I'm trying to return a integer / count of the ammount of files in the directory and sub directories in the 'Windows' folder, I need to be able to do this as fast as possible (no lag) and tell when it's done, hope I explained this right.
View 3 RepliesAlright this is what im working with. Im Working with vb.net 2003.I have (X) amount txt files in "C:Marble".In each txt files there are 3 lines.I want to read the first line of each txt file and display them in a listbox. [code] Things i need to Find:
-1 How to tell how many files are in a folder
-2 How to create a loop were it reads the first line of each file in that folder
An application that my company uses stores report files with a .dat extension for use with their software. These files can be opened in notepad and the basic report information can be seen as text. I am attempting to write an app that opens and reads data from these .dat files and displays it in a checked listbox. My hangup thus far is that I can't figure out how to read the data from the .dat files since they are not .txt files. Can anyone point me in the right direction?
[Code]...
have just started vb .net and im working with the 2005 edition, but i would now like to make a program that i can use at home that will alter files names,Bassically where i rip cd's to put them onto my mp3 player they are always given a name starting with 01. etc, what i would like is a small bit of code that uses a while or for loop to go through every file in the folder and remove the first three characters.
View 4 RepliesI wrote a cleanup program to go through some directories and delete files based on if the creation date is older than say 6 months. It works fine with some of the directories I have that contain around a few thousand small files. However, there is one directory (that contains small backup files from another program) that is loaded with over 300,000 files and it locks up on me as soon as I read in the first file in that directory.I am convinced it is the directory has too many files in it to open it. The server that the directory is on is slow. It takes a half hour to open the directory while on the server itself. I know it will take forever to delete the amount of files I want to delete, but I don't understand why it gets stuck and hangs there with no error message.Here is where I get stuck. Listbox1 is the directory I'm attempting to access
For Each selectFile In My.Computer.FileSystem.GetFiles(ListBox1.Items.Item(Count), FileIO.SearchOption.SearchTopLevelOnly, "*.*")
compFile = Path.GetFileName(selectFile)
[code].....
I require some help in saving and reading files in Line by Line format, How would I save to a specific line in the text file, or read a specific line?
[Code]...
I am writing an application that connects to a specific com port. This com port can change depending on how many physical ports are on the PC, and if other USB devices have installed com ports before this one.
I have the communication to the com port all working great, but I need to get the com port description not just the "COM#" which is all I currently get.
I found in the registry where the description is stored but am having trouble doing what I need.
In this key:
Code:
HKEY_LOCAL_MACHINESYSTEMControlSet001ControlClass{4D36E978-E325-11CE-BFC1-08002BE10318}
there is a varied number of sub keys. The are numbered 0000-NNNN depending on how many ports you have. Inside each of these keys, there are multiple values, although I am only interested in one or 2 of them.
My problem is, that I do not know how to get a list of the subkeys (the 0000-NNNN keys/folders) from the original key I posted. I have looked through a few registry tutorials, and I can view the default value in the listed key, but I could not find how to list the subkeys of the listed key.
Does anyone have any sample code they could share that shows how I can get a listing of subkeys, and then run through those subkeys checking for a specific value in one of the strings contained in the subkey?
I am using VB.net 2008 and Windows XP.
I make an application and make setup file using VS setup project. This work fine and create default text files into Program Files Folder for winodw 7/vista .but can not modify these files or create any new files.
There are few text files need to create ,modify during application running ,but in windows 7/vista unable to create,modify files.I am using full default admin right for these OS. If iuse C: root path then application work fine or for win XP no problem.I think UAC restricting to perform these opeartion. But i do not know how to change these restriction using vb.net, whenever application start.
I found one solution that , if change user rights manually then this problem solved.Follow these step to change your account settings.Control Panel-->User Accounts and Family Safety-->User Accounts-->Change User Account Control settings-->Never notify(Set tab to never notify).After this change need to restart system.Now can make all changes like windows XP into Windows 7.can also make changes into program files.
