Separate Paragraphs In A Textbox?
Jan 26, 2011If I have a textbox, and I want to generate some paragraph into it, it makes sense I will want to use linebreaks.
View 2 RepliesIf I have a textbox, and I want to generate some paragraph into it, it makes sense I will want to use linebreaks.
View 2 RepliesI Have a textBox on a form to give me my IP address (but I have 3 anwser's going into 1 textBox) When I use a button to revile The anwser's,all in one Textbox .How can I seperate Each anwser's with a space. Code Below: (TextBox5 is the TextBox I need to seperate the Answers) [code]
View 12 RepliesWithout using a variable.i tried the [code]this code does not work it just change the text of the textbox2 but not the textbox1.
View 18 RepliesI have a textbox where the user inputs a string.
I want to take the string, and output each character into a seperate textbox.[code]...
I have a program where a user puts a string into a textbox, and then character one goes into Textbox1, char2 goes into TB2, char3 goes into TB3, etc. I have a For loop that gets all of my textboxes that are used for this, and I have my for loop that is supposed to go through my string character by character.
[Code]...
[code]...It is a multiline textbox, and I want to be able to enter different pieces of information (info1, info2, info3) into each line.
View 16 Repliesi want to seperate textbox characters every 4 characters. like this:
regular text =
1234567812345678
filtered text:
[code]....
I need to out each line of text to a seperate textbox. or label. Im not sure about a string. Can a string hold a value like, "192.168.1.1 2302"? If so, then how would i output it to a string. If not, textbox or label please. Please keep it simple as possible, since I will probably be needing to repeat this process 500 times, like, a different string for each line, i will have a lot of lines. Dont care about the textbox limit, as long as all the lines are outputted to each textbox.[code]
View 15 RepliesI'm using Visual Basic Express 2010. I have the prompt, the textbox and the calculate button. For the answer do I have to make a separate label for the answer in seconds and the actual response "That will take (separate label for answer) seconds" I made a click event button and assigned the following as global variables at the start of the form:
Const intSpeed As Integer = 1207
Const intTime As Integer = 3600
Then I made a click event for the button. I don't know what the formula is. Basically the user inputs a distance in the box, the calculate button tells you how long it will take for the vehicle to travel that distance in seconds.
Here's the interface: [URL]
Criteria:
Are We There Yet?
The Thrust SSC, a super fast vehicle tracked at 1207 Km per hour (750 mph) was clocked on the Black Rock desert back in 1977. Build an application that will tell people how many seconds it would take to get to their destination if they were driving the vehicle. Of course this doesn't include having to stop for stop signs, travel through school zones, or slow down for corners.
You need to include the following:
1.) Design the application with a prompt label and textbox to collect the distance from the user.
2.) A calculate time button
3.) The form must have the text property changed to read "Are we there yet?"
4.) The objects must have both the Text property and Name property changed to an appropriate value.
5.) A constant global variable should be used to represent speed of the vehicle.
6.) A constant global variable should be used for seconds (there are 3600 seconds in an hour)
8.) A local Dim variable declaration can be used within the button click to hold the distance value.
7.) Variables should be declared with the most appropriate data types.
8.) Include a "Text Changed" event to reset the time in seconds to a blank value when the user starts entering in a new distance.
9.) Comment code should be included
I have an Articles table in my databasein the Bodycolumn I have the textof the article, I have "<p></p>" tags onthe paragraphs.
Now I can read out the Body to a pageand it works great, but what I would like to readout each paragraph into a control, I'm notsure of which yet.
Probably each paragraph into its own table.
I would need to know how to get the tagsand the text which is datatype varchar.
Is there a SPROCthat can handle thator do I have to do something in my code whilereading the Body column.
[Code]......
I am having problems with creating this change problem. The idea is that the user puts the amount of money in the textbox and then in separate textboxes shows Dollars, Quarters, Dimes, Nickles and Pennies.
Example:
You Money: 12.54
Dollars: 12
Quarters: 2
Dimes: 0
Nickles: 0
Pennies: 4
Here is the code I have so far:
CODE:
I have to create a textbox which will list down one column of datas from textfile which is separate by delimiters.But as I have to filter alt.Row from the text file, what can i do?
View 9 RepliesUsing regular expressions, how can we find all paragraphs of match type A NOT B E.g Find all paragraphs which has the word "pattern" but doesn't have the word "regular".So in the following text, 2 & 3 should be selected while 1 should be omitted:
1. With regular expressions you can describe almost any text pattern
2. including a pattern that matches two words near each other.
3. This pattern is relatively simple, consisting of three parts.
I want to read from a text file and display it in a label. However, when I do that, I see that there is no word wrapping. In the sense, a whole paragraph is displayed in one line and the next one in the next line and so on. Can some one please tell me how to read text from a file and make it display as it is (lines as they are)? I am using the following code right now:
Imports Microsoft.Office.Tools.Word
Imports System.Runtime.InteropServices
Imports Microsoft.Office.Interop.Word
[code]....
I have the following code which seems to work as intended.
From what i can tell is that Size is not the same as the amount of characters in a particular string, Is Size a size as in Bytes,Kilobytes etc?
Edit: Ive attached a PDF showing the output from this code. Which as you can see shows the wrong output and the sentence's go off of the side of the pdf.
So from what i can see is that tempPage.width (Which is 612) is some how wrong, because 612 characters goes off the side of the PDF Doc.
