I tried opening a .txt file in a multiline text box but textbox.loadfile doesn't work. So then I tried opening it in a richtextbox but then it says the file type isn't supported. So basically how do I create and open .txt files and if I wanted to create multiple file types (.html, etc) then what would be the best way to do that? I am making a multitabbed text editor.
View 3 RepliesI have a vbp file that I would like to open with a computer without vb. I don't need to run the file, but I would just like to look at the source code
View 2 RepliesSo I'm in the final stages of finishing a program I've been working on for nearly a year now, and this is basically my final hurdle. The Save dialogue is working beautifully, with 'flags' in order to switch it over from the regular input into text boxes to the Listbox input protocol.
However, I'm having a *** of a time getting it to take lines from the text file and put them in the proper text box. Here is an example file:
Quote:
SHOWNAME
CALLNAME
BREED
[Code]....
So with the sample file I provided above, in the textbox named callNameText would appear "SHOWNAME", and so on and so forth. With this build, I get a NullReferenceException on the "Me.Controls(strboxNames(i)).Text() = strAllText(ati)" line.
I'am creating a script editor for my own purposes.And i have a menu option called "Close", and i want to check if the file is saved or not, so it no code get lost by clicking wrong.
Anyone have a idea how i check if the file is saved?
I have a text box. and I want to make an editor for it. I want the editor to export a file that the text box will get reference.
Example:I put "Hello!" on my editor then I then it will export a file.now when When I open my program with the text box,The text box should also say "Hello!"
i have 5 textboxes in a form. I have a streamwriter that writes all of their text to on text file like this:
Code:
Dim xfile As String = Application.StartupPath & "/Set.txt"
If File.Exists(xfile) = True Then
Dim writex As StreamWriter = New StreamWriter(xfile)
[code]....
I was wondering how to get the text under the each number and place it in the corresponding textbox.
i want to save String in File Who not Able to open in Text Editor Open it Only on my Application Suposly i want to save Phone Book Contact In this file
Three Text Boxes
1. Name
2. Phon Number
3. @mail Address
i already read these stuff but still not Understand i already check Kaymaf Provided link , but i m not understand Create Your Own Custom File Type
I had to develope a program that shows a list of names and age in text editor. I am able to open the file in text editor but not getting the names and ages when typing it in the text box and clicking my "write button" or the file menu write. Everything else seems to be working fine with the exception of getting my message box twice from the event load. I don't know if the below is enough for you to assist me but this is what I should see in the text editor:
[Code]...
In my setup and deployment project, I have made all the directories I needed. The problem I have is: With the registry keys, how do I enter the value field with a wildcard for the location to the new installation. People don't always use the default location, so I need my key to dynamically set the registry to the correct place. So what do I do? [ProgramLocation] or something?
View 3 RepliesI am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
View 8 Repliestrying to input a text file that's tab delimited that looks something like this.
2.2 5.6
3.7 9
1.2 9.1
[code].....
I need to implement a routine to read a plain text file, BUT that file has a predefined format.The file format is as follows:
Quote:
<FILE_PROPERTIES> 'The "< >" also appears
Propertie1="String" 'It's possible to have spaces after or before the "="
Propertie2="String"
Propertie3="String"
PropertieN="String"
[code]....
Is there any Windows API Routine to read something like that?Or could you point me an URL where something is implemented?I don't want a procedure to read the file line by line and comparing them with Line Input because blank spaces, empty lines and comments starting with " // " may appear too, and I don't want to take them into account, but also I need to save changes to the file, but only to the modified section, without having to read the whole file, and re-write it completely.
Binary access can't work, because I don't know what's the size of each "section", since the number of elements into it can change.
I need something like the "ReadINI" Windows API Procedure, but allowing me to read the "[XXX]" sections headers, and also the "<XXX>" file title header.
