I have a block of code which is used to save some information to a text file. I need to use this a few different times in my app.I could just copy and paste it each time but that seems messy and is adding unnecessary code. I'm sure I can just save the code once and reference it when I need to. I think it's done in either a module or a class or something
View 8 RepliesHow can I tell something to use a code without completely adding it in that sub again? I have some code that will be used alot within my program. I could write a DLL, but I don't know how to use those!
Here is my code:
Dim str1 As String = System.IO.File.ReadAllText(Me.OpenFileDialog1.FileName)
Dim s2 As String = str1.Replace(".[1gs5]", "a")
s2 = s2.Replace(".[u775]", "b")
s2 = s2.Replace(".[fsef]", "c")
[Code]...
I know that title is kinda miss leading, but i couldnt figure out another way to explain it. I know theres a way, but I dont know how to do it.Ive got a Save code that I have about 5 differnet times in my application. How do I make it so that I can just type in something like Do Save, and it locates the save code and follows it through, then returns to where it was.
View 3 RepliesLooping code is adding my values multiple times
View 4 RepliesI have written a program and have used it (in debug mode) multiple times to test it out sometimes adding code and/or changing it. After a while any code I wrote or new buttons or features I added to the form would not appear while debugging. I don't know what circumstances led to this.
The only solution I found was to rewrite my code from scratch, however, the problem came back after a while. I don't know what is going on and I can't move on without starting all over again.
I am creating a program where i can fill in a list of open/close times.
In total i have 14 datetimepickers which i set to custom format with hours and minutes.
Every dtpicker has an name (eg mondayopen, mondayclosed, tuesdayopen, tuesdayclosed and so on).
After setting the times right i want to throw everything at once into the datatabse.
Is there some kind of manner to loop through the datetimepickers and insert them into the db or do i have to do them all seperately?
I read the lines from a textfile into a string array and then I use a foreach loop on the string array. I want to go through the same string array again after the loop reach the end of the string array
View 1 RepliesPrivate Sub WebBrowser1_DocumentCompleted(ByVal sender As System.Object, ByVal e As System.Windows.Forms.WebBrowserDocumentCompletedEventArgs) Handles WebBrowser1.DocumentCompleted
[Code]...
So I took this from an example. GetInstance() is called from hundred different places in my program, and when I debug, the line "Prog = New Program" keeps getting hit for each of those calls. Which I thought was exactly what should NOT happen.. Or do I have some fundamental misunderstanding?
[Code]....
It seems the "New" sub triggers a number of calls to Program.GetInstance, before the first one completes. This is due to me earlier having lots of shared public objects in this class, which are no longer shared since the class was made singleton. And these objects, when initialized, calls the Program class for reference to other of it's objects.
Here is my [code]...
My textbox (txtCopies) default value is 1 so naturally, as it is coded above, the datarow is added once into the Movies Table. But what I need to know is how to code if the txtCopies field has a greater integer value.
I keep on getting errors for every line in the code below that tell me that the attributes cannot be applied multiple times. What does this mean and how can I fix it without changing what the code does?
Imports System.Reflection
Imports System.Runtime.CompilerServices
<Assembly: AssemblyTitle("")>
[Code]....
I am doing a project for my company. In that i have to enter the number of items in the first form and in the second form i am going to enter the details of each items. So i have to repeat the second form to get the details number of times depending on the value i have given for number of items in the first form.From the home page i will be entering the values for the master file. after entering the values for the master file then i have to enter the details of the individual item details in a transaction file.
View 3 RepliesI'm trying to loop the inputbox 5 times but I'm not sure how.
Dim payroll1 As String
payroll1 = InputBox("What is the payrolls for store1", "Inc", , , )
Lblstore1.Text = payroll1
I can get it to loop till a specific amount but not 5 times exactly.
i need this option for a textbox. the undo/redo in two separate buttons and it should be for multiple times not just once.[code]
View 21 RepliesI have one Private sub that runs in a loop. I want the sub to run multiple times at once. For example the program runs, you press start; you run the program again and press start, again and again... the same program doing the job at once. now i just want one program do to it alone. But i would like it to be user defined. exp. run program. type in a text box 10. press start. and it works as if 10 of them work open working on the same thing.
[Code]...
Is there any way that I can tell if a second version of the same program is opened by the user.
View 5 RepliesI have a button where I get data from a database that matches a search string I enter. Everything works fine the first time the button is clicked. However, if I click it again with a different search string, I get the same results as the original search string. I've tried to dispose, clear, and reset my dataset before I load the data each time, but it still finds the original query. This is the code I use to get and request the data:
Private Sub btnCfind_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCfind.Click
mdbFile = "TCICUST.DBF"
mdbCond = " WHERE COMPANY LIKE '" & cbCust.Text & "%' ORDER BY COMPANY "
GetDB()
[Code] .....
How can i display (show) the same form multiple times? Lets say Form2. This code only shows the form once: Form2.Show()
View 10 RepliesI have a DGV in VB.Net 2008 connected to an Access DB table. The DGV is not Read Only, but is full of read-only columns except for one, which contains a combo box. The combo box allows the user to select an outcome for that particular row, and then the program copies in a pre calculated value into the "Profit" column depending upon the item selected in the combobox. Then the user hits the Save button and the DB updates (currently via SQL methods in the XSD).
