VB2010 Sequential Program Versions?

Oct 7, 2011

I am new to the Forum and I hope this is the best location for this thread.I SEARCHed a few threads, but did not see quite what I was after.I am interested in how to make VB 2010 create a NEW COPY of my current project, with a NEW project Folder, New Name, but a copy of all of my forms and modules.

I see that VB 2010 puts my new projects in their own folder in Libraries/Documents/Visual Studio 2010 /Projects.As an example, I am working on a project, and have it a partially completed, partially working mode, and want to save this version before I go on making further additions and modifications to it.

I want the New Version to be the same as the current version, but I don't want any changes made to effect the older version.I could manually copy the current project's folder, but I am not sure what all of the sub folders and files do, or point to, or would otherwise have to be changed.

I'm NOT looking to track each change made in the project. I just want to occassionally have a backup version I can fall back on.I have several VB 2010 texts, but they don't seem to address this question.

View 2 Replies


ADVERTISEMENT

Passing Array Values (sequential) To A Range (non-sequential)?

Jun 12, 2009

I am trying to copy the values to another sheet but not in any sequence eg.A1,B2,C4,D7 ........and so on. I am trying this slick way of doing it by the code below ( found on the web) without success so far but I got a feeling I am close to the solution. I am new to any kind of Programming. This is my first attempt. (so a chuckle or two is ok after seeing my "difficult" problem)

(This is an excel VBA Prblem)
Sub justdoit()
Dim s As Variant

[code].....

View 2 Replies

Getting Runtime Error 3447 - Jet VBA File (VBAJET.dll For 16-bit Versions Or VBAJET32 For 32-bit Versions) Failed To Initialize When Called

Aug 19, 2010

To the board: Lately I've been getting Runtime error 3447 ("The Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32 for 32-bit versions) failed to initialize when called. Try reinstalling the application that returned the error") when attempting to open a certain program (not one that I designed, just downloaded and installed). I installed this program in January 2009, but this error began happening only this past July. someone else to information about the files vbajet32.dll and expsrv.dll. One site said that the problem was probably caused by the file expsrv.dll being absent, but I checked my System32 folder, and it's there. As far as I can tell, it has always been there (the computer was made in 2008, and as I said the program had always worked before). Vbajet32.dll is also there. I tried uninstalling and reinstalling the program, but error 3447 still occurs. I also tried uninstalling the program and installing an older version, but 3447 is still there.

I tried replacing expsrv.dll, thinking it might have been corrupt, but that didn't help, and I cannot register that dll anyway. I can't figure this thing out. Both of the files are there, and I didn't change any settings or anything anywhere between last January and this July. By the way, I am on Vista.

View 1 Replies

VB 2008: Publish Two Versions Of The Same Program?

Jun 15, 2009

I have two slightly different versions of my VB applications that I would like to publish simultaneously. The differences are minimal and mostly include GUI and some internal logic. Incorporating changes into a single application is not an option right now.

I tried publishing and installing them separately but the latest installer always overwrites whatever has already been installed. For example, if I install App v1, then App v2, only App v2 will be visible. If App v1 is installed after App v2, only App v1 will be visible. What I want to have is to have them both installed. I am using Visual Studio 2008.

View 1 Replies

VS 2008 : Make A Program That Works With Multiple Versions Of Microsoft Office?

Mar 3, 2010

What is the best way to make a program that works with multiple versions of Microsoft office? I own office 2007, so my program uses the office 2007 com objects. When I try to use my application with office 2003, I get errors related to the com objects. Does Microsoft have com objects that are compatible with multiple versions of office?

View 2 Replies

Create A Stand Alone Program With VB2010?

Sep 12, 2011

Is it possible to create a stand alone program with VB2010?

I mean, without any presence of an OS, the program will still work...

View 13 Replies

IDE :: VB2010 - Creating Solutions After Program Has Been Debugged?

Jan 26, 2010

In VB2010 Beta 2, after program development, how do I deploy (or create a solution to), programs I have written? Also, how can I change the folder where VB 2010 looks for my help documentation Hope someone can help. I've been an on-again off-again programmer for years, but 2010 just makes my head spin a little...

As far as the solution creation, I've already tried clicking on Project-->Publish, which more or less seems like it wants to upload to a website rather than be stuck on my HD... I don't want to upload to the web;the whole reason I want to export is that I want to think I remember at one time having read something about the about box labels only displaying the new information you stick in them once the program has been turned into a .exe file, but I'm not sure; although now that I've run into this problem of creating solutions, even w/ this little bit of a program (nowhere near complete, something like a sure-to-be-crappy-take on Mass Effect 2.. it's primarily text based); heck, for that matter just about all I write programs for is because "hey.. it's enjoyable... umm... kind of" -- I originally started in college as a Computer Science major, switched to Music, transferred schools, the school I transferred to didn't think I had the skills they look for in incoming students, and from there switched to spanish major.

____, just about all I'd be good for is playing music and localization projects (both in and out of the game industry). Not so sure I'll get anywhere, but I said "what the heck, I'll upload my resume to EA".