Before I begin I would like to mention that I am not a noob in VB, it's just I've never had to do anything this complex before. Basically what I want is to have a program that you can load a txt file in, have it copy key words, and paste it in a textbox so I can use it later on. So in this text file, there is a bunch of info, but I am only needing a certain part. Here is an example of a text file (actually a .dat file, but is easily read):
[Code]...
how to save information into a text file from runtime VB2005. However, I wish to be able to write the information into any kind of form of file that cannot be simply opened and read by anyone (such as text file can be). Is there anyway that VB2005 can do this?
View 2 RepliesI'm using the SaveFileDialog to save listbox info into a text file. The files save fine, but when you go to save the file, if you hit the cancel button, it will overwrite the previous file you saved, because it's name was the same and it seems to save the previous file as the new name for your next file. Is there any way to catch if the user clicks cancel, and then exiting the sub if they did?
View 2 RepliesI need to be able to change a path inside a document ( a config file to a program) to the current directory of the application im creating in VB so the text file looks something like
Quote:
something=234
blabla=io
ServerRoot=C:Server
i need to change c:server
how I could check if a certain file is in text or binary format?I'm using VB.Net 2008 Express.
View 2 RepliesI created an application that when a user logs onto their Windows account, a Form is displayed outlining the current Computer Usage policy set by the insitution and gives the user two options either Agree or Dis-Agree. The two options are in the form of buttons, with events that depending on what the user clicked, will create a log text file at a specified location, with enteries of Date,Time,CurrentUser, and if they agreed or disagreed. If they agreed the application after creating/amending the file will then terminate, otherwise it will update the file and then force Windows to logoff the current user.
Now I made a shortcut of the .exe of the application and placed it in the startup for all users, and yes the application loads at startup for all the users following the procedures mentioned above. The problem I am facing is, that if the current user logs off, or is forced to log off, and another user logs onto Windows, goes through the whole ordeal mentioned above, the application is denied access to the logfile that was created under the previous user, and thus crashes.
So my question is, how can I created a text file using vb 2008 application, that is accessible by multiple Windows users. I have even tried changing the location of the created file to the shared folder, but the end result is the same.
I know that Deleting a specific line in a sequential text file is impossible but instead copy the needed lines and not copying the unneeded ones to an output file .. killing the old one and renaming the new one with the same.. I can't make this step...
That is my record file
Code:
Input #1, CustomerName, CustomerHomeAddress, CustomerBussAddress, CustomerTel1, CustomerMob1, CustomerID, DateRent, CarRegPin
Code:
"Josek Sam","68 West Land Street","149 Union of States","4524563","45635463","JOSKSAM1",#2009-03-02#,"MILANCGLZ2008"
"Josef Malm","142 Unions Street","64 Hamersters Street","452504","42542054","JOSFMALM2",#2009-03-06#,"MILANCGLZ2008"
"Dave Green","131 Oxford Street","96 BlueBane Route","452542452","43254345","DAVGRN3",#2009-03-07#,"MILANCGLZ2008"
I made a form that when you put your CustomerID in Text3 Box.. it access the records and make some calculations. now.. The customer will return the car.. Then his data should be deleted.. I want to know how to make that when I enter the CustomerID and press on the Command button .. It copies the other lines to a new output folder and doesn't copy these ... So it appears to be deleted using this way..
I've got an application that passes commands to a terminal window and saves all the output to a text file Here is one of the commands my application passes to the terminal
MyProcess.StandardInput.WriteLine("host " + device)
The output of which is
"HostA has address Y.Y.Y.Y"
this along with a whole bunch of other text is saved to a text file...my question is how do I find the sting "HostA has address Y.Y.Y.Y" in that text file and then extract the IP address and assign it as a string variable?
