i have 12 button and 12 panel hooked at this button.but sometime after i clicked this button,that panel not at position i want.So, how to locate this panel for good looking and at position i want? to left,up and down.tq for your help.
View 3 RepliesI have already done the creation of button and the dragging of button at runtime already. But now i need to know how do i save the last dragged button on the form and also detect the name of the last clicked button.
i now drag a button to coordinates 25,254. so when i exit the form and the next time i launch it, the button will still be at 25,254. and this one will go on for the number of button i created like 100. so when i launch the form the 100 button will be at the exact position where i last saved them. the second part is lets say i created button1 and button2 on the form in runtime. so when i clicked the first button, it should display button1. and if i clicked on button 2, it should say button2. same goes for like 100buttons.
[Code]...
I have trying to do an elevator simulator, wich have to includo the panel with the floor, available floors, and a button panel with available floors and button up, down, but I dont understand is how to use the timers for up and down, because I vague idea to select the floors is to usea a for or select case but I dont know wich one is the most appropiate in this case. Wha tI have so far is:
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
Timer2.Enabled = False
If lbl1.Text = "4" Then
lbl1.Text = "1"
[CODE]...
This just shows the levels and the timer1 just go up and a little "screen" shows at what floors is the elevator but this just go up and start from one again.
How to locate a button based on the handphone number or any number? That means if I assign the button to coordinates 25, 14 and number 1 as the button name. So when i key in 1 in the text box, only that button will light up the rest wont. So that means the statement will be like:
if textbox1.text = "01" then
' button at 25,14 backcolor = black
end if
Below is is an HTML form and below that, is a vb procedure, "LoginExamp" that enters in the username and password. I am unable to locate the button however and click it since it does not seem to show up as a mshtml.HTMLInputElement. "htmlInput.click()" never runs. How can I adjust the loginExamp code so that the button is clicked.
<form id="loginform" name="loginform" method="post" action="">
<input id="username" class="formfield" type="text" value="User Name" maxlength="40" name="Xusername">
<input id="password" class="formfield" type="password" onfocus="clearDefault(this)" maxlength="40" name="Xpassword">
<button class="subButton" onclick="javascript: submitform()">submit!</button>
[code]....
how to move button over a panel from the form in which the button is created dynamically at run-time ?
View 1 RepliesI need to center the red panel in the middle of the dark grey panel, when you resize the form the red panel should be in the middle, and the red panel can't be resize, anyone have a code or property to do this?
View 2 Repliesim trying to create a panel thats hidden untill a button is pushed, it will expand the form automatically to fit the panel inside. the only way i can really describe is a image.
View 3 RepliesI am currently working on a web browser using visual basic and i think i am stuck at this point where i have a panel and i need to scroll it when mouse hovers a button .. actually if i can find how to scroll the panel without using the scroll bar , i think i can modify it for using it with mouse hover. [code]...
View 5 RepliesI am currently working on a web browser using visual basic and i think i am stuck at this point where i have a panel and i need to scroll it when mouse hovers a button .. actually if i can find how to scroll the panel without using the scroll bar , i think i can modify it for using it with mouse hover.
View 3 RepliesIam a beginner to vb.i have a project work,related to Quotation software.i want to know how to unload all forms that are loaded on to a panel when clicking a Button.here i did some codes, in that, one error is displaying like "Collection was modified; enumeration operation may not execute." the code is given below:[code]
View 1 RepliesThis should probably be a different topic, but the reason I was cutting/pasting is that I have a split panel form. I dock a toolstrip to the top of one panel, and then add a datagridview control. I set it to dock to parent, and it does, but goes under the toolstrip, hiding the top of the grid and scrollbar. Not acceptable of course. Is there a setting that I'm missing?
View 2 Repliesi want the panel to center itself evertime i change the size of the window. how do i do it? panel1.location.x=form1.location.x doesent work.
View 1 RepliesIs there a way to hide the scroll bars on a VB.Net panel? We have written code to allow the user to scroll using a touch screen and do not need to see the scroll bar. I know it has to be there for the scrolling to work, but would like to hide it from view.
View 3 Replieshow to insert a collapsible panel in forms??? i need to create a simple quiz application, so that i want a panel.
View 2 RepliesHow can I have a new Panel load with a Button click.
