I know how to remove duplicates in an array (have a simple function for that) but now I was trying to do the same in a matches collection and I can't get anything to work somehow.
In this case the matches collection has a few duplicates that I want to remove.
Dim matches As MatchCollection
matches = Regex.Matches(sExtractedText, "word=""[dw]{8,30}""")
For Each match As Match In matches
[Code]....
This seems like a simple question, How do i remove duplicates from a string collection?
View 12 RepliesI tried this
vb
Dim matches As String() = Regex.Matches(tmpFieldContent, strEmail).Cast(Of Match)().ToArray()
But it didn't work, as vb says
'Cast' is not a member of System.Text.RegularExpressions.MatchCollection'.
I am trying to remove my current item in for each loop if some criterai matches but its triggering error after removing and looping again.
[Code]...
I am using myBookedRooms.remove but its trigerring error so what can be the correct way for doing it? ie, remove booked room if the room id matches with selected one
i use csv file to populate my dgv. now i wanna eliminate duplicates from my dgv. i knew it could be done using unique datatable. but i wanna eliminate it from dgv not from the dataset or datatable.to understand it in better way- i wanna check column1 if the vales in column 1 are repeated then the entire row must be deleted i.e the duplicate row must be deleted( if column 1 has 2 duplicate values then 1 row must be deleted)
View 4 RepliesI have run into this problem a number of times, and I am not sure what I might be doing wrong - or if this is just a bug, or not going to work.I have a collection that I setup on my own (eg, collection class). I then cycle a Log file that has text entires and I read those, and then parse the entry and attempt to add it to my collection.
But as each entry is added, ALL records just get duplicated - in other words, as I add entry 2, both entrys 1 AND 2 wind up with the same values - as I add 3, all 3 entries get the same value - and this continues no matter how many entries. For example,
if I added 100 entries, I would have 100 duplicates of the last record added.I have stepped through the debugger and watched this occur and just cannot figure out why this is not working as it should. Here is the code...
While
Not objReader.EndOfStream
' Read one full line
[code]....
No matter what I do, my lstSent collection just winds up with EVERY entry being the same as the last entry added.
End
IfFalse'
Add the elements into the collection if its a "Sent" itemElem = objReader.ReadLine
I am working on my program as I'm adding the listview subitems string in the label.Do you know how to remove the listview subitem in the label when the matches are found?
Private Sub listView1_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs)
Dim item As ListViewItem = listView1.HitTest(e.Location).Item
Dim a() As String = Nothing
[code]....
When I use the code on above, it doesn't remove the listview items in the label when I click on the checkbox on each row. Do you know how to remove the string in the label when I click on the checkboxes in the listview while the strings in the label is matched with the listview subitems?
I have a String which contains the following[code]...
give me a VB.NET code for this?
I fail to remove duplicates from my List. What am I doing wrong?
Dim Contacts As New List(Of Person)
...
' remove duplicates '
[code].....
[Code]...
I build up the ItemList array with the above code. How do i remove any duplicates in this array?
I want to remove duplicate values from a string using VB.NET. If values = "3,40,15,109,15" then I need the end result to be "3,40,15,109". I'm using the code below but receiving the error message 'Value of type 'String' cannot be converted to '1-dimensional array of String' and I'm not sure how to proceed.
Dim values As String
values = lblIDList.Text
'Remove duplicates
values = RemoveDuplicates(values)
[code]....
Value of type 'String' cannot be converted to '1-dimensional array of String'.
2.0 28 Blue (2 14.00 63.0) [2 12.43 54.3] 42111 9275 55111 -1725
2.0 28 Blue (2 14.00 64.0) [2 13.50 55.3] 40611 9275 53611 5775
2.0 28 Blue (2 14.00 58.0) [2 12.21 54.3] 49611 9275 55111 -3225
[code]....
just to finalise this, how can i remove duplicates? i have tried this:
[Code]....
I have the following coding in place which basically edits my text file, however with the information that is shown in the text file I want to remove all duplicates, is this possible?
Dim path As String = "c: est1.txt"
Dim sb As New StringBuilder
Dim sr As New StreamReader(path)
[Code]....
Depending on the data being used, I can have up 10,000 items in each of the 2 ListBoxs. I need to find and remove any Duplicates between the 2.I am currently using the method of select and Item from Listbox1 and search in Listbox2. If I find a match, then remove both items. This goes back and forth until all the duplicates have been removed. This take some time.Currently have the code in Old VB6 and VB2008 Express.
View 5 RepliesI have my code it is able to read a text file and do checks each line if there are 7W and 5L in that particular line, if no matches it will remove that line... 1 problem i face now is that, there are duplicates in my textfile..Im not sure how am i going to remove the duplicate in the text file. I want to know if there is a way to integrate an additional function inside my code to check if that particular line is a duplicate so i can accomplish 2 tasks at 1 time... Since there are about close to 1million records in my text file.
