Monitoring Total In / Out Internet Networking Flux?
May 16, 2011Is there a way to monitor and determine the total in/out flux from and to the Internet (not just one port or one program)?
View 2 RepliesIs there a way to monitor and determine the total in/out flux from and to the Internet (not just one port or one program)?
View 2 Replieswe have our system running but our system needs to be modified because we did something wrong...we are doing an "Internet monitoring System" in our school library where the user can only access the internet 1hr a day, and he/she cannot use the internet within that day if he couldn't buy a time on a serve...every students should only have 20hrs time usage per semester...our problem is every day their 20hrs is being reduced in 1hr.. the rule is the time per semester which is 20hrs that is given to the students was reduced 1hr only if he uses the internet..but our system is reducing their 1hr every day.
View 1 Replieshow to create a screen capture program in internet monitoring system...
View 5 RepliesHow do I code the total cost to give me a pound sign with the total cost at the moment when the total comes up for an example it gives me 3.6 when I need it to show £3.60 here is the code I have so far. [code]
View 2 RepliesThe pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
I am working with VB 2008. I want to be able to run this program say in N: and it will show me in an excel sheet the following:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
where clients contains subfolders and files and the size is the total of all those files within each folder and the count is the total within each folder also.
This works fine as it is but i have to select one by one the top level folders and some of them are huge so it takes forever to give me an answer.
1) I would like to see in my spreadsheet the following by only select the network drive n:
Folder Path Size(GB) Count of Files
N:Clients 0.53 308
N:Software 10.7 15430
N:Billing 0.98 105
2) I would also like to know if this is the faster method.
3) I tried adding a progress bar so that the user can have an idea of how much this will take but i had to remove because it was not working.
4) I would like to see the folder name, size of folder and count of files in the listview.
Here is the code:
Imports Microsoft
Imports Microsoft.Win32
Imports Microsoft.Win32.Registry
Imports System.Collections
[code].....
I am using visual basic 2008 amd creatomg a datagrodview format like below [code] Now I wnat to get total balance in total column after less discount in percentage with ENTER EVENT proceedure and get the whole total column balance in a textbox i.e Net BalanceTextBox. Please tell me how to calculate discount in percent % and get total in total column and also tell me how to move cursor in next cell instead of bottom row in datagridview.
View 2 RepliesI have 3 columns in a unbound datagridview, "length" "height" and "Total". Total = length x width and the final total in TextBox outside of the Grid. I found question simalar in this forum and tried the code but i am getting errors.The following is the code i am using
Public
Class Form1
Dim UnboundColumn[code]...
how should i implement networking through vb.net 2008?
View 6 RepliesJust want a clarification about who to access a database through a network, her's a scenario:there is a client running a vb application, the application starts with a login form, when the user and password is supplied, a new form is shown including a datagridview with data populated from the remote machine running sql server. ide be thankful if u supply a code snippet for the connection part, and ille continue from there.
View 2 RepliesHow can I return the IPv4 address in VB.Net? E.g. 192.168.1.5
View 3 Replieswhy is this code not working?
Dim tcplistener As New System.Net.Sockets.TcpListener
This does not compile with the error "Overload resolution failed because no accessible 'New' accepts this number of arguments." The thing is, I have to declare it as New because otherwise I will get a null-reference exception...
i've been wanting to do this for a few years now and it amazes me that no one can come up with a solution.i want to write a program (preferably in vb.net) that can send a message to another computer (or device) that is connected to the same network as me. I want the message to appear on the other computer (or device) in a popup message box. Also, it would be ideal if this could be done through some sort of bluetooth connection, if not then local ip connection will do. I don't know how i would go about doing this but i know it's possible because i've seen some programs do it... in fact i've seen a program called blackrain that without any additional software installed, can display messages on an ipod touch screen to instruct the yser what to do, and then display the results from their input on the computer screen, almost instantly. I would like to know how that works as well if anyone has any thoughts please feel free to share them!
[Code]...
I'm realizing a .NET chat application but i still have that error: I can send only a message per connection. For example. With the code below, i can send only one message that can be received correctly by the other peer, but if i send another message message, on the same connection,it won't be received by the remote PC. Here is the code:
[Code]...
I just made my project, I just wanna ask is possible to share your project to the other computer, like file sharing or networking, which you can access your project to the other computer, is that possible? If possible, how should I do that?
View 2 RepliesAs winsock, in the case of VB, what is the control or package available for networking in .net?
View 2 RepliesI am a Network Administrator in the Army so programming is not my strong area. I have been messing with Batch files and WMI, just recently i started VB Scripts (VERY BASIC) like adding an input box to set computer name, scan network for computer name on domain, return wmi info for that remote computer etc... I know there are programs out there that can do all of this, however the Army will only allow certain approved programs to be installed on government workstations, i have been using .Bat files to gather info which is fine, however it is very time consuming when you have entire subnets with computers, networked printers, etc to place into a spreadhseet for higher headquarters tracking not to mention the over 20 columns of required data to track for each computer. I have VB 2010 Express, working on a Windows Form Application Project. Goal is to interface my VB Script (written with notepad) with a GUI that will generate an internal spreadsheet on the form window in a datagridview. So far i have the basic window and i have my gridview with my column headers set. How do i get the data into the columns and rows accordingly.
