Interface And Graphics :: Get The Address Bar To Alter Which Ever Tab Is Loaded And Not Just The First One
Nov 15, 2008
I am a VB6 programmer, and I have been trying to learn VB 2008. I'm making a web browser, which is going quite well... but I am having problems with my tabs.
1. When I load it automatically opens a new tab... but instead of opening it 1 it opens 2 new tabs.
2. I don't know how to get the address bar to alter which ever tab is loaded and not just the first one. Here is my tab code.
[Code]...
View 2 Replies
ADVERTISEMENT
Sep 23, 2008
I am trying to verify that an image has been loaded into the picturebox1. I am loading the image from the web and need to verify it has arrived before I can save it to disk. If I save it to soon I will save nothing and that will crash the app. I have tried to use 'if PictureBox1.image = nothing then' ... 'End If', but that isn't a valid check. I can obviously not check picturebox1.image if it is empty or has an image.
So the question is, how do I verify that the file has finished loading?
View 4 Replies
Aug 15, 2011
I have a Main form that has a split container in it. In Panel1 there is a treeview control. Panel2 is initally blank when Main loads. Upon clicking on one of the nodes in the treeview a form will load in panel2 and adjust the location of the controls based on the size of panel2. The controls are all in a panel themselves so that I am only moving a single object.
Moving the controls when the form in panel2 initially loads works great. But if the size of the Main for changes then the only way to get the controls to reposition is to click on the treeview and reload the form in panel 2.Code for the tree.
Code:
Private Sub TreeView1_NodeMouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.TreeNodeMouseClickEventArgs) Handles TreeView1.NodeMouseClick
Me.SplitContainer1.Panel2.Controls.Clear()
[code]....
I tried to with code in the panel2_resize bit i got an error as soon as I clicked on the treeview as i did not know which form was currently loaded. What would be a method to accomplish repositioning the controls in panel2 regardless of which form is loaded?
View 3 Replies
Nov 19, 2010
Im working on a project that needs to print a report of one client.Everything went smooth untill i came across my multiline input text data.When i display it in the PrintPagePreview the text go's outside my page. Even when im printing it only the halve of my text is displayed. I googled and looked everywhere but i can't get a clear fix for it.
[Code]...
View 3 Replies
Jan 22, 2011
I used to program with Visual Basic 6, so I have alot of old programs that I'm updating, plus I'm learning the new VB2008 methods. I'm writing a program that replaces the old "BitBlit" function which is no longer supported by Visual Basic 2008. It involves three picture boxes, one holds the sprite bitmap, a second holds the mask (silhouette) of the sprite bitmap, and a third has a background image.
[Code]...
View 3 Replies
Aug 14, 2009
drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.
View 2 Replies
Jan 12, 2010
how to create a user interface in a game such as the application XFire using Visual Basic?
View 3 Replies
Oct 19, 2008
I'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
View 2 Replies
Jan 12, 2011
Ok, I want to create a class that will handle a special rectangle graphic.In my form, I want to have two of these special rectangles. So, basically, I need two instances of that class in my form, right?I manage to initialize two, alright. But, how exactly am I supposed tomanage drawing/graphics etc in a class, and the results to be displayed in my form?
View 13 Replies
Oct 29, 2008
Using graphics paths for designing...but am getting an error when trying to add a shape to : _shapelist.add(createshape())
It says : Value of type 'system.drawing.drawing2d.graphicspath' cannot be converted to '1-dimensional array of system.drawing.drawing2d.graphicspath'
View 2 Replies
May 18, 2012
I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
View 4 Replies
Apr 21, 2010
I'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)
.Dll:
Code:
Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer
Function SetData(Data As Integer)
end interface
[code]....
this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.
View 6 Replies
May 21, 2012
Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?
View 1 Replies
Jan 19, 2011
So I decided to make my famous tile selector project, but instead of drawing in a form's graphics, do it inside a tabpage.Well, I managed to get it working, but it seems to... flicker.Normally, setting the form's DoubleBuffered property to True would help a lot there, but apparently, the tabpage has no such property.
When I invalidate the tabpage, I draw two images and fill one rectangle.Following past advice, those two images were created before, just once, and are stored in a variable so I don't create them every time I invalidate the tabpage.
View 1 Replies
Aug 1, 2010
Ok I have this: This makes a sub called 'graphicspaint' then writes "demo version" to a picturebox1
Code:
Imports System.Drawing
Imports System.Windows.Forms
[code]......
View 8 Replies
Dec 5, 2011
i whant do my own shadow effect. i can do the shandow. but how can i plus 2 bitmap images(1 above the other)?
