I'm creating input radio dynamicly on a ASP.NET page using PlacHolders.
While reader.Read
Dim ltr As New Literal()
Dim ltr1 As New Literal()
[Code]......
how can I get all the items selected on those input radio.
I need some help with the input validation of my application. Attached is the code that I have written as well as a screenshot of the front end. I specifically need input validation to verify that the user selected input for cbLengthOfStay is a number between 1-10 as well as input validation to verify the user input for txtMedication, txtSurgicalCharges, txtLabFees and txtRehabilitation is a positive numerical number. Please feel free to critique my attached code. [Code]
View 2 Replieshow to checked Radio Input on webbrowes with code ?
View 10 RepliesI have a javascript function and need to add it to some dynamically created radio buttons onclick from code behind.I've tried newRadioSelect. Attributes. Add("onlick", "javascript:toggle(this);")The code above adds it to the span tag that the radio button creates, any ideas how to get it on the input tag of the radio buttons?
View 3 RepliesSimple code, I have 3 radio buttons that change the color of the form. Thing is when I run it, my first radio button (red) is already selected. I know I can make a hidden button and focus it on that, but is there a way to just make it not have anything selected? I tried rdoRed.Checked = False Doesn't work.
[Code]...
If I have two radio buttons on the first form of the project, they are both uncheck by default. However, if I have two radio buttons on a form that I open with MyForm.ShowDialog(), the first radio button is checked! Is there a way to stop this?
View 4 RepliesI have two groups of RadioButtons, each group inside its own GroupBox. When a RadioButton from one group is selected, the handler passes the selected button - this is not a problem.
But I need to grab the value of the selected RadioButton from the other group as well - is there a simple way to do that without iterating through them all?
How do i checked that within a GroupBox 1 radio button has been selected? I want to provide the user with a message box telling them they have not made a selection from one of the 12 radiobuttons within the group box?
View 3 RepliesIf I wanted to hide an image when a radio button was checked, how would I go about doing that? Does anyone have any good resources to read?
View 4 RepliesI'm trying to sort records in the gridview right after a radio button is selected. My approach is with the dataview, but because the dataset variable doesn't survive a round trip to the server, I don't know how to make this happen.[code]
View 1 RepliesHow can I make it so that when a radio button is selected, button1 is enabled?
View 3 RepliesI have the following:
<asp:RadioButtonList ID="rbIsRep" runat="server" RepeatDirection="horizontal" >
<asp:ListItem Value="1" >Yes</asp:ListItem>
<asp:ListItem Value="0" >No</asp:ListItem>
[code].....
How do I make an if statement that would check if the user has selected an option from the select list named cboGrade and also to check if the user has selected a radio button from the group named gbCalcType? I have an action that is carried out when a button is clicked, but before that action is carried out, I need to check the above.
I have this so far:
If rbPlus.Checked Or rbMinus.Checked Or rbMultiply.Checked Or rbDivide.Checked Then
instructions are here
End If
This checks that one of the radio buttons are selected. How do i check that an option is selected from the option list? There are three options: 3rd, 4th, and 5th. And the text starts out saying Select One and it locks the control once they choose one.
I have a WinForms application (VS 2008, .NET 3.5) that has a form with two different group boxes, and inside of each group box are different sets of radio buttons. When I run the application, the first group box automatically has the first radio button in it already selected, and the second group box does not have a radio button selected by default.
I have looked through all the properties of the radio buttons and the group boxes, and cannot figure out what the difference is between the two.I would like both group boxes to have all radio buttons unselected when the form is first opened.Also, I looked through the Designer.vb file for the form, and could not find anything unusual going on in there either.
I have a group of three radio buttons. Depending on which radio button is selected, I want to disaply one of three controls - a textbox, a dropdown list, or a button. How do I display controls based on the result of a selected radio button?
View 1 RepliesI have a Radio Button List that lists different business categories. The last option is the Other category. When the user selects the Other category, I want to be able to enable a text box that the user can then enter further information to explain the Other selection.[code]...
View 2 RepliesI am using a GridView with its first column as a template field with radio buttons.