[Code]....
Consider my data table
ID Name
1 AAA
2 BBB
[code]....
Final Output is
2 BBB
3 CCC
4 DDD
How can i remove the rows in the data table using Vb.Net
I have a dropdownlist with some duplicate items on it. I intended to remove them by using LINQ, but do not know how to do it.
View 1 RepliesI have a semicolon delimited string (e.g. an EMail Address List returned from a database or a textbox). How do I separate the string into an array, sort, and remove duplicates? The code below works to separate the string and sort the results, but doesn't remove the duplicates. I could probably then loop through the array and copy to a new array to eliminate the duplicates, but there must be a better way to do this using the VB.Net Array, String, and Collections handling classes.
Dim s As
String =
"Test; Test8;Test1;Test2;Test3; Test8;Test4;Test5; Test6"
[code]....
i have a listbox and i need to remove duplicates (that can be more than 2)
i try this way but doesn't work...
For i = 0 To ListBox2.Items.Count - 1
For j = 0 To ListBox2.Items.Count - 1
If ListBox2.Items.Item(j) = ListBox2.Items.Item(i) Then
[Code]....
the question states im looking to remove duplicates from a textbox in the sense that i have two textboxes like this
[Code]...
My goal here is to remove item 1 and 3 from the first listbox if it exists on the 2nd listbox, ive searched for 30 minutes to no avail, found a similar question on how to do it in vb but still didnt give me a idea on how to do it relating to vb.net also this is more then one instance,
[Code]...
Ok, I found some code online on how to do this, but they only compare the Listview.item.text, and they don't care what is in the entire ListViewItem. Is there any code to remove duplicates in a ListView that checks to see if all the subitems are the same as well and THEN removes the entry? [Code]
View 7 RepliesI started programming Visual Basic .NET a few weeks ago. I wanted to make a tool to remove duplicate lines from a listbox. I have the following
Dim strItems As New List(Of String) 'Make a list with originals
Dim strDup As New List(Of String) 'This list contains the duplicated lines
For i As Integer = 0 To ListBox1.Items.Count - 1
LabelChecking.Text = "Checking for duplicates: " & i & "/" & ListBox1.Items.Count - 1
Application.DoEvents()
If strItems.Contains(ListBox1.Items(i).ToString) Then
[Code].....
I'm trying to make a snippet that will remove duplicate lines from text files. However, I seem to be mixing my for loops up.. does anyone know a simple way that I could do this?
View 7 RepliesI've built a collection list and need to be able to remove one item, I can't seem to find out how to do it,I add to the collection like this
Code:
phoneBookCollection.Add("Joe", "5551234")
phoneBookCollection.Add("Sam", "5551235")
[code].....
I have 10 items in the listview.I have 10 Object of this 10 items in the collection.I want to loop through the collection then remove the items from listview. The index of the items is stored in the 10 objects, and static unchanged.If I use for each loop, once the items has been removed, the index of every item in the listview will changed.(when you remove an item in the listview, the next line item will get shift up a row)How am I going to fix this? if using for each loop, some of them items will not get deleted.Or is it possible to do a "Do Loop" or "Backward For loop" for a type collection?
View 11 RepliesI have a datagridview with two columns a text box and a combo box. I can add to the combo box collection but can't determine how to remove part of a collection. Example combobox has 10 items as follows: 1,2,3,4,5,6,7,8,9,10.
I only want to show a number 1-10 when another label has the same associated number.I have 10 labels named 1-10 but I only want the combobox to display a number 1-10 when the corresponding label has been selected previously. So, if labels 1-5 have been selected by the user than I want to have my dgv combobox to display only 1-5 and remove 6-10. I have searched but have not been able to find a similar post.
I have a nice mouse cursor that I attached to every event on the form and the controls, and I would like it to remain always the same cause some times it changes to cursor appstarting.Is there a way to remove all the other cursor types from the application collection?
View 2 RepliesI have a Microsoft.VisualBasic.Collection where they keys are
"123,A"
"123,B"
Is there a way to remove all keys where they begin with 123?
I am considering a piece of code that will manage access to a collection object from multiple threads - add, update, remove, clear. OK ... so I have put a sync lock within each method, but what is not clear from the MS documentation is exactly how the sync lock is behaving. Is it locking the piece of code it wraps? Or is it locking the object? And if it is locking the object a private static object should lock out any code locked on the object within all instances of the object? i.e. if an add operation is underway, an update, delete or clear will wait for the lock to be released.
Finally, if I have multiple threads contending for the sync lock, how is the release managed? First come, first serve? random (from my p.o.v)? Is there a chance that two separate threads could blunder into 'locked' code simulataneously?