View 15 Replies
Oct 28, 2011
I load my picturebox with a jpeg. If I put my DrawObjects() sub into picturebox paint event.When ever a picturebox.refresh or picturebox.visible = true (vb.net seems to draw my DrawObjects() first, then load the jpeg Image over my drawing - erasing drawing) Is there a way to get the picturebox to redraw the jpg image first then draw on it, in picturebox paint event?
View 10 Replies
Nov 16, 2009
We loading and executing an assembly dynamically from code. While reading a dynamically loaded assembly how can we find an interface within the assembly which is marked (decorated) by another class like below
<ExternalDataExchange()> _
Public Interface IwfService
Event firstEvent As EventHandler(Of ExternalDataEventArgs)
End Interface
Here how can we find that we have interface "IwfService" which is marked with "ExternalDataExchange()" class.
View 1 Replies
Jul 22, 2010
Track An IP Address Using A GUI Interface In Visual Basic. - VB.NET Advanced Discussion | Dream.In.Code [url]...
View 5 Replies
Apr 4, 2011
Just want to know if it is possible to do an image mapping in VB2010?..
View 3 Replies
Feb 16, 2012
I am using Visual Basic 2005 for an Operator Interface in an industrial setting. Where should I be looking to help make my Operator Interface even more eye pleasing and practical?
View 2 Replies
Oct 4, 2010
I am having a datagrid in WPF application and I need to show the text wrapped in the cells. Basically I am reading from SQL server and displaying them in the Datagrid. Some of the fields having more than 255 character length and I want to show them as wrapped. To do this, I created my own style and trying to apply that to a data grid cell, but it is not working. [Code]
View 1 Replies
Apr 11, 2009
I'm considering working on a video encoding framework. Essentially a program to re-encode a video file from one format to another, using codecs which are widely distributed. (Codecs commonly found on the average PC.)Emphasis would be on reformatting - rescaling, cropping - in a visual environment. Is vb.NET a good environment for such an application or would it be wiser to look elsewhere?
View 4 Replies
Jun 18, 2009
I'd like to be able to graphically represent a position in a 3D graph and be able to rotate the grid to match a certain perspective. I've looked for tutorials online, but they all mention how to import or create common file types. I don't want or need to do this. I just need to know where to begin. I have the DirectX SDK, but I'm not sure where to start with it and need some direction.
View 1 Replies
Aug 12, 2009
How can I add a scrollbar to my form I tried the auto scrollbar option but is not working ??
How can I validate the user inpute inside a textbox to check that he type the desired word?? for Example validate if the user typed the word ( Bob)?
View 2 Replies
Feb 17, 2009
how can i automatically update my value when a user changs the combobox item. At the moment i have a button click when the user changes the combobox item and press the button the values get updated, everytime the combobox item get changed i have to repeat it click the button to update the value. I want something where automitically as soon as the combobox item selected the total value in the text box to change without clicking the button:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If ComboBox1.SelectedItem = "Seafood" Then
TextBox1.Text = 3.5 * ComboBox2.SelectedItem
End If
View 3 Replies
Nov 30, 2010
I would like to include a bar chart in my program. My present tool box does not have that control. how I can include that control in my tool box.
View 2 Replies
Oct 27, 2011
I've been having some trouble with a draw subroutine in a project I'm working on. The last time I did anything like this in VB, drawing on a form was as simple as calling the Line() function, so I'm not clear on a lot of these things. Here's my code:
Code:
Private Sub drawBox(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles btnDraw.Click
Dim blueBrush As New SolidBrush(Color.Blue)
Dim i, j As Integer
[code]....
The code is just meant to draw a grid of small squares across the form, using the centers() array, which is set up elsewhere. My problem is that I can't figure out how to call this sub. If I use Handles Button.Click or Mouse.Move or something like that, VB returns an error saying that Draw and Mouse functions are incompatible. I can't call it normally, because I don't have values for sender and e.
View 2 Replies
May 16, 2010
During form design and after placing a scrollbar on the form, I ran the debugger and found that the center of the scrollbar was transparent. After playing with this a bit, I managed to stop the transparency by changing the key to bright pink as I have nothing with that color. Can the transparency key be disabled?
View 3 Replies
Dec 31, 2009
I have inserted a form into my project that a friend sent over. The form works but if I add more controls to it they are not displaying.
The controls are all there in the <form>.designer.vb file but are simply not displaying when I run the form.
I have looked around the net but can find no reference to a similiar problem.
View 1 Replies