Interface And Graphics :: Design - Make A Form Transparent
Nov 18, 2010i make a Form transparant where i dont want form background. So say like i got a round form and i can transparant the white background of the round even possible?
View 6 Repliesi make a Form transparant where i dont want form background. So say like i got a round form and i can transparant the white background of the round even possible?
View 6 Repliesi am making a program with graphics and im using a picturebox for a button. The image inside picturebox is transparent .gif. The problem is that i don't know how to make picturebox transparent. I searched the internet but all exaples didn't work. Does someone know how to fix this problem?
View 4 RepliesI have a form and on it there is listbox. What I want to do is to make the listbox's backcolor transparent. I really do not understand. I have searched many sites but I couldn't find an exact answer. Is it really that hard to make it??? I found this code on a few sites:
[Code]...
I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
View 4 Replieson the form i have a groupbox with a few textboxes and labels inside of it. Behind the group box i have a picturebox image. I want this image to be seen around the textboxs etc.. through the groupbox
Ive tried changing the background colour in the properties to transparent but you can still see the background colour and so the groupbox covers up the picture.
I want the background of the groupbox to be completely transparent.
I made a game in VB 08 and I have sprites and a background but I need to know how to make the background of the sprites transparent.I'd like to note that I'm using a picture box for my sprite, and the game is animated (I read that those things are relevant).I've read a lot on bitblting but I don't understand it, and when I found a helpful article it mentioned to use the .hdc. This article though was made before the introduction of GDI+ which now makes it harder to obtain said .hdc.
View 11 Repliesi'm working on Virtual K770i project - there is a picture of mobile, now i want to create clickable areas on "keypad" of mobile....I'm got idea about transparent label or something but transparency dont work on any object but Form1 - so how to make transparent clickable areas on picture box (see a picture)
View 2 RepliesI am attempting to write a simple 11ball style game. It requires images of poolballs overlapping each other. Since the balls will need some internal intelligence I was hoping to create them as usercontrols.I am having trouble gettiing the control's background to be transparent.Setting the background color to (Web) transparent only makes the background clone the form background color.
View 1 RepliesI'm a web designer and I was asked to make a GUI design for a Visual Basic desktop application. I'm looking around but cannot find good documentation for designers. Can anyone make me some suggestions about where to start?
View 2 RepliesI'm a second year A-level student (12th Grade U.S. equivalent) studying Computing, Physics and Maths. I like anime, PC gaming, climbing and mountaineering. That's an insight to who I am. Thought I'd add it here to my first post since I couldn't spot and introductions section.
[Code]...
I have been trying to discover how to make the contents of a form expand or retract in response to moving its borders by grabbing them with the mouse, or by use of the 'Maximise' or 'Restore Down' controls.The explanation in �Help� concerning TableLayoutPanel, Panel, Anchor and Auto size doesn�t help much, especially as it I can�t get it to work.
View 7 RepliesI'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
View 2 RepliesSo now I will try to make something more complex, still playing around with this graphics thing.I want a picturebox to display a tileset (a bunch of 32x32 tiles normally used for creating game levels etc), the picturebox is inside a container (which has autoscroll ON). The picturebox is larger than the container, so the container will make scrollbars automatically.Now, I need to be able to choose a tile or multiple tiles (if I click & drag the mouse)Basically I want to draw a 32x32 "red" box over each selected tile (so the user knows what tiles are selected).So first of all, I need to know when the mouse clicks the picture. Good. It works.Now, I need to know which 32x32 tile was clicked. Well, I think I can calculate that just fine.BUT, what if the user drags the mouse while clicking on a tile? I want to support multiple tiles selected, but I am clueless about tracking what tiles were chosen.If we solve that problem, I would have another curiosity: You know the "red boxes" that tell you which tiles are selected? What would happen if I dragged the scroll bar? I need the redboxes to move along with the picture, and hide if they go to an invisible area.
