i face a problem in checking file condition. I wish to create a program that can check the condition file continuously while the program is running.
For code below that I wrote:
Private Sub StartTracking_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[code].....
i face a problem in checking file condition.I wish to create a program that can check the condition file continuously while the program is running.[code]If I suddenly remove the file, it cant show a message File not Exist or if I suddenly receive a file and place at the folder,it cant show me a message File already Exist.How can I modify my code to continuously checking the file condition while the program is running.
View 1 Repliesi face a problem in checking file condition. I wish to create a program that can check the condition file continuously while the program is running.
For code below that I wrote:
Private Sub StartTracking_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
It just can check the file condition only once, that this is only the program first load.
If I suddenly remove the file, it can't show a message " File not Exist" or if I suddenly receive a file and place at the folder, it can't show me a message "File already Exist"
I just need to check whether a process is running. But I have absolutely no idea where to start!
View 10 RepliesI need my problem to check if internet explorer 8 is running a website.I'll be more specific. When internet explorer 8 navigates to [URL], an event should be triggered, like pressing a button.The "If" statement is ofcorse needed.
View 4 RepliesI need to create a program that checks to see if a certain process is running, but I need to check it at a predetermined interval, such as every 10 seconds. I also need it to relaunch the program if it disappears/crashes. I have no idea where to start, I'm assuming I'd have to use a timer and write a method that checks for this process and then another method to simply launch it.
View 3 RepliesI have a program that when youpress a button it opens another program then after that it opens a 2nd program. How can get my program to check the system processes and wait until the first program closes before the 2nd one runs?
View 5 RepliesFor my Visual BASIC class we were asked to create a project to compute your checking account balance.Included in the project should be three radio buttons (deposit,check, and service charge), one text box (the amount),and a read only text box which will show the new balance. The balance should be calculated by adding deposits and subtracting checks and service charges; Each of these must return an updated balance. If there is not enough money to cover a check,do not deduct the check amount, but charge a service charge of ten dollars. The problem I have continually run into is keeping a running balance without using do or for loops. Here is a copy of the code i have come up with which will display only what I enter into the amount text box and put it into the balance read only text box; it will not accumulate.
Code:
Private DepositTotalDecimal, CheckTotalDecimal, ServiceChargeTotalDecimal, BalanceDecimal, AmountDecimal As Decimal
Private DepositCountInteger, CheckCountInteger, ServiceChargeCountInteger As Integer
Private Sub PrintButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PrintButton.Click[code]....
I'd like to make my app check for a running process, I know how to make it check for a running process by its name but not by its location.
It would be extremely helpful if someone could solve this issue for me.
I'm making a new program so I won't be able to post my code here yet.
But I wanted to ask you fine folk how I can check if a program is running for the first time.
[code...]
Just start the program normally and when they click the menubar ask for the password they set in the first time
if it's a little iffy on my side but I just started this project and I've only made the GUI and I have no idea what so ever how to do this.
I am trying to create a small application that will tell me if a website is up and running. This application will monitor if the site goes down. The problem is that there are several websites sharing the same IP address, and I cannot use ping to monitor it for the same reason. I do not know what type of code can I use to query the availability of the website. I read about webRequest and webResponse but I do not know how to get the response information that will tell me if the site is up or down. The code should be able to tell if a site like "mundo.reporters.com is accessible. That is the only thing.information to point to a potential solution will be more than welcomed.
The server is hosting 8 websites that share the same ip address, and I need to constantly monitor if they are functional.
This is my
Private Sub Timer1_Timer()
Dim procs() As Process = Process.GetProcessesByName("samp-server")
If procs.Length > 0 Then
[Code]....
Its supposed to start the samp-server.exe if it closes but it doesn't?
I'm developing Applications in VB.NET 2008.
I have MDI Parent Form and i'm going load all form as MDI child. Here i'm going to give option to "Close All" toolstripbutton in top of MDI Parent to close All mdi child forms.
Now i would like to check that On click of Close All Toolstripbutton , i have to close all mdi child form but except those form is on process, example, I have opened/Loaded 5 MDI child forms within MDI Parent Form.
Child forms are ( just for example ) ,
1. Customer details Form
2. Item Details Form
3. Import Orders Form
4. Stock Details Form
5. Production Entry Form
Here 3.Import Orders form is importing from Excel with 5000 records and 4. Stock details form exporting to excel.
So now if i click "Close All" button then i have close only Idle form i.e 1,2 and 5 but i should not close 3 and 4 since its on some process.
So Is there any .NET option to check that form in process/idle or do I have to check manually by having any Flags ?
Well, its not text, but a number. I've currently got about 10 labels and right now I'm checking each one of them separately using if statements, but I've been told that there is an easier way using a For statement (I've never really got used to it...) to check all of them without having so many if statements... Currently I'm trying something like this (which, ofcourse, doesn't work and is completely wrong :X)
Dim i(10) As Integer
i(1) = label1.Text
i(2) = label2.Text
[code]....
I am trying to write a generic function that will check each database parameter to see if it is null, and if so, return DBNull; if not, return the object.So here is my function:
Public Shared Function CheckForNull(ByVal obj As Object) As Object
If obj <> Nothing Then Return obj Else Return DBNull.Value
End Function
[code].....
