[URL] some properties aren't showing in my vb just like the one needed in the video..my computed column is made only by
-project
-add new item
-dataset
then i just changed the expression property
I have a manually created a dataset (dsPickingList) that I add data too as the user inputs data on a form. There is a datagridview on my form of which it's datasource is set to dsPickingList.What I would like to do is spot if a user deleteds a row from the datagridview and update the dataset (dsPickingList) as it is ultimatly this dataset that is stored to the db and printed, not the DataGridView.[code]This is why I need the action from the DataGridView to update the dataset
View 1 RepliesIn previous versions (VB.NET 2003) I would do
datagrid.datasource = dataset.tables(0)
datagrid.datamember = "Column1" 'Where this is the name of the column
This would show me just that column in the grid regardless of the number of columns in the dataset.
In VB.NET 2008 I do: datagridview1.datasource = dataset.tables(0)
I see all the columns.I then add:
datagridview1.datamember = "Column1" 'Where Column1 is the column name
I then have an empty grid.How does one get only a single column to show in the grid from a multi-column data source? I am using internal code to populate the datasets and tables.
I have two database tables in SQL Server Express 2008 with the following layouts.
DATA
-------
id
fundKey
amount
fiscalYear
FUNDS
-------
fundKey
fundDescription[code]....
These two tables are related on fiscalYear and fundKey. So if you were to look at the first line in the DATA table you would get:
1,General,2700,2008
I'm trying to create a front-end for this using VB2008. I thought a DataGridView (DGV) would work well for this. So I create a small app to test out my theory. I put a DGV on it and setup a data source to the DATA table using the designer and it works great. Then I change the fundKey column to be databound to the FUNDS column, looking up the fundDescription based on the fundKey. I also change it to a combobox column because in the future I would like other users to easily change the value. And all of this works well.My problem is in that combobox column, all the fund values are listed as options.So it lists: General, Indirect, General, Sponsored. I would like it to list only the values for the appropriate fiscal year. So if that row is for fiscalYear 2008, the fund options should be General and Indirect. And if it's 2009 the options should be General and Sponsored.What is the best way to do this? I thought about setting up views on the SQL Server side and having two datasets in the app and switching between them.
I have a datagridview with a datasource from a MySQL query. Works fine. However, I want to add an extra column and generate some data into the cells. This works fine too and shows up as intended. However, I cannot sort on that extra column and the contents of the cells in the column are cleared out if I sort on the other colums. I realize this is all because of the original datasource, but Im hoping there is a way to "connect" the extra column in somehow?
Grid_SearcherResults.DataSource = dbconnection.bSource
Grid_SearcherResults.Columns.Add("Location", "Location")
'Then some code to set the value of the cells in the new column.. etc
i have two datragridviewcomboboxcolumn,and two textbox column in a datagridview.each combobox column is binded to separate binding source.
column names are sl_no,col_empname,col_empworktype,Col_Hours etc.and
displaymember,datapropertyname,valuemember and for comboxcolumn are
col_empname:-emp_name,emp_id,emp_id
col_empworktype:-worktypename,worktypeid,worktypeid
[Code]...
I'm trying to display all services on a computer into column 1 under Processes and column 2 as services. I can't figure out how to do this with the WMI statements.
Here is my code......
Private Sub OKButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OKButton.Click
[CODE]..................................
I have a datagrid adding items for selling. The total for each row is calculated on the price, qty and discount. This goes into rowTotal column. Below the grid, there are 2 textboxes, one for txtBoxVAT and txtBoxSumTotal. Now I want to add the column 'rowTotal' into txtBoxSumTotal. How to achieve this.kesk
View 2 RepliesI am making a combobox from my data source. Basically, This is a projects form and the user needs to select the the primary contact which is contrained by the customer id (GETbyCustomerID) set in another field. I have it working... mostly except the combobox only displays the contact ID which is completely useless to the user. I need to know how to display the First and Last name (both are seperate columns in the table).
View 1 RepliesBinding Master Table to TextBox and DateTimePicker and Binding Details Tables to Datagridview then Add / Update / Delete in both
View 8 Repliesi am doing a small project for my business and i got stuck with this 2 weeks ago and still no progress.
I have an access db table "store" that has columns: (filldate,brand,model,plateno,mileage,litres) where i am storing these info each time a car in my company fills gas. For example (8/25/2011,Renault,Megane,5487844,3943,20).
What i want to do now is to display in a datagrid the total consumption of gas (litres) with the kilometers driven (mileage) between 2 dates.
i have a datagridview on a form which contains studentname (in alphabetical order) and a blank rollno field according to the particular class.Now what i m suppose to do is to assign roll no on button click, starting from first student to last student.
Roll no is like 11DCE001...For eg:-
Roll No StudentName
11DCE001 A
[code]....
I'm writing a help application for the Customer support team at my company to help agents ask better questions when customers report problems. In it, I've got a SQL database that contains all the products, topics, and questions. The layout is similar to the following:
Products Table:
Product_ID Product Name:
Topics Table:
Topic_ID Product_ID Topic
[code]....
I don't know if I'm making myself clear, but I basically need to do the equivalent to the following SQL statement: "SELECT PRODUCT_ID FROM Products WHERE PRODUCT_Name = LstProducts.SelectedValue"
I have a form with a binding navigator on it. It also has a DGV and text boxes bound by the binding navigator. Everything works fine. If you scroll through the row's in the binding navigator it updates the DGV and text boxes at the same time. And also if you click any row in the DGV it automatically updates the text boxes.
Ideally I want to impletment some validation to make sure the users are not only filling in all the required text boxes but also that the data entered is correct.
I have some validation setup in SQL, for example not allowing nulls on particular columns but I really need to be more extensive in the validation than that.