Application Basic: Execute Program, in main window select button (Scan IP Range) <--- I want this to open an input box for the beginning subnet, input base address to start scan from, next input box for end range, then msgbox for start scan. i want the results of the scan to autofill the datagridview and add new row for each IP address that had a ping reply, returning valid data from WMI results as it receives the data. What would be the best method to achieve my goal. i am not asking you to write the program, i have been looking and studying MULTIPLE sites, think i just need another set of eyes on this to unlock the knowledge i have locked away, if ya know what i mean. Also, if you don't mind let me know what you think of this app im trying to turn out... Super Thanks for your help.This is the Base Batch File running. It calls an external VB Script written in notepad. (I want this implemented into the app form so there is no console window.)This is the inputbox from external VB Script that is called.This the result of the external VB Script (the info i want to put in the datagridview of the app.)I also, for some reason can't get scroll bars to show in the app when i hit F5, theres about 15 columns passed the MAC column...?
Am working a vb.net 2008 project using ms access database 2007 and i successfuly finished it. i published the project and burnt it with cd. my database path in vb.net was located c:Deploydatabase.accdb.
so i installed the program in to another 2 networking PCs. when i run them and put the database path c:Deploydatabase.accdb in every computer, its working. but the problem is that:
i need the database to be accessed by server or my machine for instance where every other networking computers are able to access my database in this location of my machine (my be as defualt) without not putting it to their pcs.
This enables me to see what every machines users can add information to the program.
for example, i have got 10 computers networked each other (i.e comp1, comp2, comp3, comp4, comp5, comp6, comp7, comp8, comp9, comp10). i have installed the program in every computers so when/if comp1 adds/edits informations to the program, then all other computers are capable of receiving this information which means comp4 can see what comp1 has entered in the program.
A peaceful 2009 to everyone! How could i create a social networking site using visual asic.net 2009, i will need reports as administrator, kindly email your answer to {REMOVED}
View 5 RepliesI have a small application that is currently released. It does not use any database technologies. I built into it some simple copy protection that allows the app to run as a 10 day trial. After this it needs a licence number that I generate based on a code my app provides to the user.This works great for one or two standalone machines but I am now being asked about more flexible pre activated site licencing. Currently this is a bit beyond my skills. I need pointing in the right direction. I assume if I remove my copyprotection and install on a network share, that my app will run.My app also stores some data in the registry which includes the serial number and copy protection data. I could probably switch this to a local file if this helps.What approaches are there for networking my app and copyprotecting it at the same time?
View 1 RepliesIn our VB.Net application, we need to get the path to our data folder in Public Documents. In our standalone application this is straighforward using the SHGetFolderPath function. However, for our network application, we run into a problem when we load the application on a Win 7 server and run it from a Win XP workstation. From the workstations, SHGetFolderPath returns the workstation's public documents folder instead of the what we want, which is the server's public documents path.Is there any way within the application to query the public documents path on the server?
View 1 RepliesI made my own advanced networking system which uses System.IO.Streamwriter and Streamreader but offline. I would like to let this use a directory online, I have a webhost available for that, now how do I say to the program it has to look at a specific map with all the users information?
I now have already this into my login form:
Private Sub btnLogin_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnLogin.Click
On Error GoTo A
[CODE]...
Just curious if I can let my network grow out international instead of pc. Also I have a second question. I made a create account page which is supposted to make a text file with the txtUserName and txtPassword inputs, but it does create the file, but doesnt write any lines into it.
Code here:
Private Sub btnCreate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCreate.Click
Dim UserGenerator As System.IO.StreamWriter
[CODE]...
I'm new to forums as well as new to VB 2008. I'm in process of making a order calculator which will total any values you selected in combo boxes/checkboxes and then display it in a selected area. There are 3 things that I want to achieve: 1. Be able to add another total to an existing total (currently I'm able to see only one total when I hit "Calculate" button)2. Display how many orders I have made so far (new total counts as one order)3. Be able to add up checkboxes selected to an overall total. (when I try to add up one checkbox with another it seems to be stuck on 1.5 pounds which I assigned for each "side order")
View 4 RepliesI'm writing a social networking application in VB.NET, with a target userbase of 1-2 million users. All user data will be in memory in a dictionary of 'User' objects with properties such as Country, Region, Age etc exposed. I need to perform search against multiple user properties in memory - I'm not using SQL.What's the most performant way to implement a 'user search' against multiple properties?
View 1 RepliesI've been looking for a way to do this for like two days now, and no luck.
What I want to do is get into the temporary internet files, find a certain file....
(^^^ I can do that just fine (using specialfolders, etc) ^^^)
and get the internet address associated with it.
See the attachment if you don't get my meaning.
<!-- [if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent>[code].....
I am a beginner in network programming with VB 6, I am a beginner in network programming with VB 6,I wanted to ask is how the VB 6 source code to know the bandwidth usage of each client in an Internet cafe, we as a server at the cafe, suppose that we had five clients that are connected directly to server, on the server so we know the bandwidth usage of the clients.
I want to make CPU and RAM Monitoring tool in Vb. But I have no idea and knowledge about this.I can make a GUI for this but I don't know how to implement this.If you have some experience please tell me what references I have to use and what are the functions which will give current status of CPU and RAM. and also guide me how to present this information in the form of continuous graph and progress bar.I shall be thank full to all participants. If you have no experience please refer me some expert sites and groups on internet. I will try to contact them.
View 2 RepliesThe below code (VB 2008) will check the print queue every milisecond for a job. It will then show the pagecount in a text box. It works great when im printing to a local printer, but As soon as I change my pc default printer to a network printer, I cant capture any data.
View 1 RepliesI want to create a bandwidth meter for Windows using vb.net, but I cannot seem to find anything in the .net framework for monitoring the amount of data in or out. I want to create this because I cannot find a good one for free, and I think it is something that people might want.If there is nothing in the .net framework for monitoring this, is there some P/Invoke calls I can make? If so, what are they?
View 6 RepliesI start an external Program using System.Diagnostics.Process.Start I want monitoring when a user has started a new file, saves or opens another file and get the info of the file in current process
View 1 Replies