IDE :: Add Chkboxes Using Form_Load Event?
Feb 15, 2010
Create a Visual Basic project with a Form that displays a seating chart for a small theater. Assume that the theatre has 25 rows and each row has 10 seats. The following image shows the completed main Form for the solution.
Write statements in the Form Load event to instantiate an object from the splash screen form and then display it as a modal window. Write the statements so that when the main Form loads (after displaying the splash screen) it will dynamically create the 2-dimensional array of CheckBoxes on the Form. The CheckBoxes should be created inside a scrollable Panel control instance. Above the scrollable Panel control instance display the column numbers (1 to 10).
View 3 Replies
ADVERTISEMENT
Jun 6, 2012
I migrate a project from vb6 to vb.net.In vb.net project form's events are fired randamly. I mean form_Activated event are fired first after that form_Load event are fire. and this events are fired more than one time.what condition form_Activated event fired before form_Load event.
View 2 Replies
Oct 28, 2010
I have a form that I call from another form. Whenever I call it using form.showdialog() or form.show() the form appears, but it never executes the code that is in the form_load sub.
What's the deal? I call other forms in the same manner and they all load and execute the load code without issue.
View 16 Replies
Sep 23, 2009
does anyone know why the form load event being completely ignored/bypassed during loading the app? The form loads but none of the code in form_Load sub being executed (yes I tried putting a break inside the sub and it didn't trap)
View 13 Replies
Jul 9, 2009
I have a problem concerning the Form_Loading event: When I want to load a new Form (ImageDisplay) the ImageDisplay_Load Event is not executed first.
Instead it runs through the global variables definitions and then executes a Private Sub called numericupdown1_changed.
The numericupdown1 field is part of the form I want to load and has not been touched.
That is my calling sequence:
Private Sub Dispalydata_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Dispalydata.Click
Dim myDisplay As New ImageDisplay
[Code]...
The strange thing is that for other forms in my code it works well and starts with the form_load function.
View 10 Replies
Nov 27, 2009
I am having a problem in Form_Load. When the following code executes the form pops up with out executing any further code: Me.TblAssetsTableAdapter.Fill(Me.ITP400_IP3_ADataSet.tblAssets).
I am trying to use Form_Load to populate values in a ListBox control from an Access database table.It appears the problem was in the Compile settings. It was the 'old' problem of using AnyCPU on an x64 machine. I changed the Compile setting to x86 and the problem disappeared.
View 3 Replies
Dec 18, 2010
I am using visual studio 2005. I want my form should be editable, when i am pressing some function key. Like, when form load, no field should be editable. When i will press "Ctrl + N" or "Ctrl + F2" Key then only form should be editable. Is this possible?
View 7 Replies
Dec 14, 2009
I want to display form1 for 5 seconds on my form_load event, after 5 seconds i want it to close , im not sure how to do it with a timer,
View 2 Replies
Oct 29, 2009
I was under the impression that there was not much difference between Sub New() and Form_Load. However, I found one weird bug...Add a combobox and a label to a form, and the following code:
Public Class Form1
Private mstrOutput As String = ""[code].....
The label text shows that the value of ComboBox1.Text changes between Sub New() and Form_Load.Is this meant to happen?
View 5 Replies
Apr 23, 2009
I am attempting to create a dynamically built form, where by the user adds names to a listbox using a setup screen, the listbox names are written to an .ini file, then the main app:
[Code]...
View 7 Replies
Jul 21, 2011
I have been playing around with VB for a while now, but still need to consolidate some thoughts. I was wondering if anyone could answer this..... Whats the difference between say Form1_Load and Public Sub New() on form startup? The reason i ask is i normally add calling subs to the form load process, but can you add any startup calls to the Public Sub New(), and if so, what is the advantage?
View 1 Replies
Jul 20, 2011
I'm practicing for defining classes and I'm doing it in windows app. After having a class and its properties, i don't how to access it in form_Load. I want to display data that I've in New , the constructor. I want to display it using messagebox. Please tell me how would I do it?
[Code]...
