Progress Bar Running Function?
Jun 14, 2012I have the following code:
[code...]
May I know how can I put a progress bar to make it keep running when the function FnProcessApproval() is running and stop when the messagebox is display?
I have the following code:
[code...]
May I know how can I put a progress bar to make it keep running when the function FnProcessApproval() is running and stop when the messagebox is display?
get the progress bar show the progress of the batchfile running in the background?
View 10 RepliesI want to display the Progress bar control in my vb.net application until my procedure runs at the backend.
View 2 RepliesI've made an application which goes through a long procedure when a button is clicked. I don't want the user to think the program has frozen, so I'd like to add a marquee progress bar just to show that it's still running. However, if I simply add the progress bar and make it visible when the button is clicked, the bar will appear but freeze and wait for the procedure to finish before it starts scrolling.
I know this is due to both the procedure and the progress bar running on the same thread, but the tutorials I've seen on getting a process to run on another thread seem confusing. What is the simple way to make a progress bar run on a separate thread?
I have seen numerous sites that provide examples on creating progress bars. I would like to know how to "call" the progress bar (created as UserForm1) to update a completion percentage of records processed from a Main macro in Module 1.
View 1 RepliesI am running a test program for VB.NET, and it will simply crunch a million numbers in for loop. I've linked a variable implying the progress of the for loop with the progress bar, but it seems that when I run the program, the progress bar does not update itself. The bar itself has only value 0-100 as input (as stated in the document) and I've tested it without using the for loop, and it works.
View 2 RepliesI have several reports that all merge onto the same datatable. The user can click several to run and then hit the 'find records' button to run them all simultaneously. Since they each take so long, I'd like to update the user on the status bar as each of these stored procedures is called successfully. However, when I call the procedure, i only get one update at the very end listing evertyhing.
[Code]...
I have a VB.NET 2010 app that uses a backgroundworker to process MS Word docs. All of the code does what it is supposed to do, except when my code calls ReportProgress(). The UI cannot process the ProgressChanged event fast enough before the values in the class that are passed are changed. I know this because I inserted a System.Threading.Thread.Sleep(100) line after each ReportProgress() call which allows time for the UI to make the updates properly. I guess I am looking for a better solution thanThread.Sleep(100) since this adds to the amount of time it takes to process all of the files. Here are some snippets of code that I am using:
[Code]...
I'm working on an updater for my applications. I'm using VB .NET 2005. So, when I push the button called "Download" it runs twice and does the following: Download the file (~20mb). When the file is downloaded then it does again the same overwriting the first file. I used the following to make the download possible:
[Code]...
i face a problem in checking file condition.I wish to create a program that can check the condition file continuously while the program is running.[code]If I suddenly remove the file, it cant show a message File not Exist or if I suddenly receive a file and place at the folder,it cant show me a message File already Exist.How can I modify my code to continuously checking the file condition while the program is running.
View 1 Replieswhen trying to run a function in a separate thread, my reason for trying this is because since the application is only run on one thread, the GUI hangs when the function is called.[code]In this code, the Print screen Button is pressed and the function HookCallBack is called.The problem is that the function has variables that need to be passed and returned, and while searching, i found a website that had an answer for this, and it required the function to be put in a class, and then it could be run on a separate thread while still passing all the variables needed.url...But the code cannot be placed in a class without giving errors and it seems to me like i did something wrong. The code is meant to be used in a form and not a class.My question is, how would i go about running the HookCallBack Function in a Separate thread?
View 5 RepliesI am Using same function from many places...for example below function
Public Sub getUser(ByVal Name as string)
dim myName=Name
.......
insert(myName)
End Sub
I am using this function from so many places...I have doubt should this function override this myName values with latest function call?Suppose i called getUser("ABC") so value of myName is now ABC now sudden all call getUser("XYZ") so at insert(myName) will it insert("ABC") or insert("XYZ")??I need it to be insert("ABC") and then insert("XYZ")
I'm teaching myself vb.net. For my first project I am making a md5 dictionary attack tool.I know that there are alot of them but I figured it would be a good way for me to start out.Right now I'm looking for other methods of running the words through a function that I have created.
View 10 RepliesIs it possible to run a function or to execute a button just after the form was loaded? I mean to execute it just as the form_load subroutine has ended, so the form is already being displayed.
View 2 RepliesCurrently the process is in VBS, however this means there is no real interface.I attempted to get this into HTA, but this doesn't work to well due to known issues - the interface doesn't update with information until the end of the code (functions) are executed.So I thought I would create a VB program to do the work.Ideally, I would have a form load, and once loaded the functions (which map drives accordingly) will display the results on the screen.My code should be pretty sound - it is working - but it seems to be invoking BEFORE the form is displayed.I have tried various subroutines, such as Form1_Load, Form1_Activate, Form1_Shown, but all of these execute the code before the form has loaded and is displayed on the screen.As a test, I have
Private Sub Form1_Shown(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
lbl_Head01.Text = "HELLO WORLD"
[code].....
I have created an application using visual studio 2008. The application is to copy the data from one excel file and paste to another excel file. The problem happen when i try use the copy paste function at the same time in other excel file.(I have opened others excel file before the application start.) I'm noticed the value that i paste is not same from what i copy in the excel file.(the application is running behind and using copy paste function at the same time.) How to hold the value using vb.net when copy from excel for the application so that other copy paste function is not affect it?