View 1 Replies

Inserting A 1 Second Pause In A VB2010 Express Program

Nov 22, 2010

Is there a command or couple of code lines that will pause the running program for one or two seconds?

I have a program that checks the system time every 250milliseconds and I need to skip checking it three times the first time it comes back with ":00" seconds from the system clock.

Or another option would be to reset the timer to 1000 and then back to 250...

View 3 Replies

Get Info From A Scale Using An RS232 Cable Into A VB2010 Program

Oct 28, 2010

So I am trying to get info from a scale using an RS232 cable into a VB2010 program. But before we even start talking about that, I don't know ANYTHING about serial ports. I need to learn how to get the data from the scale without programming first... I am using Win7. I do have a sample program (w/ source) I downloaded [URL]) It runs without any errors, then I have a big USER error, what do I push? How do I tinker to figure out the right settings on this interface? or any interface. These are the sittings for the scale: [URL] I am considering returning my scale and getting something with maybe USB on it, I need to be able to weight things up 100lbs, I am shipping car parts.

View 8 Replies

Make A Program With VB2010 That Does Not Use The Actual Form But Instead Only Uses Other Components?

Sep 19, 2011

Is it possible to make a program with visual basic 2010 that does not use the actual form but instead only uses other components (e.g. Message Box) to form a complete program?

View 2 Replies

Vb2010 And Access Database Error In Program Files?

Nov 5, 2011

I finished my application whith vb2010, this application uses a Access database. I have a problem because when I install my application he put database in de same path "program files" and this path is only read And my application crahed. I know how to installer put database in other path but I don't know how to tell my application to find this database,

View 4 Replies

IDE :: Open A Program Written VS 2008 In VB2010 And Get Security Error

Sep 6, 2009

After upgrading code to VS2010, the error "MSB3134: The permission set requested by the application exceeded the permissions allowed by the Internet or Intranet zones. Select Full Trust or to continue using partial trust, define your custom permission set in the Security Page of the Project Designer. Bentley Software Loader". The same code ran fine in VS 2008

View 3 Replies

VB2010 Create A Product Expiration Date Reminder Program?

Feb 1, 2012

I have database in MS Access and this is Embedded to my program in VB2010 this is a Product Database now I try to create a reminder about my product expiration date

View 6 Replies

VB2010 Using Arrow Keys To Move A Shape Also Changes The Value Of Trackbars Elsewhere In The Program?

Jun 30, 2011

Using arrow keys to move a shape also changes the value of trackbars elsewhere in the program?

View 7 Replies

Vb2010 - When Debug The Program Error Says ExecuteReader Requires An Open And Available Connection

Aug 2, 2011

I have o problem on my codes sqldr = sqlcmd.ExecuteReader when i debug the program error says ExecuteReader requires an open and available Connection. The connection's current state is closed. i dont know what its means that error..

View 1 Replies

What Is A Sequential File

Oct 13, 2009

My teacher as asked me to allow a user to input three pieces of information about a DVD (the ID, the title and the running time) and for the program to add that data to a sequential file. My textbook fails to explain it and I am at a loss as to where my book from last semester is located at the moment.

1. What is a sequential file?

2. How do I display information from it into a messge box?

View 3 Replies

Array Subscript Have To Be Sequential?

May 6, 2009

First... does the array subscript have to be sequential? (0,1,2,3,4) Or could I pull the system date and use that? i.e. dim Beer() could have Beer(33939) for today, and then not record anything for three weeks and the next entry would be Beer(33960), etc.Along the same lines, and pointless if the answer above is yes...I'm writing a prog to handle inventory for a bar. The bar has 230 different beers at the moment. Could I create a 2-dimensional array using a product number, date for the subscript?

i.e. - for received data... recBeer(a,b)recBeer(229,33939) = 48(Meaning 48 bottles of beer #229 arrived on date 33939)SO... a is the product, b is the date. Any searches for (229,*) would provide me with the complete history of that product being received. any searches for (*,33939) would tell me all of what was received on that date.Will that work?(And yes, I'm stuck with a flat file to make this work. Much rather have a db involved.)

View 1 Replies

Arrays And Sequential Files

Feb 13, 2010

i am coding an application where I want to populate an array with the contents of a sequential file that is already populated as salary.txt in the debug folder. Basically, I want to copy the contents of that file to an array so that I may use a code to go with the intSubscript of the array. Right now it functions as just an array for this purpose, but I want to populate the array with the sequential file first. All attempts to do this, with stream writer etc and readline, I am just getting the first item in the file. I have tried to loop it and still only the first is accessable. Driving me batty, turning to the masses for guidence.[code]

View 1 Replies

How To Check For Sequential Numbers

Jul 9, 2009

I have a working piece of code that checks that 4 out of 5 random numbers are in sequence. The numbers correspond to 5 dice rolls. I'm trying to learn VB and I think the code can be improved since it's so cumbersome. The sub checks to see if any of the numbers are duplicated and reassigns one of the duplicates to an arbitrary "11" which is outside of the 1-6 range of a single dice roll. Then the values are inserted in an array and sorted and the sequence check takes place. score of 30 is assigned if 4 of 5 of the (sorted) numbers are in order. If not in order, a score of 0 is set.