View 6 RepliesI am trying to incorporate in my vbdotnet application a form in which I would like to make a thumbnail from an image. So what I have is two picture boxes, one with the source image and the other with the destination image, I would like to crop the image from picture box 1 and display it on picture box 2, but the way I wan to crop it is not giving the coordinates of the selected area box but to simulate a selection area box in which the mouse can move the box and select the area of the picture to be cropped. This selection area box would give me the coordinates i need in order to proceed the cropping. The problem is I don't know how to create this selection area box. It is like doing the cropping on a graphic design software like Macromedia Fireworks, Adobe photoshop, even paint.
View 5 RepliesI tried to create a lineshape and make it visible when a timer ticks. Also tried to set everything that would matter when creating it(border colors and thickness etc)
But still, I got no results.
Code:
Dim line = New Microsoft.VisualBasic.PowerPacks.LineShape(CX, CY, ccx, ccy)
line.Parent = New Microsoft.VisualBasic.PowerPacks.ShapeContainer()
line.Enabled = True
[Code]....
I can't seem to make a GUI in the shape a circle...
something other than square/rectangle.
I have a red, green, and blue color that I am making with this method:
Code:
Dim Red1 As Color = Color.FromArgb(75, Color.Red)
and a brighter red:
[code].....
Any recommendations? I like the fact that 255,255,255 is white. Is there a way to create color by combining three colors that were made from argb? I may just have to make my 20 different colors set and then refer to them.
i want to make a class for a custom button for which the user of the class can choose his own images for Normal, mouse over and mouse down state.
View 5 Repliesim making a program that needs to make a new button for each .exe file in a directory? Kinda similar to PortableApps program that will recognize each program in the directory.
View 3 RepliesAs Autodesk is going to discontinue VBA for their Inventor product in the near future I have been looking at other ways to run VB.NET in Inventor. To date it doesn't look like VSTA will be the replacement. Automation from an External VB.NET app is certainly possible, but leaves something to be desired for speed and integration. Compiled Add Ins are the Cadillac of choice but can be a royal pain to debug and develop. Autodesk now provides a lightweight VB.NET script interface called iLogic. It's main purpose is to allow extreme customization of Solid Modeling parts. The code actually resides inside the Part Model file.
[Code]...
I am using the following code to place a rectangle around a form / form control, however what I want to do is make my screen grey and only the form / form control area be displayed in colour.
Code:
I have googled for ages trying to find something on this, but with no luck.
To illistrate this better they are using the same functionality in snagit 10, please see below link to a page that has a video link showing this (23 sec into video)[url]
How can I add a scrollbar to my form I tried the auto scrollbar option but is not working ??
How can I validate the user inpute inside a textbox to check that he type the desired word?? for Example validate if the user typed the word ( Bob)?
how to maximize my form window and for example my list view, tool strip container etc etc, maximize with the form window. I would just create the form to my monitor 1440x900 but this will be used on several computers all with different monitor size. What I'm looking for is a quick easy way of doing instead of setting each one up separately.
View 1 RepliesHow would you add a Dynamic Contextmenustrip to your form and how would you add the items to the contextmenustrip. Also when adding the items to the menustrip is it possible to give them names and text dynamically if so how?
View 5 Repliesknow that there is library which can change the theme of the form but i do not
View 1 RepliesI'm looking for a tool that will allow me to display, and change forms, inside my original form.
View 5 RepliesI have following code to resize the form at run-time but it does not work. Form size remains same. What could be the possible reason?
frmErrMsg.btnNo_Err.Visible = True
frmErrMsg.btnOK_Err.Text = "Yes"
frmErrMsg.Height = 800
[Code].....
I am using a MDI form and child forms. Now I don't like the standard back colour of mdi form so I got code on the net which paints a gradient colour to the mdi. So far it is working okay.Now the problem is when I load a child form or close it or do a similar activity then it causes flicker in the mdi background. This gets pretty annoying at times and you see the background flicker.
View 2 RepliesI've got a form with no borders, and I am wondering how a user would be able to move this form around. I would like it to be moved the same way a form would move by left-clicking and holding the top border. I know that's a little vague, so if you need any more info feel free to ask...
View 1 RepliesOk, i know the simple media controls to play a video file on the control screen, but is there a way to play the video on the form background?
View 2 Replies