Its working fine, but need to make these changes manually in OS.but its not efficent solution. So if any one knows how can make these changes by coding that will nice.
I have the following code to read values in the ABCInstall folder inside SOFTWARE sub key of which is under HKEY_LOCAL_MACHINE.
This works fine in Windows XP but not in Windows 7. make it work in both XP and Windows 7?
Dim Key As RegistryKey = Registry.LocalMachine.OpenSubKey _
("SOFTWARE\ABCInstall", False)
Dim SubKeyNames() As String = Key.GetSubKeyNames()
[Code].....
how can i read all the files in history folder??? i tried thi but all i get is index.dat
[Code]....
Ok I know this question has been asked to death but I still have not seen a good answer. I have created an application in VS2010 using VB.NET. In my application I have an error log that is an XML file located in the Public gstLocalErrorLogLocation As String = Application.StartupPath & "ErrorLog"that gets written to in the event of an error so I can trouble shoot application easier. My application also downloads files from our FTP site and puts the files in Public gstLocalDownloadLocation As String = Application.StartupPath & "download"So I have files that get read and written to as well and created and deleted all in the Application.StartupPath which is either "c:Program Files(Application Directory)(Some Directory)(Some File)" or "c:Program Files (x86)(Application Directory)(Some Directory)(Some File)" depending on 32bit or 64bit Windows 7.
After creating the setup I install it on my test machine that have both Windows 7 32bit and 64bit.Everything in the application works great till I have to write to, delete or creat a file in those directories above. I know it is an access issue and the UAC. This will get installed on numerous systems so the options I have seen to change file or folder permission on the computers manually is not an option.What has to happen is after I install the application it just works like when you install it on XP. Some post have suggested that you us a user with administrator privilages or group which is all fine and dandy but the user I have used to test the application has all of that.
So what I am asking is how do you create an application with VS2010 in VB.NET that after creating a setup package and installing on Windows 7 will just work with out "Access to the path c:Program Files(Application Directory)(Some Directory)(Some File) is denied." If I have to install this on 100 Windows 7 computers it has to be a concreate no manually doing anything just install and work like when we installed on XP.
I need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know:
1. how to open a new file
2. how to specify the record length
3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
how should i copy a file in system32 folder from resources folder .resx file of my windows application?
View 1 RepliesI am trying to read all the attributes, there are 3, from a single node. This is what I tried from an example I found:
Code:
Dim xl As New XmlDocument
xl.Load(XMLfile)
Dim rn As XmlNode = xl.SelectSingleNode("p1")
[code]....
I have used a messagebox to show the xl.OuterXml, I see the file is loaded.
friend of mine has no HTML knowledge so I'm attempting to write a program that replaces certain parts of a html file to suit his needs.I've edited the HTML file and marked certain parts with "tags" like this:
#IMAGEURL1# I have a textbox where he can copy + paste an image URL and hopefully the #IMAGEURL1# is replaced with the contents of the textbox.
So can someone please enlighten me to-as how to open a HTML file (there's no textbox to display the contents just yet, I'll add one if needed), find the specified text and then replace it with whats in a textbox.
I am trying to import a TAB (NOt comma) delimited text file into a DataGridView. The following code works fine if I have a comma separated file. All I have to do is change the FMT to "Delimited".It just does not work with FMT=TabDelimited. All columns are read into single datatable column. The text file is ANSI text and I have double checked to make sure Tabs are tabs and not spaces, even exported a sample Tab Delimited file from Excel.Can this even be done using Text Driver? [code]
View 2 RepliesI wrote a program to download and play AVI files the files are large in size and long time wise. I have the files playing as they are being downloaded but i can't see how long the file is or seek reliably. i was reading that the AVI headers are in the last 512kb of the AVI file *why would't they put it at the start* lol so my question is is there a way to download the last 512Kb of the file i'm downloading. i have the Bytes Read and Length of the file while its downlaoding i'm just not sure where to go from there, or how to do it atleast. If i had the length in time of the Avi file i could set the trackbar to be able to seek properly. or if someone has an idea how i could get the time of the video by using fps and some math i could prob do it that way too but idk how i would tell how i can find how many kb are in the fps i'm sure it changes so think that way is't going to be reliable. how to get the last 512kb would be the best option not sure if it can be done even.