Ok what i want to do is have a user specify a directory when this for is opened and have it remembered everytime this for is open,Also i have a few buttons and whenever the user clicks on one of the buttonsa i want it to open a txt file delete everything in it and write a value that i specify
View 9 RepliesI am trying to import a TAB (NOt comma) delimited text file into a DataGridView. The following code works fine if I have a comma separated file. All I have to do is change the FMT to "Delimited".It just does not work with FMT=TabDelimited. All columns are read into single datatable column. The text file is ANSI text and I have double checked to make sure Tabs are tabs and not spaces, even exported a sample Tab Delimited file from Excel.Can this even be done using Text Driver? [code]
View 2 RepliesI am making a simple application that will be able to store competition data into a text file that I have given a custom extension to on saving. Here is an example of the format that i have saved the data in.
Code:
[Comp_Name]Test Competition[Comp_Name]
[Location]Silverwood Lurgan[Location]
[Type]Teams[Type]
[Code]....
When i open the file, i want to redisplay the data in separate text boxes. Later on in the project i want to be able to search within the file for headings for example;
if "[Heat1]" is present then get all text between [Heat1] and [Heat1]
i am currently able to use the streamreader and open file dialog to retrieve the entire string of text fromthe however i am not sure how to go about getting the text between the headings I have used.
1 List all of the data from Teams.txt in a Listbox. Include suitable headings.
2 List all of the data from Results.txt in the Listbox (use the same Listbox as in 1 above).Include suitable headings. Note that you cannot assume that the file contains onlyresults for the first 3 weeks of the season. Your program should be able to process a results file with more or fewer results.
3 List all of the data from Results.txt in the Listbox. However, in this case the actual team names should be output (your program will need to get this data from Teams.txt. The data should be formatted so that it is aligned correctly. Include suitable headings.
The output might look as follows:
Home Team Away Team Home Team Goals Away Team Goals
Bunbury Braves Nedlands Nodders 5 2
I am using Visual Studio 2008 on Windows XP SP3. User has Windows 7 Pro (32 bit). The IO code below works for me. The read code works for user, but the write code only works for new files. If the user tries to overwrite a current data file, then no data is written to disk. I have done all the usual IO checking (valid file name, etc.) and have excluded it from my same code. In my app, FileSave and FileSaveAs both call WriteDataFile(FullFileName). Any reasons why FIleSave would work on Windows XP, but not on Windows 7 Pro (32 bit)?
Code:
Public Function ReadDataFile(ByVal FullFileName As String) As Integer
' reads a Data file from disk
'
' Format is a text file, with [TAB] seperators and [CR][LF] as line terminators
[code]...
i am trying to make a program that downloads a text file from the internet, the program display/edits it and then it saves it, lastly it uploads it. How can i make it that it downloads a text file and displays and then uploads it.
View 5 RepliesI have a variable (double) that is constantly update in real time with data from an analog input. I would like to write this data as it comes in to a txt file. When I stop my acquisition of data from my analog input, I should have a txt file with all that data stored on my computer wherever I want it. The way I'd like that txt file to be laid out is like so:
Test Title: "This info comes from a string variable"
Operator Name: "This info comes from another string variable"
Test Date: "This info comes from yet another string variable"
[code].....
And so forth. As you can see I would also like to write the time for each data. This depends on my Timer interval which the user can set. The default is 50ms. So by default, y1 y2 y3 would be 0, 50, 100. How would I generate such a text file?
PS: I have five variables (X, Y, strTitle, strName, strDate)
i am working on a project to extract all md5 hash from a text file;btw i don't mean the text file hash i talking abt the hash string inside the file?
View 3 RepliesI'm trying to take items from a list box, add them to an array and then output the array items to a text file using Visual Basic 2008 express.
The number of items in the list is unknown so I can't set the array size to start.
Code:
Dim sWriter as IO.StreamWriter = New IO.StreamWriter("C:file_name.text")
sWriter.WriteLine("Name List")
sWriter.WriteLine(arrayListItem)
[Code].....
I would like to know how to remove part of a text file between two points
For example, say i have a text file that contains:
Code:
START
<LOWER_LINE>
-4.920156 -2.543200 4.277774
[Code].....
I want to write directly to the source file. The files I want to edit are only about 30KB