Save layout of datagridview when exit.
That is purpose which i want to execute. i want to use setting in properties of application but i dont know how can i do it.
at the moment, i am using specifing height , width of columns every form load.
I been have some research to this forum about the layout setting save & load...one of the method I found is store it to XML...but it only allow to store textbox value, other like textbox location, size is not work.... it can store every control like textbox, button, label, listview and etc in my form include size and layout and allow to load it?
View 3 RepliesI have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
[Code]...
I have a text box in my application. When I open it, I type "Hello" and then close. When I open it again, the text is obviously gone. Is there a way now to keep the text and any changes in there rather than making the program save a .txt upon closure, and then opening it every time the application loads? Would the same code go for a checked check box, or a certain radio button, data grid view, etc. ?
View 2 RepliesI Have a Windows Form -Personnel form After you finish entering data there is a save command button become visible.this Save Btn works properly with this Function.[code]
View 5 RepliesI have 2 tables : product (as parent) and sales (as a child).
[Code]...
product_id at the product table is pK for product table. transaction_id at the sales table is pK for sales table . product_id at the sales table as fK, which a reference to the product_id of product table All my tables are stored in the dataset. How do I get the data from these datasets can I view on the DataGridView with a different layout formats, as follows.
[Code]...
I would like to know if there is a way to save the text property of a label or any object when i exit the form. For example, if i type in "hello world" in a text box and exit the program, i want "hello world" to become the new text property of that text box when i exit.
View 4 Replieshow do i change the layout of the web form to Grid Layout so that i can place my control anywhere and not follwing lines or cursor
View 1 RepliesIn my form there is a DataGridView, the user select information in the DataGridView then there are text boxes that needs to be filed in. So this is what needs to happens if the focus is on the DataGridView when the user hits the Tab key it moves the focus to first text box. Then once the user hits the last tab box it returns focus back to the DataGridView but to next cell. Initially figured this would not be a problem and did this code;
Dim PreviousCell As DataGridViewCell
Private Sub DataGridView1_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles DataGridView1.KeyDown
[code]....
I'm developing a program using VB 2005.I've tried to use the following instructions to "kill" the application
Application.Exit()
Environment.Exit(0)
(not at the same time)
[code]....
I'm having a bit of a problem getting my application to close properly. Basically I have one main form from which all other forms open. If a user tries to close that main form, I want to bring up a MessageBox asking if they want to exit the application.However, when I try to do that it asks the question twice. It seems that the Application.Exit() is triggering the FormClosing event again for some reason, but I don't know of another way to exit the application. BTW, the main form isn't the startup form so I can't use the option to close when the startup form closes.
View 9 RepliesNow I have a sub to validate a bunch of textboxes and combo boxes.I previously used many IF statements to validate and pop up different messageboxes and Exit Sub in every IF statement.But I heard that too many Exits will decrease the efficiency and they were not recommended to use. Instead, nested IF is better because it will let the process naturally go to the end.Then I found out that if I use nested IF,it will be hard to read, since messageboxes are all separated from conditions.
View 2 RepliesI'm just trying to have my "exit" option in my menu strip remind the user to save their settings...If they haven't, the click "no" and save their stuff, and then exit. I can't get the form to close if I hit "yes."
[Code]...
How to save all the data displayed in DataGridview( 2 column, no primary key) and have a button and
View 7 RepliesHow do I exit from the recursive loop from the code below. I would like to notify the end-user to select a checkbox in a msgBox before I exit the loop.
[Code]....
I have just done my program, just skeleton not completely, the final problem has not been solved up to this time.When I run my application, the Icon of its will be showed at TaskTray. I would like the icon is there when I exit fom of application and then If I double click on the Icon, the application will be showed.
View 5 RepliesI want to save my data from 1st datagridview to 2nd datagridview. I only able to get each cell value from datagridview.
Private Sub dgv_CellClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgv.CellClick
curRow = dgv.CurrentRow.Index
[Code]....
I wish to copy only certain row data when user click on the cell and add in into 2nd datagridview when click button add.
I modified some code so i can edit the data in a access data file. the user clicks on a cell and a new form opens, loads the row into appropriate text boxes and allows the user to edit all the cells and accept them.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim i As Integer
[code].....
I have a program that loads items into a Datagridview from a text file which works just great. I also need an option to edit the fields, and save that into the text file.
The textfile might look something like this:
"Windows7=Tyranlol-PC=111-111-111=18/04/2011=Has Windows 7"
So my application splits that string for each "=" and loads each field into 5 different datagridview colums I want to be able to replace for example "Windows 7" with "Windows XP" via the datagridview.
so i have some code that loads my access db into a datagridview:
vb.net
Dim cnxnString As String = ("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=\SERVERPUBLICVDMVDM.MDB")
Dim cnxn As New OleDbConnection(cnxnString)
Dim sql As New OleDbCommand
[Code]...
but there must be something i'm missing. do i have to loop through each row and update them individually?
I have a datagridview on my form called "mainGrid" and im not very good with XML buti found a small example to load but not one to save I wondered if there was a equally simple way to save! Heres the loading code:
Private Sub loadGrid() Dim ds As DataSet = New DataSet ds.ReadXml("C:x sst.xml") Dim dv As DataView = New DataView(ds.Tables(0)) mainGrid.DataSource = dv End Sub as you can see it is very simple and i didnot have to manually do anything i was wondering if it was the same for saving .
i f puted a datagridview to form 1 and i wanrted when im gone fill the field to datagird to save them but i cant do it i used this code :[code]
View 7 Repliesthe code for these 2 buttons in a datagridview ?
View 7 RepliesI use Visual Basic 2008 I use bound Datagridview I use mysql database If i run this code, everything on the screen ( in the datagridview) neatly Updated.But when I look at records in the table "stock" always the first row (0) of the DataGridView not updated in the table "stock"All the other record are updated with where in the datagridview! This always happens!!!How can fix it?
myAdapter2.SelectCommand = myCommand2
MyBuilder2 = New MySql.Data.MySqlClient.MySqlCommandBuilder(myAdapter2)
MyAdapter2.Fill(MyDataset2, "stock")
MyDataTable2 = MyDataset2.Tables("stock")
[code]....
DataGridView i will like for DataGridView to Save when i close my application and i will also like to Load when i open my application.
View 5 RepliesI am wanting to save row times from a DataGridView when a column button called save is clicked.
here is what i have so far;
Imports System.Data.SqlClient
Public Class Form1
[code].....
please i cann't update or delete or insert into my data base or data set from datagridview. explain it by code by the way i am using vb 2005emergency case.
View 8 RepliesI am trying to save to an xml file using a datagridview. But its giving an error. find my code below.
i am getting this error :"Exception:Access to the path 'C:settings.xml' is denied."
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Try
[Code].....
I have a DataGridView that loads info from an Access DB. The user can change the data accordingly, but how can I make it so the form will save the data that was changed? I know I'll have a SAVE button... but not sure what methods to be calling on the DataGrid
View 6 RepliesI have created datagridview from my datasource using drag and drap. Without any changes it works fine, I can add, edit, delete and save. I added additional queries with my dataset which is fillby. My problem now is if I change fill with fillby the updateall is dosn't work anymore.
[Code]...