I have this create user form in my system, I want to validate in my database if the certain username that is inputted has already existing, how will I do that:Here's the code I'm using for the create button in my form:
Private Sub createBtn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles createBtn.Click
Try
If addUsername.Text = "" Or addPassword.Text = "" Or addRole.Text = "" Or addName.Text = "" Or addAddress.Text = "" Then
MsgBox("Please Fill up the required Filled")
[code]....
How I can check when someone uses the standard paste function via rightmouseclick? I want to check something before the text can be pasted.
View 3 RepliesI am trying to implement a function for my SSRS report which will return a color value depending on the values of three dates.
[Code]...
I am using following code in rowdatabound fn.
Protected Sub gvwMileStone_RowDataBound(ByVal sender As System.Object, ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs)
[code]...
ddlEProjectLevels is dropdownlist in edititemtemplate.Whwn i click edit in 1st row ddlEProjectLevels gets loaded with data from database.But in 2nd row dropdownlist does not contain values.Again in 3rd it gets loaded from db.Means in alternate rows,when i click edit dropdownlist(ddlEProjectLevels) doesnot load values.Can anybody help?
I have the following code:
[code...]
May I know how can I put a progress bar to make it keep running when the function FnProcessApproval() is running and stop when the messagebox is display?
I'm working on an updater for my applications. I'm using VB .NET 2005. So, when I push the button called "Download" it runs twice and does the following: Download the file (~20mb). When the file is downloaded then it does again the same overwriting the first file. I used the following to make the download possible:
[Code]...
when trying to run a function in a separate thread, my reason for trying this is because since the application is only run on one thread, the GUI hangs when the function is called.[code]In this code, the Print screen Button is pressed and the function HookCallBack is called.The problem is that the function has variables that need to be passed and returned, and while searching, i found a website that had an answer for this, and it required the function to be put in a class, and then it could be run on a separate thread while still passing all the variables needed.url...But the code cannot be placed in a class without giving errors and it seems to me like i did something wrong. The code is meant to be used in a form and not a class.My question is, how would i go about running the HookCallBack Function in a Separate thread?
View 5 RepliesI am Using same function from many places...for example below function
Public Sub getUser(ByVal Name as string)
dim myName=Name
.......
insert(myName)
End Sub
I am using this function from so many places...I have doubt should this function override this myName values with latest function call?Suppose i called getUser("ABC") so value of myName is now ABC now sudden all call getUser("XYZ") so at insert(myName) will it insert("ABC") or insert("XYZ")??I need it to be insert("ABC") and then insert("XYZ")
I'm teaching myself vb.net. For my first project I am making a md5 dictionary attack tool.I know that there are alot of them but I figured it would be a good way for me to start out.Right now I'm looking for other methods of running the words through a function that I have created.
View 10 RepliesIs it possible to run a function or to execute a button just after the form was loaded? I mean to execute it just as the form_load subroutine has ended, so the form is already being displayed.
View 2 RepliesCurrently the process is in VBS, however this means there is no real interface.I attempted to get this into HTA, but this doesn't work to well due to known issues - the interface doesn't update with information until the end of the code (functions) are executed.So I thought I would create a VB program to do the work.Ideally, I would have a form load, and once loaded the functions (which map drives accordingly) will display the results on the screen.My code should be pretty sound - it is working - but it seems to be invoking BEFORE the form is displayed.I have tried various subroutines, such as Form1_Load, Form1_Activate, Form1_Shown, but all of these execute the code before the form has loaded and is displayed on the screen.As a test, I have
Private Sub Form1_Shown(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
lbl_Head01.Text = "HELLO WORLD"
[code].....
I have created an application using visual studio 2008. The application is to copy the data from one excel file and paste to another excel file. The problem happen when i try use the copy paste function at the same time in other excel file.(I have opened others excel file before the application start.) I'm noticed the value that i paste is not same from what i copy in the excel file.(the application is running behind and using copy paste function at the same time.) How to hold the value using vb.net when copy from excel for the application so that other copy paste function is not affect it?
View 2 RepliesIn my .NET porject, I have to run a lot of validation on 4/5 fields. This validation checks if certain fields have errors, for example: the name field is not allowed to have numbers or symbols. If all these checks are passed, I need to execute a SQL query to pull some data out of the database. I could have it with a lot of nested IFs, and run the function at the end once it passes them all, but this will translate into about 12 nested IFs, and it seems a really bulky way to do it. I have also thought about setting a boolean value after every check, and if the value is 1 then don't run the function, else do. But of course this gets overwritten by other checks that pass.
View 2 RepliesI am trying to write a Windows Script that will allow me to monitor the following: That 2 x seperate but specific processes within Component Services "Running Processes" list are currently running and have not reset within the past hour. If I already know the PID, then I can retrieve the CreationDate (I assume which I can use to check for restarts? or is this the actual process creation/installation date) for each specific process, however if a restart occurs the PID will change and my script needs to know what the new PID is without me telling it!
[Code]...
I have a form set up where I want to run the function PopulateGrid on it's Form_Load event. I have initialized the DB connection as follows:
Private Sub Main_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
LoadConfigFile()
cn = New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & config("DatabasePath") & ";")
cn.Open()
End Sub
Now, I want to run the PopulateGrid function directly after I connect to the database as shown above. I'm confused as to how I'd use a database query in a module when the database is initialized in my main form. Would simple setting the variable cn to public work?