I'm trying to enable toggle type selection on rows of a datagridview, i'm developing my project in Visual Basic .NET.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
With DataGridView1
.Columns.Add("Column1", "Column1")
.Rows.Add(4)
[Code] .....
I am trying to manage the state of a MaskedTextBox based on the check state of a check box. If it's checked, looking to disable and clear the contents of the MaskedTextBox and if not checked, then to enable it and focus the cursor. For some reason, my logic is not doing anything. On initial load of the form, when I check the checkbox, the MaskedTextBox does clear and disable, but then it stays disabled.
[Code]...
How can I toggle the selection of a datagridview row?If I pick the Row once it should "highlight"If I pick the same row again I want it to "unhighlight"this is what I have so far in a mousedown event:
If
Selected_RowNM = Selected_RowNM_Temp Then
DataGridView1.ClearSelection()
End If
I have a datagridview that is showing Yes and No in 2 checkbox cells. (Logically I should have just one checkbox but it is a legacy program (from Excel VBA)). So what I want to do is if the user clicks one checkbox cell to make the value True then the other checkbox in the row needs to be set to False. I have googled and searched the Forums here for an answer for this but found nothing really specific. The envisaged problem here of course would be that the events are mutual so they should not keep firing continuously in a "loop" when one or the other is changed - that might be the really difficult bit.
View 5 RepliesWhen user unchecks the checkbox for the datagridview row, messagebox displayed, if the user answers yes the row is deleted, if the user answers no then I need to re-check the check box. however it doesn't actually check unless i click anywhere on the datagridview afterwards. get the dgv to updated?
Private Sub DataGridView2_CellValueChanged(sender As Object, e As DataGridViewCellEventArgs) Handles DataGridView2.CellValueChanged
If e.RowIndex <> -1 Then
[Code]....
Basically I am trying to enable the user the ability to select a folder and the folders music files populate a list box. I want two list boxes on the page, one with all the contents of the folder and then the other one for files selected from the first box. I have no clue on how to do this at all...
View 4 RepliesIn VB.NET 2008 I've two forms 1 & 2 containing two datagridviews connected to two data source 'ACCESS 2007 tables' Now I want to select multiple rows from one datagridview (form1) & transferring these to another empty datagridview (form2) with a button_click.
View 3 RepliesI an working on image converting program. I need to convert a file that the user selects in an openfiledialog to the following file types in a folder that the user selects:
.ICO
.PNG
.JPEG
.BMP
.GIF
The user will select which type they want to convert the image to.
Is there any easy way to check if a selection made by a user from the browser is an image type and not any other file type. I could check for extension types i.e. bmp, jpg etc but what I would like to know is whether there is a generic term.
View 4 RepliesI'm testing the code below from another author, which works well for reading in the data. Despite this, once the data is populated I also need the DataGrid to be able to accept and delete data too. Is it possible to modify the code for this? I tried several things (in properties too) but am not sure if it is possible in this example.
Dim statesXml As XElement = _
<states>
<state name="California">
<abbreviation>CA</abbreviation>
<year>1850</year>
[Code] .....
"Does the selection type of variables speed up the code execution in VB.NET?"For example, I have two same exactly same projects where the first project is running with all Single variables and the other project which running with all Double variables.Is there any difference in term of the speed of code execution?This is because I'm working on a project which is very critical in term of the speed of execution. However, I'm using Double variables for most part of the code.
View 4 Replieshow can I enable horizontal scroll bar for datagridview control?
View 4 RepliesI have 2 issues- first if i use LINQ query as datasource with datagridview then how I can Find a row in datagridview and also how to enable automatic sorting through headers of datagridview if i am using LINQ.
View 2 Repliesi take a datagridveiw ..in which i make a datagrid that no on can edit a cells but they can scroll a scrollbar. i can not used ENABLE property..b'cs in it i can not scroll .... i used v s 2008
View 1 Replieshow to enable pressing enter or tab in a cell of the datagridview control.When i press enter it moves to the next cell , the same with tab.Instead i want to be able to actually press enter and a new line character will be inserted within the cell.
View 1 Repliesbased on a selection of name and time i want to add a value or text in datagridview,but it doesn't return a value... this my code
Public
Sub Btnplanner_Click(ByVal
sender As System.Object,[code]......
Is it possible to multi select cells in a DataGridView over several rows?
Example:10 columns, 2 rows
Say I click and hold in row 1, column 5. If I then go down to row 2 column 5. I want column 5 to 10 in row 1 and 1 to 5 in row 2 to be highlight.