Public Sub writeParagraph(ByVal text As String, ByVal fontSize As Integer, ByVal align As Char)
Dim newPara As New paragraphLine(text, fontSize, xAxis, newFont)
[Code]....
This was working as intended but then i realised "What if it was possible to generate 1 paragraph at a time and then check the yAxis of the page and if it has been met or exceeded then continue to write the paragraphs on a new page".
Im having a blank brain day lol , I cant seem to work out the correct calculation to extract each paragraph 1 at a time and add it to the arrayList.
I created a telephone number form where the user enters the telephone number in a text box as (nnn) nnn-nnnn. The first 3 digits in parenthesis are the ISD code, the next three are the area code and the last four are the local number. I need to separate out these three fields of the phone number and display in three separate text boxes labeled appropriately. Now, suppose the user enters the phone number in a text box as a continuous string of 10 digits, where the first three represent the ISD code, the next three represent the area code and the last four represent the local number. I'm lost as how to change this string into the form (nnn) nnn-nnnn. This is what I have
[code]...
I have 3 paragraphs of text on a page...I want to change the font size of the paragraphs after every 3 seconds. What I want is when the page loads para 1 is 10px and para 2 is 8px and then after 3 seconds para 2 is 10px and para 1 is 8px. I mean like using an update panel or something?
View 2 RepliesI want to read from a text file and display it in a label. However, when I do that, I see that there is no word wrapping. In the sense, a whole paragraph is displayed in one line and the next one in the next line and so on. Can some one please tell me how to read text from a file and make it display as it is (lines as they are)? I am using the following code right now:
Imports Microsoft.Office.Tools.Word
Imports System.Runtime.InteropServices
Imports Microsoft.Office.Interop.Word
[code]....
I would be grateful if someone could explain how to highlight differences in html text which is pulled from an SQL database in VB ASP.net.I want to compare two rows of similar text in the database and highlight the paragraphs/areas which are different to display changes of previous versions of the text on a web page to the user.
View 2 RepliesI'm trying to remove empty paragraphs from a .docx file before parsing the content into xml. How would I achieve this?
[Code]...
I have a TabControl object on my form with many tabs created in code (TabPages) and my problem is that the same objects that are in the initial TabPage needs to be in the other TabPages created in code, I have this done in code when the user clicks the 'New Tab' menu option, however the same code is used for any new tabs created. The problem created here is that I have an event against one of the objects that appear in the other TabPages, but because the same code is used to create any new tab pages, the event will only work on the newest tab page, if that makes sense? By the way these objects that appear on the other TabPages are properties at the top so events can be handled against them in the respective subroutine.
[Code]...
I'll get straight to my problem - I'm currently coding in Visual Studio.I have a table (countries) with the columns ID | Name. The table is filled with around 28 records.I also have a form with 4 combo boxes (set up as 1,2,3 & 4) that I want the user to select. These combo boxes will display the names from the table countries. I then want to use the selected names in the combo boxes to Insert into their corresponding ID into another table. For example England would have the ID 1, USA the ID 2 etc.So, is it possible to have separate combo boxes that will give separate ID values but using the same table? At the moment I can't seem to find a solution.Eventually the form will have more than 4 combo boxes so I don't want to use separate bindingsources for each combo box.
View 5 RepliesI want to build an application using VB, that is essentially an information system.The operation of this system would be as follows:1. User can select one of several buttons, each button being a different topic.2. When a button is selected, information about that topic appears on the right hand side of the form.3. The system allows information to be added by a user So, for example, if a user clicked on the button named 'Banana', information about the banana would appear on the form, where the user could read this info, scroll down etc.I would also like the user to be able to search a specific word like 'apple' and for information on the apple to appear.How could I implement this? I don't know how I would store paragraphs of information, and then search for it based on a keyword.
View 1 Replieshow to make first line paragraphs in VB 2008 with rich text boxes. I need the code for it. PS. First Line Paragraphing in when only the first line indents and the rest of the paragraph stays normal. I need the code for Visual Basics 2008?
View 2 RepliesI have a few forms that have a lot of really intensive updating along with a great deal of user interface (text boxes, button clicking etc) Is it possible to open a separate form as a separate UI thread from the start up form that called it to "show" or open or whatever the new method might be?
View 6 RepliesIs there a easer way of coding in stead of wrighting long long paragraphs like this in one line [code]All of this is on one line and i got lots of info to put down.."The game will begin on your 16th birthday with your mother waking you up. Today you are to go to the castle for the first time. Leave your bed and open your dresser for a Strength Seed. "
View 2 Repliesi want to separate bellow lines by ; using vb.net
Name=203596:0
sigTs=16
CIC=100,7FFF7FFF
LinkSet=001
userID=01
i have variable in web page and i want to do:
copy two things X and Y
x:Name
y:code
i have make to file ini one for x and one for y
in the page , the information like this
x
y
x
y
.....
first line x and next line y >>>
I want to compile a file in the X and Y in another file
There are two forms. For the form1, the view is 1 textbox and the button. For the button in the form1, when it is click, it will go to the form2 which consists of the datagridview. After select the numbers from the datagridview, it will go back to form1 and display it in the form1 textbox. But I want to separate it with a comma. Here is the code in form2: Private Sub btnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click
[Code]...
We have an access database that contains Version table. the same file is stored in 2 separate locations, how would i pull the information from both c:db1.mdb and \servernamedb1.mdb's table so i could compare the two?
View 14 Replies