Easy enough so far.
Here is the code.
Private Sub DGUserBets_EditingControlShowing(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewEditingControlShowingEventArgs) Handles DGUserBets.EditingControlShowing
[Code]....
The problem I have is that it would seem that if a user selects the desired outcome from the combobox but does NOT hit Enter, and simply mouses on to a different combobox to again select the outcome for a different row, the first eventhandler is not disconnected and thus the events fire multiple times. This then causes various default MsgBox errors and brings up problems when the user tries to commit all changes to the DB/exit program etc etc.
What do I need to do? Do I need to .EndEdit somewhere appropriate to force the row to save the changes? And where should I call this?
I am trying to programmatically add an unspecified amount of new UserControls to a form. One will be added every time an entry is selected in a ComboBox contained within the UserControl. Problem is, the SelectedIndexChanged event fires completely erratically. Sometimes twice, sometimes 3 times, etc., but never just once. No matter how many times I set the combobox's SelectedIndex to -1, it fires at least once with a SelectedIndex of 0. Sometimes the Itemselected event fires multiple times inbetween SelectedIndexChanged events.
InvoiceEntry.vb snippet:
Public Event ItemSelected As EventHandler
Private Sub cboItem_SelectedIndexChanged(sender As System.Object, _
e As System.EventArgs) Handles cboItem.SelectedIndexChanged
RaiseEvent ItemSelected(Me, EventArgs.Empty)
End Sub
[Code] .....
I have a number of forms which have a common menu strip rather than copy the control onto each additional form is it possible to just call the menu from another form ?
View 3 RepliesI want to search data and then populate on a datagrid. I write the name and I click the button and it does work well, but then if I want to search for another name, I write the new name and when I click the button again the datagrid comes empty. No data at all. I will put my code'[code...]
View 4 RepliesI have a report that displays some sales info. I have a query that takes the data from an SQL Server database and I store it in a dataset. Up to there everything is ok. The problem is that I need to print the same report using Crystal Reports for each row in my query. Is there any way this can be done? I call a form with a ReportViewer tool to display the reports, wich are basic .rdlc reports.
View 1 RepliesIm using a datagridview filter as described [URL].. When the user right clicks the dropdown on the filter twice i get an error "Showdropdownlistbox has been called multiple times before hidedropdownlist".
Im not entirely sure how to avoid this or what the solution to this is.
I know this sounds really bad but I can't seem to figure this out. I am creating a template to use in a form. I have a few buttons that when I click on them will auto type out text into a rich text box. I figured it out for just typing in the text into the richtextbox. richtextbox1.text = "my text goes here" But if I hit the button more than once it doesn't keep adding the text to the rich text box. How can you program a button to enter a text as many times as you click the button?
View 1 RepliesI have a button and various other controls that when clicked, calls as sub. However if the user clicks the button or any of the other controls multiple times, the sub appears to 'stack up'. For example, if I click the button 10 times, and then some of the menu items that trigger it 20 times, the sub would 'stack up' and execute 30 times total. How can I have the sub cancel calls to itself if its called again? I basically only want the latest call to it to count.
Heres code to reproduce it. Just a button on a form.
Dim intTotalTimesClicked As Integer = 0
Private Sub Button1_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles Button1.Click
BlastOfNumbers()
[Code] .....
I want to update a database based on the form that is currently activated. I had originally decided to use the GotFocus event. However I now understand that will not work as the form has controls on it. So I then thought I wouls use the activated event. This works but seems to fire multiple times. I put in the following code:
Private Sub frmNewTicket_Activated(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Activated
MsgBox("Form Activated")
End Sub
I select the form and make it activated and the message box appears about 15 times.Why does it do this? How should I handle this. I only want my code to execute once when the form is activated.NOTE: There are several forms that the users will be changing between, incuding forms from other applications.
I am designing a rdlc report in vs2008 for windows application. I want to display the purchase and sales based on department. If i select one department it works fine but have no idea about how to display each department's purchase and sales data in different tables. I have used embedded resource to the report. Report is designed based on the DataTable(on dataset - xsd file) and which contains, ITEMS,Purchase,Sales and Net as Fields. I have attached an image with describes the format that i want to display.
View 1 RepliesI am trying to use VB 2005 SendKeys.send to fill in fields in a pdf form in a browser (at an online website).The code below works correctly sending keys to Notepad or WordPad, but when I use it to send keysto pages in IE7 or Firefox or even ActiveState Komodo editor I get more than one character and the numberof repeats is variable. For example, if I send "ABC" to a Google page I get AAAAAABBBBC.I have the same problem if I send "^v" to paste from the clipboard - I get multiple pastes.I set my keyboard repeat function to a long delay which did not affect the results.
View 1 RepliesConsider I have a shared function:Public Shared Function CalculateAreaFromRadius(ByVal radius As Double) As Double
[Code]...
If I have two or more threads in the same vb .net app and each of them calls the shared function at the same time with different RADIUS, will they each get their own AREA? I want to know for each call to the function if it is using same local variables or each call creates new instances of local variables?Will the answers to above questions be same If I have multiple (2+) single threaded apps and they all call the function at the same time with different RADIUS value?