Am using vb.net 08 and i have a datagridview with 3 columns. The first column has a button as the columntype with the name "UserName". Now, i want if the user clicks only on the UserName which is the first column, but not the entire row, it should display the value of the UserName column only. If other columns are clicked are apart from the UserName, nothing should display. So there will be a for loop that will itera te through all the rows of the datagridview.
So i have something like this:
CODE:
I have been looking all over the place trying to figure out how I can programally select a certain Cell in a row. What I am attempting to do is when doing Rowvalidating, and I find that the user has not filled out a column, I do a msgbox, then want to have the cell have the focus, so user can enter in the data. IE, like the way you can cause a text box to have the focus.
View 4 RepliesI want to know if it is possible to click in one cell, and the entire row be selected.
View 6 RepliesI am using VB 2008. My DataGridView could contain a thousand rows in alphabetic order and I want my users to be able to find a row quickly without them having to scan through many rows. I could provide a row of buttons captioned A to Z or I could provide a search field in a textBox but in either case my program would have to find a particular row and focus on that row. Question one: Does DataGridView have a function that searches for a a particular value in a specified column? I have found no alternative to sequentially searching through the list. Question two: Once I have identified the index to a particular row, how can I make that row become the selected row?
There is so much to DataGridView that somebody should write a book specially about DataGridView. I would buy it.
I have a vb net program that shows a datagridview which pulls data from a mySQL database. When the user clicks on a row (I am checking for a 'cellclick' event), a text box is filled with data from a hidden column in the datagridview. This works fine and runs without error, BUT...When I use the cursor keys to move the selection up or down, the row highlight changes, but doesn't update the text box. I realise that this is because I am looking for a 'cellclick' event, but I don't know how to look for cursor keys as well.
Please could someone tell me what event I should be looking for to capture input via both mouse click and cursor. I have changed the program so it updates the second dgv on 'selectionchanged' but this crashes at run time with an InvalidCastException.Alternatively, is it possible to stop the user using the cursor keys?
I can't for the life of me remember what that first(non column) is called.. its where you it has the right pointer or where it has the * for a new row. Anyways... I don't want to see it.. and want to remove or hide it from the datagridview I am working with...
What is that column called? and how can it be removed or hiden?
I have a DGV that has a check box in the first column to indicate marked rows. After the user marks the rows they want then the OK button is pressed and the form closes. I need the row data that they marked to be transferred some sort of temp db (preferably in memory - 30 rows or less) so I can insert the data to a tabbed UserControl. I also would like to retain that row data while they are working so in case they want to open the form with the DGV again that the previous marked rows show up.
[Code]...
I've a problem with DataGridView component when trying to set the value of the CurrentCell. What i'm trying to do is :
I've a DataGridView With values. I want to make a button in my forms and when clicking on it I want to change the selection from the current row to the next. To explain more, by clicking my Button I want to simulate the effect of a mouse click on a DataGridview.
I have an inconsistency in behaviour when I try to get the CurrentRow after a row has been selected.
If I select the first row in a DataGridView object using the mouse, the DataGridView1.SelectionChanged event fires, and DataGridView1.CurrentRow is the newly selected row (Row 0).
If I select the first row via code however ie. DataGridView1.CurrentCell = DataGridView.Rows(0).Cells(0) then the DataGridView1.SelectionChanged also fires, but CurrentRow is the old row, not the new row.
In fact CurrentRow doesn't get updated until AFTER the SelectionChanged event has fired if you force the row change in the code, but is updated BEFORE SelectionChanged if you do the row change via the mouse or keyboard.
how to check if its the first row if I've moved to the first row using CurrentCell ?
I have a ticketing system that reads a MS 2003 MDB. I can easily fill the DataGrid view with all of the items on the data set How ever I need to be able to have agents filter the rows by login(key)
I have a large list
made this way
csrLogin.Add("james", "TomJim")
I select agents on the menu strip and the combo box populates all the names in that collection (combo box displays TomJim in this instance
I have an SQL query made (I think it is correct)
[Code].....
I'm trying to select a company name from a data bound combo box, then display the relevant record in a data bound datagridview.
I've currently used the Data Sources wizard to set the connection string, create the dataset and dragged the combo box and datagridview onto my form.[code]...
How can i bind a comobox selection to a datagridview without writting code...
i Need to select an item from a combox and based on that item refresh the datagrdiview. I did something like that in Access but i don't know how to make it work in visual studio 2008.
once i select the datagridview itme that i want to edit i'd like to be able to update back to the database. I know i need to write code for this but at least i'll have the data refreshed on the datagridview.
I had created 3 datagridviews dynamically. In each dtatgridview a single cell is selected by default. I want to avoid this default selection how can I do this?In a single form 3 cursors.....Not active but looks very boring.
View 2 Replies