View 2 RepliesIn my .NET porject, I have to run a lot of validation on 4/5 fields. This validation checks if certain fields have errors, for example: the name field is not allowed to have numbers or symbols. If all these checks are passed, I need to execute a SQL query to pull some data out of the database. I could have it with a lot of nested IFs, and run the function at the end once it passes them all, but this will translate into about 12 nested IFs, and it seems a really bulky way to do it. I have also thought about setting a boolean value after every check, and if the value is 1 then don't run the function, else do. But of course this gets overwritten by other checks that pass.
View 2 RepliesI have a form set up where I want to run the function PopulateGrid on it's Form_Load event. I have initialized the DB connection as follows:
Private Sub Main_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
LoadConfigFile()
cn = New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & config("DatabasePath") & ";")
cn.Open()
End Sub
Now, I want to run the PopulateGrid function directly after I connect to the database as shown above. I'm confused as to how I'd use a database query in a module when the database is initialized in my main form. Would simple setting the variable cn to public work?
im making a web browser which is intertwind in a project, but i cant get the progress bar to display the current percent of a page that is loaded, i want to have 10 segments, each standing for 10% of the total page loaded. So say a page is loaded 67%, 6 out of 10 of the segments will be shown.
View 3 RepliesI am trying to implement a BGW and want to report progress to a progress bar for my TextFieldParser program, sometimes if your opening very large files it takes a while and I would like the user to be able to see the progress and have some interaction so they know the program is still running I am a little hung up on what to in the reportprogress
I have:
worker.ReportProgress(0, myReader.ReadFields())
and its not doing anything, I didnt expect it too since ReadFields is an array
parser
Private Sub BackgroundWorker1_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
Dim worker As System.ComponentModel.BackgroundWorker = DirectCast(sender, System.ComponentModel.BackgroundWorker)
[code]....
I copied the code here and translate the code to vb [URL]it is working fine but there is one small problem but I cannot solve? Here is my code: SyncClientVB Another Source The scenario is... the progress is reported by an event (OnCopyingFile event)
Public Sub OnCopyingFile(ByVal sender As Object, ByVal e As CopyingFileEventArgs)
If pbFileTransfer.Value <> e.PercentCopied Then
If txtCurrentFile.Text <> e.FilePath Then
txtCurrentFile.Text = e.FilePath
[code]....
The problem is that it is ok when runned but when I click the form it starts to hang but in the console... it is still continuing.
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('6f5d1b01659646618ff3bdca29fb1b7f')
I have two forms, when the user selects a button, the second form opens and an external executable begins an automated process. The point of the second form, is to only show the current progress of the automated tasks and closes when those tasks are completed.How would I use a progress bar to show the current progress of an action on a different form without knowing how long it will take?
View 9 RepliesfrmMain - Allows user to pick process or combination of processes they want to run frmProcess - Shows progress of their selection I have three modules. Each runs a specific process. The frmMain allows the user to run any one of the three modules individually or all together in a single process (basically, runs the one after the other until done).
[Code]...
Looked through many tuts, can't find one.
View 1 RepliesI have a filesystemwatcher which place files in a queue when they are created. From the queue the files are further processed (xml into SQL database).
The mechanism works fine, but I want to add a progress bar to follow the progress of the files in the queue: processing 1 of 10......2 of 10......3 of 10 etc.For testing, I created a batch file to simulate the creation of files, so the filesystemwatcher can to his work and place the files in the queue. When I tell the batchfile to simulate the creation of 20 files, I see that the amount of files in the queue change. For example;
[code]...
In the app I'm currently making, I have two progress bars. One for current task being committed and the other is for overall progress.During runtime, I calculate how many tasks are being run and set that as the maximum. As each task completes, the progress bar is incremented by one.
I want the current task progress bar to show the progress of the current task. Some tasks can take a few minutes to complete so that progress bar works great. But, if the task is super quick, like editing registry keys, I see no progress at all.When I edit the registry, it basically goes like this:
'Edit Key
'x
'x
'x
ProgressBar1.PerformStep()[code].....
It completes so quickly that I never see the bar even move.I also have each task report its name into a label and it skips ahead so quickly that I only see the first task name and the last.Is there any way to make this do a better job at reporting the progress?
I came across a problem in my program it takes too long to calculate the values needed (about 10 sec) .But thats not the problem you don't know when the program is working or not, as it just locks up until its finshed and I view that as a problem.
I need to be able to show the progress of this .I looked at using background Workers but I get exception "Object reference not set to an instance" I believe this is because the background worker cannot write values or something ,As it works will a normal handler.
[code]...
I am trying to run a query an Access db from VB. The general query which I want to run is
SELECT * FROM Patient WHERE Patient.PatientID = ?
or SELECT * FROM Patient WHERE Patient.PatientLname = ?
I tried using an input box which captured the user input and pass that variable to the query, but that failed. Then I read about writing a function and using that, however, I keep getting an error which says Function not defined, but when stepping through the code, it seems to work. Here is my function: [Code]
i face a problem in checking file condition. I wish to create a program that can check the condition file continuously while the program is running.
For code below that I wrote:
Private Sub StartTracking_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
It just can check the file condition only once, that this is only the program first load.
If I suddenly remove the file, it can't show a message " File not Exist" or if I suddenly receive a file and place at the folder, it can't show me a message "File already Exist"
i face a problem in checking file condition. I wish to create a program that can check the condition file continuously while the program is running.
For code below that I wrote:
Private Sub StartTracking_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[code].....