View 5 Replies
May 24, 2010
I made alternate way to read and write..but im stucked on loading .ini, This is how is reading done:
public void Form3_Closing(object sender, System.ComponentModel.CancelEventArgs e)
{
IniFile ini = new IniFile(".\\language.ini");
ini.IniWriteValue("Language", "Lang", name.Text);
[CODE]...
How to write this code exacly.
View 2 Replies
Dec 30, 2008
VB2008: use a BindingSource on numerous textbox fields. The form loads ok and all of the binding is working fine. My problem is that I need to set certain form defaults based on the incoming data prior to showing the form. I cannot find a form event that fires after the data is bound, yet before it is displayed. I tried Form_Activated and several more. The bound fields are still showing zero-length strings. This wasn't a problem in VB6. Can anyone point me in the right direction?
View 1 Replies
May 1, 2010
I am trying to write a graphing program that will draw on/in a picturebox during the form_load event. It works if I connect the code to a button event and click the button but the exact same code in the form_load event seems to do nothing. I've tried calling cmdDraw.PerformClick() and cmdDraw_Click() and although the Draw button works when I physically click the button with the mouse, nothing seems to happen when these functions are called during the form_load.
[Code]...
View 7 Replies
Jun 19, 2010
I have a piece of code like...
If FRM_LOADED(lngID)
Then
FRM_X(lngID).WindowState = FormWindowState.Normal
[Code]......
and in VS 2008 the form (FRM_X ) loaded and invoked the Load method. After upgrading to VS 2010 the same code executes and displays the form but the Load method isn;t executed.
View 3 Replies
Mar 1, 2010
how can i select full and first row of datagridview in vb.net on form_Load
View 2 Replies
Oct 19, 2011
Visual Studio 2010 (vb.net window form application)
Access 2010 database
Form1 holds a datagridview bound to bindingSource
I pass this binding source (current selected row) to edit form edit form contains 2 tabs On form_Load of edit form:
Private Sub frmEditCust_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'AutoBillDataSet.Customer' table. You can move, or remove it, as needed.
[Code].....
View 1 Replies
Jan 25, 2011
i have a problem: I have a Form_Load-Method which is not doing all the commands in it. It just interrupts and jumps to the "Form_Paint"-Event, eventhough i did not yet paint anything or invalidated any object. The Form_Load-Method is this:
[Code]...
the dashed line indicates the point of termination. the for-loop is simply not done. i tried it with stop points and the last point it stops is the ReDim-part. this can only mean, that the ReDim-Command forces the program to leave the method. but the for loop is never done afterwards. Can you help me? Because i really dont get it.
View 2 Replies
Mar 10, 2011
this code was just working! but for some reason it stopped to work now. when i run this project the following code is supposed to execute but it does
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim xmldoc As New System.Xml.XmlDocument()
[code]....
View 2 Replies
Mar 5, 2009
The application I'm writing requires the user to select a certain directory on their hard-drive (a game directory), which is saved to the Settings. If the directory is not selected, my application can't work. So, when the program starts for the first time, the directory setting will not be present, and I want my application to ask the user to select the correct directory before the application starts (the main form is shown). I used the following code in the Form_Load event of my main form:
vb.net
If My.Settings.WolfPath = String.Empty Then
MessageBox.Show("Please select your root 'Wolfenstein - Enemy Territoryetmain' mapping installation.", "Select W:ET Path", MessageBoxButtons.OK, MessageBoxIcon.Information)
[code]....
It looks pretty complicated (probably too complicated) but I wanted to make sure that the user cannot continue until a valid directory has been selected. So when the user cancels the folder selection, my application should end. If the user selects an invalid directory (it should end in "etmain") it should display a messagebox and show the folder browser dialog again. It should keep doing this until the correct path has been chosen.The problem occurs when an invalid directory is first chosen. The messagebox does show, but it shows behind all other applications! It took me a minute to figure that out, because I could not find my application anywhere, but Visual Studio still said it was running... After finally finding the messagebox behind everything else, it seems that now everything comes up behind everything else! When I click OK on the messagebox, the new folder browser dialog also shows up in the background, etc, etc. If I then choose a valid directory, the application loads the main form in the background...