I need to make the first radio button in the first row of the grid remain default selected during page load / postback.
I'm a beginner so please take it easy on me. I was wondering what the code is for the text of ANY selected radio button to appear in the multiline textbox that is already set up. Is that at all possible? If so, can you do the same for check boxes?
View 1 Repliesi'm trying to design a program where I can take all the software that i have and just put it on an external Hard drive open this program at a customers house select what software I want to install and than let the install run through everything. I'm running into a problem with my winrar installation since I have a x86 installation and an x64 installation I want to be able to select the checkbox for winrar and than choose either the x86 or x64 and than it will install. I figured out how to set everything up it disables the two radio buttons until the checkbox is checked but I can't go through and uncheck the checkbox (say if I accidently checked it or something)[code]
View 2 RepliesBasically I want to change a text if certain radio button is selected
Private Sub Form2_Shown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shown
If RadioButton1.Checked = True Then
Label11.Text = ("Boca Juniors")
End If
End Sub
I'm pretty sure the Form2_Shown is not correct but I dont know what else to put.
Okay so I need some help with radio buttons. Basically what I am looking to do is make an "If...Then" statement but it needs to know which radio buttons were selected to finish the "then" part of the statement. What code would I use to do this?I don't really want a spoiler, more of an explanation of how it actually works also.
View 11 RepliesI'm new to VB.NET BTW. I designed a form and radio buttons and a submit button with a picture box ! Every radio button selected will display the image related to it in the picture box !
So, we have
O smile
O sad
O mad
O happy
O ...etc
When pressing the submit, the selected radio button will display a face of the mood !
Here is my code.
If RadBtnSmile.Checked Then
PicBxMood.load("smile.gif")
End If
If RadBtnSad.Checked Then
PicBxMood.load("sad.gif")
[Code] .....
How do you input binded Radio button if checked values "String" to the data base using query Like if check radio button Male the gender in the database will be "Male" And female if otherwise the ,database column is string in my db and my dataset is radio button the inputted record should have male or female in gender column. I'm confused also with date time picker in vb and it is date/time format in database column.
View 1 Repliesi want to display a certain section of my form based on the number selected by radio button.( scale 1 to 5) by default 1 is clicked . if they click 5 then the same portion will be repeated 5 times .i have the database table structure to support this . but how to code the radio button to do the same .
View 8 RepliesI'm curious if there is a "check all" kind of thing for a tablelayoutpanel? To explain, say I have TableLayoutPanel1 with 6 radio buttons and I'm doing an error check to make sure that at least one radio button has been selected during a click event. Do I have to do If / and with all 6 radio buttons? Or is there something like "If TableLayoutPanel1.checked(obviously not this) = false then".
View 5 RepliesI am having 3 radio buttons and a button The codes should be added to the button_click event, when ever the radio button is selected and the button is click then, The codes should determine which button is selected and assign it to a variable. Create a two parallel 1-dim arrays and populate it with the data below:
[Code]...
CODE:
Right now i have the following code. it is 4 radio buttons that if selected will display the price of a ticket.
There is a button called "repeat offender" that should take the price and double it. so me, being new to visual basic, were thinking of trying an if statement such as If it is selected decTicketTotal * 2
But this did not work. any help would be appreciated.. just trying to get the repeat offender selection working so when it calculates the price will double.
I have 10 buttons 0-9 And i have 4 textboxes All representing different values (n,e,x,y) Ok so what i want is to be able to use my 0-9 buttons to input the numbers into the boxes. However my problem is How can my program know which text box the mouse cursor is in. Right now, i can only get it to go in one of the boxes That i tell it too by using the textbox's name. Or all of them at once.
SO is there a way that when i click in text box "n" when i click numbers they will go there. Then if i click in text box "e" and click the the numbers, they will go in there?
get selected value from database and input this value to combobox. [code] when I run this program . in combobox 1 just have 1 value.in database I have some value.
View 1 RepliesLet's say I have a console application that performs some actions on text files. I'd like a way to, in Windows Explorer, select multiple files, then hit a function key (or something like that) which launches my application using the selected file names as it's input parameters.
View 1 Replies