Ideally I need some way of validating the current row selected whether it's an existing row or a new one, before moving to the next row or before save is clicked on the binding navigator. Firstly because the SQL validation messages are not very good, secondly because whilst the data may meet SQL's requirments, it may not be right. For example SQL might accept 12:00 as a time but the program specification requires the user to input within a certain time frame, i.e. 14:00 - 16:00.
Finally, I feel like the validation needs to be handled immediatly on the record that is displayed as ultimatley, the way the form is setup, allows the user to add and amend more than one record at once and if the validation was handled on 4 or 5 different rows then it would bring another problem of having to bring each row up to correct. Therefore I think the best aproach is to handle each row before allowing the user to move onto another one.
How to add a checkbox column at first column of datagridview including column header?After adding, how to code to "check all" or "uncheck all"?
View 27 RepliesI want to bind a column of a strongly typed dataset to a combobox. But the problem is i have to get only the distinct values from the column and also when a user inserts a value into that column the new value should be showned in the combobox at the same time.And also i want to make the first row of the combobox to be unselectable..[code]how to make this column distinct values
View 1 RepliesI'm new to programming and am trying to learn how to developed data driven application and was wondering which method is recommended? I know there are some debates out there but most of the books I have recommend using object binding, but it doesn't offer any concrete information on how to implement it. I went to MSDN and most, if not all, the documentations are on dataset. So I guess my questions is, object vs dataset, which do you use?
View 9 RepliesI have text box which I use the properties window, datasource set to bindigsource1 in my dataset.. I want to trim the text that is being populated.. Is there a wayt o do this through the visual studio gui or is it redo in codebehind?
View 1 RepliesI need to add rows to a DataSet using databound controls in VB.net. I've set up the data bindings themselves, they're bound the the correct controls, and the BindingSource uses the correct DataSet. The DataSet is filled from the DataAdapter correctly, and the binding source works, as the navigation controls all work fine. How do I use the controls to add new data to the DataSet? I guess there must be some kind of end-edit involved which would enable me to insert, update and delete records in the DataSet (as you would use with DataGridViews)
View 1 RepliesI have a typed dataset with 2 tables and a relation between the 2 tables. The relation is a 1 to 1 relation.First, who cane help me how to bind both the fields of the parent and the child table to a textbox.And second, in the dataset designer you cane preview the data. There a see for each record 1 row with all fields of the parent and also the fields of the child table. How cane i have the same result in a datagridview?
View 1 RepliesI have a problem binding a radiobuttongroup to a dataset/datasetbindingsource. I have a field - among many others - in the dataset, holding int values 1-6 All fields are shown in textboxes on the windows form. But how do I make the radiobuttongroup show the value of the int field. value=2 => radiobutton2 is selected
View 1 RepliesCan you please explain me and/or show some good tutorials how to do it?It seems pretty complicated because visual studio usually does it all for you and that made me stupid and not to do anything about it.Things I don't know to do in code but I know VS does it for me:
[Code]...
I'm sure there is a good tutorial somewhere on the internet. I'm okay with doing it with designer, but now when I have a situation where I can't use MDI container but tabcontrol.Other solution would be to make a MDI container out of tabcontrol. Is it posible or only other form can be MDI container.
[Code]...
Above is the code i use to retrieve information out from my database. Column Commissionable will return either '0' or '1'. how is it possible that when i bind it into the datagridview, Column "Commissionable" is set as a datagridviewCheckBox have 0 as 'Unchecked', and 1 as 'Checked'
Add persistence to multible DataGridView in terms of Hide/Show column and column width
View 1 RepliesIt seems that on clicking datagridview column header, the column will be automatically sorted based on the column type. I have a column showing some numbers. If column type is string, it sorts "1","20","3" into "1","20","3". If column type is double, it sorts into "1","3","20" which is the result that I want. However, there might be some erros in the numbers and error messages(text) will show in the cell instead of numbers. So I cannot set the column type as double. I want to ignore these error messages and sort all the numbers. How can I do this?
Also, I need to add some background colors to different rows in datagridview. So in the column header click event, I call the bkgColor Sub to achieve this. My question is that how can I override the sorting method in this event?
Private Sub DataGridView1_ColumnHeaderMouseClick(sender As Object, e As System.Windows.Forms.DataGridViewCellMouseEventArgs) Handles DataGridView1.ColumnHeaderMouseClick
Try
[code]....
i have a datagridview with three columns. i set the first column to visible=false, so the user can only see two columns.when the user presses the tab key in the first visible column -- column(1), i want to ignore column(2) so that the user only tabs through the rows in column(1)i can't get it to work. it will always tabs through the rows in column(2) even if i use the column name.
[code]...
I want to disable column in datagridview so the column will not receive focus,
when user press tab to move from cell to cell this column will be skipped and the focus move to the next cell or column.
In my window application i have taken one combobox field with its collection as "amc", "war" etc. Now in my datagridview this combobox column is display as Textbox column, i want to change it to combobox with the above collection "amc","war". I have retreiving the result in datagrid through sql query, hence in datagrid edit column section we doesnot have that part to change to Combobox column.
View 1 Repliesin my window application i have taken one combobox column with its collection as "amc", "war" etc.Now in my datagridview this combobox column is display as Textbox column, i want to change it to combobox with the above collection "amc","war".
I have retreiving the result in datagrid through sql query, hence in datagrid edit column section we doesnot have that part to change to Combobox column.
I have:
- Table1 with columns: PK_ID1, LOCATION, DIRECTOR, SELLER, SELLERID, WORKTIME (relationship), WORKCODE
- Table2 with columns: PK_ID2, WORKCODE (relationship) & WORK_DESCRIPTION
My DataGridView do a SELECT * FROM Table1;How can I replace WORKCODE with WORK_DESCRIPTION in DataGridView, please?