (and inserted successively in the document).
The troublesome page has bookmarks that will need to be repopulated with different information for every new instance within that same document.
I am considering making a table with the verbage in the "Troublesome Document" located in a Table. When I need to repopulate a new instance of that page, I think I should:
1. populate the document
2. copy and paste the wording in a new page
3. insert the new page (without bookmarks yet maintaining formatting) before the "Trouble Document"
4. repeat steps 1-3 for every necessary instance
5. delete the "Trouble Document" with the Table
I'm trying to read a word document for the purpose of obtaining a word count, I realise Word has built in functionality for presenting a word count but I want to write a little app that will omit certain parts of the document from the word count.
So far I have tried this code to open the document but I am getting an error 'Word.Document cannot be found' and 'Microsoft.Office.Interop cannot be found'. I have added a reference to the Microsoft Office 12.0 Object Library under the COM tab. I have Office 2007 installed and I'm using VB2005.
Imports Microsoft.Office.Interop
Dim appWord As New Microsoft.Office.Core.Application
Dim docWord As New Word.Document
docWord = appWord.Documents.Open("c: est.doc")
I have developed a WinForm Application with VB.Net (VS2010) having Office 2010 Professional Installed, and it is 64-bit Windows 7 Platform. The program opens a .doc and .rtf format document, and attempts to save it in htm format. I am using following commands:
Dim sFilePath as String = "C:ABCfile.doc"
Dim oApp As New Microsoft.Office.Interop.Word.Application
Dim oDoc As New Microsoft.Office.Interop.Word.Document
[code]....
All goes fine with development and running on development PC, but when I publish it for offline installation, and deploy it on Client PC having Windows XP with Office 2007, it gives error on oDoc.SaveAs2 line, and program crashes.
VS 2008 08/10 counting vowels in each word,longest/shortest word?
View 8 RepliesThe following code allows words to be added to a listbox. Add the word to a text file and create a folder with the word as its name. The second part undoes the actions.If I try to delete the word immediately after adding it one of two things happen.
1.An error is reported stating the path cannot be found. Although the listbox index value is correct according to the code the error is pointing at that index +1.
2.The code continues to the point of requesting conformation to delete the folder, still pointing at the index value +1. I the action is confirmed the wrong folder is deleted.
However if I stop debugging, then run the code again all works correctly.Is it likely to persist when the application is compiled?
Imports System.IO
Public Class Form1
Dim pathlist As String = "M:Visual Studio 2008ProjectsEnvironment and Conservation GlossaryEnvironment and Conservation GlossaryGlossary List.txt"
[code]....