View 4 RepliesI am wanting to get a complete file/folder listing and then copy these files to another folder.
Here is my
[Code]...
This happens on many folders. How can I get a listing of these folders and also copy these files?
I want to read 'File.ini' line by line checking if specific text exists in the file and then display on a windows form weather particular settings are turned on or off.So far this code works if "TargetText" exists but if it doenst I get an error on the code line: "If line.Contains("TargetText") Then".
Code:
Using z As System.IO.StreamReader = New System.IO.StreamReader(File.ini")
Dim line As String
' Read first line.
[code]....
It works if "TargetText" exists in a line in the file but if it doesnt exist I get the 'Null Reference Exception. Object reference not set to an instance of an object.'
I'm trying to read multiple values from a registry subkey in the CurrentUser key. I need to display these values in a listbox with multiple lines. I so far can only get one of the values from the subkey. I know (or at least I think I know) that I need to list the values in a string (with a possible loop), and then just display the string to the listbox. The subkey is the TypedURLs under CurrentUserSoftwareMicrosoftInternet Explorer Typed URLs. Here is my code I have so far (I did a year of basic VB as part of my Uni course).[code]
View 4 RepliesI'm new to Visual Basic. I'm trying to get this code to read a .txt file line by line. If the only thing that the line says is "B" it should add one to the intTotalBoys integer and so on with G for Girls, F for Fathers, and M for Mothers. I'm not sure why it won't work. [code]
View 4 RepliesI would like to read from file, and ignore lines that start with --. I know how to read line by line but i just need to ignore those lines.
View 3 RepliesSo I need to write out an object to a text file as well as read in objects from text files.How do I accomplish this? This is the code i've used to read and write just simple lines of text. Is there a small modification to this or just a different function i use to read in an entire object?
Code:
Dim path As String
path = "Security.txt"
[code].....
I have just recently been using VB 2010 after using VB5. I have noticed a lot of changes. The problem I have is that I wish to open and save text files to and from arrays in the background. I've attached what I would do in VB5. I have searched around, but all the examples I find use a Textbox instead of an array. Can anyone show me how I can do this with VB 2010?
View 1 RepliesI want to be able to able to read the dimensions of a TIF image without loading the entire file.
PS Using Visual Basic 2008 on Vista64.
I want to search a directory and get all the names of the "Folders" within that directory and place them into a string array. Note: No Files just folders
View 3 RepliesOk so i have a program that pulls up all the video files in a video folder. I need a code that will move one of the files in the listbox to a recycle bin i made. But i dont want to replace any of the files in the recycle bin i just want a code to move one file out of one folder and into another. So if there is a code for this then great.
View 2 RepliesI have a txt file, that i want to read into my program. The problem is this:The textfile is a stats file for a game and looks like this:
Code:
ip:port wins username points
ip:port wins username points
ip:port wins username points
ip:port wins username points
ip:port wins username points
etc.
The main thing i want to do is sort these things out and then add to mysql database table that would have these columns:
Code:
ip authid wins username points
So what i wanna do is splitting this textfile data up and then adding everything to a mysql table.
I want to save a bitmap object to file, but I want to make sure the file path is writeable first. The user should have write permissions to the folder and it should not be a location on a CD drive.Right now, it gives a "A generic error occurred in GDI+", which is not too helpful. I'd rather tell the user that the selected save location is not writeable.
View 6 RepliesI am making a file program that will store information that a user can not edit without using my file system. The only two ways I can see how to do this is to either create an invisible folder to hold the files, or make my own extension. I think it would be easier to create an invisible folder through VB if possible. Can anyone point me in the right direction.
View 10 Replies