I thought at first the problem would be the fact that I am running this code in the Form_Load event. A better place perhaps would be a Sub Main() from which the main form would be loaded explicitly (Application.Run(mainForm)). However, I can only select Forms as the Startup Form. If I disable the "Enable application framework" checkbox I can select the Sub Main() as Startup Object, but all the visual styles are lost...?
View 5 Replies
Sep 18, 2010
I want to draw graphics onto a form without using paint or load events.
This Example works untill the graphics get covered and uncovered. Then the graphics vanish.
Public
Sub DrwBrdrBx()
Dim DrwBrdr
[Code].....
View 12 Replies
Aug 18, 2010
In my program's Form_Load I randomly generate a time value. Once I generate the time value, I put it in a DateTime variable. I need it to work like a clock. I know I can do this with a timer with an interval of 60000, or using TimeGetTime and updating a variable.Is it possible to do this with a thread?
View 3 Replies
Feb 19, 2011
Is it possible to check locale format on form_load and change it to en-us via registry if any other is preset?
View 5 Replies
Jul 27, 2009
I have two data tables within my data set that are loaded onto my form on form_load using statements written in code (not the designer. When I change a value for the first table via a text box the change is made to the data set. But when I try the same for the second table, the change doesn't remain in the data set when I switch to a different company and come back. I query the second table using the primary key of the first table but no code is needed when I change the values for the first table so I don't understand why the same doesn't work for the second when I change a value via a data-bound text box....
Here is my code that initially binds the data:
'This is used to read our data from the data base
Public Sub Read_Data_SQL()
Call Clear_Bindings()
[CODE]...
Here is the code I call when the selected index of my company combo box changes to have the second table reflect that of the first:
'This sub populates any information contained in the Contact2 table
Private Sub Update_Contact_2()
Dim Company As String = cmbCompany.Text.Replace("'", "''")
[CODE]...
View 1 Replies
Jul 31, 2010
I've read thru Iceplug's tutorial on control arrays and got it working. I tried to add a new event by basically copying his click event code and calling it a doubleclick event. I used the proper addhandler and assigned the correct name to my sub. I have the click event changing the background color to blue and the doubleclick event changing the background color to green. The background color does not change to green. Why?
Heres the tutorial with my new code encased in asterisks ...
Code:
Imports System
Imports System.Windows.Forms
Public Class form1
[CODE]...
View 7 Replies
Mar 30, 2009
I am using VB.NET for Windows applications. What is the difference between Load event,Activate event and Enter event in the Form and in which order the above event is executed.
View 2 Replies
Jul 20, 2010
I'm trying to validate a few things in a form I'm building. It has a datagrid with clients info (taken from an access database) and a few textboxes where the user can type some search criteria. The thing is that those same textboxes are used to add new clients to the database and to modify a client's information if one from the datagrid is selected, so I made it that the buttons to insert and modify clients are disabled on load and thenevery time the text on a textbox changes ("TextChanged" event) they become enabled. So far so good. But then I wanted to make it so when a client from the datagrid is selected both buttons become disabled again until the text on a textbox changes (to make sure they're adding a different client and not the same one that was
selected).
I tried using the CellClick event from the datagrid to disable the buttons, but since every time a client is selected from the datagrid the info is shown on the textboxes, this triggers the TextChanged event too, and the buttons become available.So, is there a way I can tell the TextChanged event not to be triggered when the CellClick event occurs?
View 3 Replies
Apr 18, 2011
The event handlers in my parent class are never called though the events are raised in the child class.
The Code:
Public Class childForm
Public Event checkboxchangedEvent(ByVal checkbox1 As Boolean, ByVal checkbox2 As Boolean)
Private Sub checkboxchanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged, CheckBox2.CheckedChanged
[code]....
View 2 Replies
Nov 27, 2010
I'm trying to complete this airline reservation application, but having a problem in this part of the question:Creat an event handler for the FlightBindingSource's PositionChanged event: select FlightBindingSource in the class Name combobox then select position changed in method name combobox to creat the FlightBindingSource's PositionChanged event handler. Write a code to access the currently displayed flight object and pass its flightNumber to method DisplayPassengers as a decimal.This Is my code so far:
HTML
Public Class AirlineReservationForm
Private database As New ReservationsDataClassesDataContext()
Private Sub FillAll()[code].....
View 13 Replies