Code follows:
Private Sub OtherScores4()
'Check if any of the rolls are duplicated and reset one of the die to arbitrary "11".
If Dice1 = Dice2 Then
Dice1 = 11
End If
If Dice1 = Dice3 Then
Dice1 = 11
[Code] .....

View 3 Replies

Reading Sequential Files?

Mar 2, 2010

I am suppose to create a module level array name Product and populate a list box with the contents of a file (ItemInfo.txt) The file contains the Item ID and price of the item. (Line 1 is an item, Line 2 is a price for Line 1, Line 3 is an item, Line 4 is a price for Line 3, and so on.) The problem i'm having is when i populated the list box, I only wanted to populate the list box with the items, not everyline from the file. I guess I wanted to put elements [0], [2], [4], [6], and [8] from the Product array in the list box, but I am putting everything in there. What am I missing?here is my code so far:

' Name: Glovers Project
' Purpose: Displays the price of an item
' Programmer: <Paul J. Williams> on <February 27, 2010>

[code]......

View 2 Replies

Recording Sequential Updates?

Jun 16, 2009

My project uses an MS Access Database, and amongst other things records the current cost of a series of categories which are regularly updated, thereby erasing the previous entry. However, I need to retain all previous costs to produce a history graph for given periods. I have considered importing an Excel spreadsheet, but having a functioning database it seems sensible to use it.

View 4 Replies

Sequential Access File In VB

Apr 27, 2012

I am working on a program in Visual Basic that incorporates using a sequential access file for a ballot type program. Each type the user clicks the save vote button, the amount of votes gets stored.

What I am trying to do is in my access file is to display the number of votes as an actual number. The way my program is written right now, the name of the candidate appears as many times as the vote was saved.

for example, if perez was voted for 4 times, in the access file perez is displayed on 4 different lines. How do I display the actual number of how many time they were voted for. I'm thinking using a counter variable, but not really sure how to really implement it in. this is what i have so far.

[code...]

View 1 Replies

Sequential Search In Arrays?

Nov 14, 2010

I am making an application that requires a sequential search to search the arrays. The search searches the user's input in the array,and if found, then it's valid, else it's invalid. I have initialized the array and done the sequential search, but apparently even the wrong input is coming out to be valid.

'initialize an array
Dim intChargeAccounts() As Integer = {5658845, 4520125, 7895122, 8777541, 8451277, 1302850, 8080152, 4562555, 5552012,
5050552, 7825877, 1250255, 1005231, 6545231, 3852085, 7576651, 7881200, 4581002}

[code]....

View 8 Replies

Way To Generate Sequential Number

Apr 21, 2010

How i would generate sequential number in vb.net.[code]...

View 18 Replies

Converting Between Versions Of .Net?

Nov 13, 2009

I unfortunately downloaded and installed Visual Studio 2010 and upgraded all my programs to .Net 4. I am really unhappy with the way 2010 runs. My computer keeps locking up for hours, programs take a long time to compile... Those are a couple of major issues.

View 3 Replies

Have Multiple Versions Of VS On PC

Mar 2, 2009

I thought would be a simple google search but apparently I am not searching correctly - or something...

Does anyone know if I can do this? I would like to start working with 3.5 however all the projects I am doing are still in 2.0

View 8 Replies

VS 2005 Different Versions Of Dll's?

Dec 22, 2010

I am developing a plugin into a third party control. They ship a SDK dll with their application to allow you to do this. However I am writing the plugin using version 1.1.0.0 of their SDK, but when trying to run the application on a clients machine that has a new version of the software the SDK version is 1.4.0.0 and my app throws the following error:

System.IO.FileLoadException: Could not load file or assembly 'MyDll.dll, Version=1.1.0.0, Culture=neutral, PublicKeyToken=764d581291d764f7' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

When the dll is referenced into Visual Studio I have changed the Specific Version property to false, however this has not made any difference. The dll is not reference from GAC.Is there a way that I can tell my application to just use the version of dll that is on the users machine? I have checked with the 3rd party vendor and the functionality that I am using has not changed in any of the versions as they use a back-ward compatibility approach to their software.

View 1 Replies

Create Sequential File With Path?

Jul 1, 2010

create sequential file with path?

View 1 Replies

Dates To Show Up Random Not Sequential

Apr 17, 2009

I'm working on my graduation project and within it i need a function gives me random dates since 2008,01,01 untill now. I want the dates to show up random not sequential.. how can I do this ????

View 1 Replies

Getting Error Reading A Sequential File

Apr 15, 2009

I am making c++ write a file to a folder of my choice in which it prints out my scores from a math test that c++ gives me. The problem is vb is kicking an error out

"Value of type 'String' cannot be converted to 'System.Text.Encoding'.

All the file is, is a simple .txt file named math_scores.txt that cpp outputs[code]...

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved