I Have a textBox on a form to give me my IP address (but I have 3 anwser's going into 1 textBox) When I use a button to revile The anwser's,all in one Textbox .How can I seperate Each anwser's with a space. Code Below: (TextBox5 is the TextBox I need to seperate the Answers) [code]
View 12 RepliesI'm using Visual Basic Express 2010. I have the prompt, the textbox and the calculate button. For the answer do I have to make a separate label for the answer in seconds and the actual response "That will take (separate label for answer) seconds" I made a click event button and assigned the following as global variables at the start of the form:
Const intSpeed As Integer = 1207
Const intTime As Integer = 3600
Then I made a click event for the button. I don't know what the formula is. Basically the user inputs a distance in the box, the calculate button tells you how long it will take for the vehicle to travel that distance in seconds.
Here's the interface: [URL]
Criteria:
Are We There Yet?
The Thrust SSC, a super fast vehicle tracked at 1207 Km per hour (750 mph) was clocked on the Black Rock desert back in 1977. Build an application that will tell people how many seconds it would take to get to their destination if they were driving the vehicle. Of course this doesn't include having to stop for stop signs, travel through school zones, or slow down for corners.
You need to include the following:
1.) Design the application with a prompt label and textbox to collect the distance from the user.
2.) A calculate time button
3.) The form must have the text property changed to read "Are we there yet?"
4.) The objects must have both the Text property and Name property changed to an appropriate value.
5.) A constant global variable should be used to represent speed of the vehicle.
6.) A constant global variable should be used for seconds (there are 3600 seconds in an hour)
8.) A local Dim variable declaration can be used within the button click to hold the distance value.
7.) Variables should be declared with the most appropriate data types.
8.) Include a "Text Changed" event to reset the time in seconds to a blank value when the user starts entering in a new distance.
9.) Comment code should be included
I have a few forms that have a lot of really intensive updating along with a great deal of user interface (text boxes, button clicking etc) Is it possible to open a separate form as a separate UI thread from the start up form that called it to "show" or open or whatever the new method might be?
View 6 RepliesI am creating a program that shows two random numbers on two separate labels then I have to add / subtract them and the answer should be entered in a textbox
How can I add or subtract the numbers and enter the answer on a textbox?
I am creating it in Visual Basic Windows Forms Application
What is the advantage of using a text box to display an answer in Visual Basic versus a label?
View 2 Replies1) I still don't know how to link how to link form 1 and form 2...(can we link or NOT??)
2) How to create button erase the answer in form?
3) How to link micrososft access n vbnet?
4) How to create button next n go to the next form?(ex: from form 1 to form 2).
If I have a textbox, and I want to generate some paragraph into it, it makes sense I will want to use linebreaks.
View 2 RepliesWithout using a variable.i tried the [code]this code does not work it just change the text of the textbox2 but not the textbox1.
View 18 RepliesI have a textbox where the user inputs a string.
I want to take the string, and output each character into a seperate textbox.[code]...
How do i load the Main form of a WPF so that a seperate thread goes and gets data from the database while the form is in an apartmentstate? (drag-able / movable) I Know this is possible with opening a new window from your main form like this :
Private Sub openOrderWindow()
Dim OrderWindow As Orders = New Orders
OrderWindow.ShowDialog()
End Sub
[code]....
I've tried putting MyBase.ShowDialog() and .Show() and .9000+ other things The only benefit I've got out of using a seperate thread to load from the databse is i can see the screen right away (as oppose to it being a transparent box until it loads) but i cannot move it around or minimize it?is there any way to make it Movable while it loads?
I have a program where a user puts a string into a textbox, and then character one goes into Textbox1, char2 goes into TB2, char3 goes into TB3, etc. I have a For loop that gets all of my textboxes that are used for this, and I have my for loop that is supposed to go through my string character by character.
[Code]...
[code]...It is a multiline textbox, and I want to be able to enter different pieces of information (info1, info2, info3) into each line.
View 16 Repliesi want to seperate textbox characters every 4 characters. like this:
regular text =
1234567812345678
filtered text:
[code]....
I need to out each line of text to a seperate textbox. or label. Im not sure about a string. Can a string hold a value like, "192.168.1.1 2302"? If so, then how would i output it to a string. If not, textbox or label please. Please keep it simple as possible, since I will probably be needing to repeat this process 500 times, like, a different string for each line, i will have a lot of lines. Dont care about the textbox limit, as long as all the lines are outputted to each textbox.[code]
View 15 RepliesI am having problems with creating this change problem. The idea is that the user puts the amount of money in the textbox and then in separate textboxes shows Dollars, Quarters, Dimes, Nickles and Pennies.
Example:
You Money: 12.54
Dollars: 12
Quarters: 2
Dimes: 0
Nickles: 0
Pennies: 4
Here is the code I have so far:
CODE:
I have to create a textbox which will list down one column of datas from textfile which is separate by delimiters.But as I have to filter alt.Row from the text file, what can i do?
View 9 RepliesI created a telephone number form where the user enters the telephone number in a text box as (nnn) nnn-nnnn. The first 3 digits in parenthesis are the ISD code, the next three are the area code and the last four are the local number. I need to separate out these three fields of the phone number and display in three separate text boxes labeled appropriately. Now, suppose the user enters the phone number in a text box as a continuous string of 10 digits, where the first three represent the ISD code, the next three represent the area code and the last four represent the local number. I'm lost as how to change this string into the form (nnn) nnn-nnnn. This is what I have
[code]...
I have a TabControl object on my form with many tabs created in code (TabPages) and my problem is that the same objects that are in the initial TabPage needs to be in the other TabPages created in code, I have this done in code when the user clicks the 'New Tab' menu option, however the same code is used for any new tabs created. The problem created here is that I have an event against one of the objects that appear in the other TabPages, but because the same code is used to create any new tab pages, the event will only work on the newest tab page, if that makes sense? By the way these objects that appear on the other TabPages are properties at the top so events can be handled against them in the respective subroutine.
[Code]...
I'll get straight to my problem - I'm currently coding in Visual Studio.I have a table (countries) with the columns ID | Name. The table is filled with around 28 records.I also have a form with 4 combo boxes (set up as 1,2,3 & 4) that I want the user to select. These combo boxes will display the names from the table countries. I then want to use the selected names in the combo boxes to Insert into their corresponding ID into another table. For example England would have the ID 1, USA the ID 2 etc.So, is it possible to have separate combo boxes that will give separate ID values but using the same table? At the moment I can't seem to find a solution.Eventually the form will have more than 4 combo boxes so I don't want to use separate bindingsources for each combo box.
View 5 RepliesIn an application with multitab on a user Form after collecting some information I will plug it into an access database and collect data and disply it with another "Second" User form.On the second user form I make a selection from 1-10 selection on the second user form, and again I will read the access database using the selected data by the user and would like to plug in to the First user form and close second user form.Somehow my textfield is not accessible and I get the yellow tip of "PLName is not member of 'Windows.System.Forms.Form'"[code]
View 4 RepliesI have a windows form with a textbox bound to a data table and a PDF Viewer both in the same form. I could change the text on the textbox and the Viewer would show whatever is linked to the textbox. I am trying to create a separate form to put the viewer in but at a loss on how to link it to the textbox on the first form.
View 4 RepliesI would like my application to do something (in one form) and while form is doing that i would like to show another form to the user. Code is:
Private Sub blaa()
Dim a As New Working() 'working is another form
a.Show()
'Do some stuff
a.Close()
End Sub
But when i make new form i find it is on the same (main thread) and therefore new form also frozes. How to make new form on separate thread?
In a project I'm working on, I have 3 separate mazes, a Splash Screen, and a Module for my global variable(gWin, to detect wins on the mazes). When you finish a maze, I'd like to get it so that it does not allow you to go back and redo a maze, to prevent cheating as I want a final screen to appear when they complete all 3 of the mazes. Is there a way that I can make a variable or something to be able to check if a maze was already completed then cause that maze to have it's .Enabled property set to false?
View 8 RepliesI'm just wondering if there is any way to dock a separate process in my form? For example, Firefox.
View 2 Replieswhen I open an application to make changes, and I open the toolbox, it appears in the work area with my form. How can I get the toolbox to be to the left and separate from the form?
View 2 RepliesThis may sound silly but is it possible to run a separate exe and call a specific form to load?
For example:
Let's say I have two exes one that checks licensing and then once that is done it calls another separate exe to load a specific form based on the type of license selected?
It sounds doable but can anyone share a snip it of code that may do the trick?
I've looked at the on line doc over and over, and I can't seem to figure out why this won't work. This code runs the thread, and the thread seems to execute the code in the 'threadsafe' sub, however neither the progress bar is updated or the button click performed.
Imports System.Threading
Public Class VisNotify
Inherits Form
[Code].....
I'm creating a project but I only need exe's as my final thing. I don't know how to put it in simple terms, but here is how I need it to be..The main window remains open i.e.frmMain. ther other forms are only called by an external program (LanSafe UPS Software) every time something happens (Either batteries gets disconnected or power fails). Each of these forms have to be separate executable files. This application is for sending SMSs using Fusion 100 modem. Is what I need possible?
View 8 RepliesI need to be able to access a progressbar in my form from a separate class.
I tried
Dim Prog as Progressbar
Public Property Pg()
Get
[Code].....
I need to be able to access a control from a separate thread and return to the thread again.
Edit: Its just an example I gave prog a value of the object from the form and the invoke required is put in a sub so thats not my problem.
I have picture boxes added to a FlowLayout panel and a ContextMenu strip (associated with picture boxes) with 'Add description' item.
When I right click on a PictureBox and select 'Add description', a new form pops with large preview of the picture and a text box to write the description.
How can I preserve the text written by the user on the new form, after it's closed, so if user wants to edit the description, he doesn't have to type it from scratch again?
I figured I'd have to store the description somewhere and load it into the form when user clicks on the same picture again, but how can I know what picture he clicked on?