View 1 RepliesI'm currently trying to make a beat generator, which allows you to add several labels (boxes) onto a panel, and then sound will be played when the "play slider" reaches the same x-value. However, i can't make the slider find the boxes. OK, so this is what I've got so far! Clicking my button, a label named sound0, sound1, sound2 is added to my panel_back (which is the background of the player) Private Sub btn_addkick_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btn_addkick.Click
[Code]....
how to clear lines drawn on a panel.on some event i want to clear lines which r previosly drawn
View 3 RepliesWhen I want to create a new panel at run time when I clicked a radio button it displays an exception at panel2.location.
Dim panel2 As Panel
Private Sub RadioButton5_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RadioButton5.CheckedChanged
panel2.Visible = True
panel2.Location = New Point(200, 300)
panel2.Size = New Size(200, 300)
Me.Controls.Add(panel2)
I am working on a small game, Moon Lander and I figured how to make rocket falling from the top of the panel which is on the form. I want to have fuel burning feature so I can land rocket properly on the bottom of the panel.[code]If anyone knows how to burn fuel (minus the gravity) so rocket starts to slow down, and eventually stop, then rise up,
View 2 RepliesI am using a textbox which handle the name of the employee and when it get focus i am using a listview with detail view which shows all available employees and user have to select any of them. I am using all this control in a panel, unfortunately listview need more size then panel, and i cannot increase the size of panel. But placing listview inside the panel make its child control and hide the half list view. Is there any way that i can show full list view control under the textbox?
View 2 RepliesI'm having a hard time getting this code to work, here's the code, I'm trying to open an instance of explorer.exe in a vb.net panel. Imports System.Runtime.InteropServices
[Code]...
I use drag'n'drop from a datagridview to a panel. The panel holds an array of objects (think rows) so that the items from the datagridview can be dragged to the different objects. I use the y-index from the top of the panel to define what object the item is dragged onto.This works great as long as the object is visible from the start. However, if I scroll down to an object and then drag the item from the dgv, it gets released on the wrong object, as the y-index doesn't take into account the number of pixels I scrolled down. So, what I need is (if it exists) the scroll offset property for the panel, i.e., the number of pixels that I scrolled down. (Then I can add this offset integer to the y coordinate on which the user drops his/her object.)
View 5 RepliesI have two panels, and I want them to both scroll horizontally with one scroll bar, but I only want one of them to scroll vertically. So if I have a large panel on autoscroll, it works fine for that panel, but I have another smaller panel above that, could I make the smaller panel scroll horizontally with the larger panel's horizontal scrollbar?
View 2 RepliesI'm doing a research/project at school and I'm baffled with some problems. I already integrated some features of speech recognition using the Speech Recognition Object Library and using some Speech Recognition Library Scripts. Now the problem is I'm having trouble on how to add the whole speech recognition control panel on my form. (if not the whole control panel some features of it like adding new profile and training.) I'm using windows 7 ultimate edition and visual studio 2008 professional.
[Code]...
im trying to get my from to have a flow panel that shows all open forms and it has to refresh its self when a form open or closes. Ive already kind of done this but im sure theirs a much better way to do it.
The Code im using at the moment is:
Private Sub formcheck_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles formcheck.Tick
Dim formTitles As New Collection
[Code]....
I want to create forms with panel opacity, but this is not possible. Panel's don't have an opacity option and making the entire form transparent, makes everything you put into it just as transparent.
[Code]...
Does anyone know how to create a control similar to the screen shot below (CCleaner). It appears to be panel with a scroll bar and button to control what panel is shown any ideas?
View 5 Repliesnot quite sure why this is happening but I am just debugging right now and the buttons I am using are opening the wrong forms, I have made sure of the form names, button names etc and it looks all good but specifically the btnPrintReport is opening up the form enterAuditForm while btnProcessAudit is opening printAuditForm instead of their correct ones.
Here's my code, it is rather simple. The reason why I am using a separate sub as my btnPrintReport is because I am using that also on the baseForm's OnLoad Event, which again is also opening the wrong form.
[Code]...
I thought this would be easy but for some reason it's giving me a rough time. I have a windows form with three equal size panels on it. Each panel takes up about 1/3 of the window width, less some inter-panel spacing.
The effect I want is if the user stretches or shrinks the form the panels maintain their relative 1/3 width and spacing, similar to how divs on an html page would size as the browser window is sized.
So I anchored the left panel to left, top and bottom, the center panel to top and bottom, and the right panel to top, bottom and right. This works fine in keeping the left and right panel anchored to their respective sides, and all panels now stretch with a form height change.
So in form resize I adjust the width of each panel to form.width/3. As expected this is close but does not account for the inter-panel margins I want to preserve and the form border width.
I played around with various constants and noting I do gives me the desired effect.I'm sure there is a pretty straight forward solution to this but I can't seem to find it.