Ok every so often in .net (when i have a project that references another project in the one solution, and i add a breakpoint to the "non-startup" project) I get the following message:"This breakpoint will not currently be hit. The source code is different from the origional version"I tried to remove the reference from the project and re-add it from the other project in my solution - this did not fix the problem.
View 4 Replies
The other night i was reading an article on preventing reverse engineering and i found out that you can check to see if their has been a break point that has been added into your applicaiton.How would i check if their has been a break point added?
View 2 RepliesCODE:
I get like bunch of msgbox and when i break point the timer dosn't go to the end it just reach to the msgbx and then repeat again from the beginning , i dont know why, i removed the timer and made new one but still the same problem.
I was using a break point in this method to make sure every was running right with it. Basically it is a loop to read until the end of a stream but rwNumber resets after it gets to line 50. Does objreader.read have a limit on it i am not sure.
Public Sub FormatText()
Dim filePath As String = openFileDialog1.FileName
If filePath = Nothing Then
MessageBox.Show("You have not opened a file yet")
[Code] .....
[Code]...
I am getting an error in above line says: objrpt is not declared it may be inaccessible due to its protection level I agree it may be inaccessible if the condition doesn't met - but here if it doesn't met it will take CrystalReport2 know ?
I hve been working with points a lot recently, and I have been wondering if there is a way to set a point without setting point.x and point.y separately. For example for (3, 5): Point1 = (3, 5) But that isn't right
View 4 RepliesSo I have some vb.net code, and I have a nested For loop inside a For loop, and then I have EXIT FOR statement, will it break out of one loop, or the whole chain?
View 2 Replies-new Dell laptop without a Break key.
-VB6 and VS2008 IDEs use Ctrl+Break to pause execution for debugging.
-I need a way to map another key combination to trigger a Ctrl+Break
My setup may make this easier or harder but to be clear I am running Kubuntu 9.10 (latest stable) and WinXP in a VirtualBox VM. Obviously all VB6/VS2008 dev is taking place in the virtual machine.So maybe it's possible to have the linux host send through Ctrl+Break based on a key mapping, or maybe it's possible to remap directly in WinXP. I'd settle for any solution as atm I need to use the XP On-Screen keyboard to send a Ctrl+Break.
I am new to VS 2008 but have used VB6 for years. I want to be able to run my program in the IDE but when a Msgbox displays a message I want to stop the program and see the MsgBcode. I am using Windows 7 and VS 2008 professional on a 64 bit machine. How can I do this? Do I have to install a 32 bit version of VS 2008?
View 2 Repliesi have very big data in one string variable, how i can break and put in several variable? [code] It is very big this is a content of real time video.i need to break in multi variables according to the length = 255 once increase 255 it will break and put in new variable.
View 4 RepliesI have a Diagonal line drawn on a picture box on my forum and i need to know if the user has clicked the line I have the Start point and End Point of the Line and the mouse x,y location So i basically need to find out if the x,y of the mouse is on the line.
View 2 RepliesI understand the concept of rounding I guess, all I know is math.round(), but I need a break down of it so I can round a number like this: 14.789543 to this: 14.8 because after the 7 there is an 8, which means you would round the seven up. Can anyone tell me how this is done?And some more detail, I need to round to the nearest tenth.
View 9 RepliesI can't figure out how to get VS to break only on unhandled errors. I've tried this checking the "User-unhandled" box and unchecking the "Thrown" box for "Common Language Run-time Exceptions" and I've tried checking both boxes, and I've tried checking only the "Thrown" box, and I've tried unchecking both boxes.VS either completely ignores all run-time exceptions or breaks on both handled and unhandled run-time exceptions. Is my VS 2008 IDE broken or am I missing something?
View 5 RepliesI have a problem when i want to E&C on break mode.I turn off Optimized code generation but i still haved the problem!Here, Build>Configuration manager, when set configuration to release, i get an error like "Changes are not allowd when the debugger has been attached to an already running process or the code being debugged was optimized at build on run time". in Other Side when set it to debug, the breakpoints not be hit and have a error like "The breakpoint will not currently be hit.No symbols have been loaded for this document".I use Win7 x64,Visual studio 2008 and also set my project's platform target to X86?
View 4 RepliesI have a class with a lot of methods. This class and methods are in one file. These methods can be put into 3 groups based on the things that they can be used for. What would be a good way to break these methods up into the 3 groups? I was thinking about doing a partial class definition and breaking up these methods into 3 files.
View 3 RepliesI'm trying to extract a piece of text from within the string, defining both a starting point and an ending point. For instance, say I want to search for the text found between "That is a " and " car" in the string "That is a red car", so it would return "red".I know you can use .SelectionStart and SelectionLength, but the length of the word can change, so the selection length can vary. What I want is to establish a specific starting point and a specific ending point from which to extract the text from the string.
View 5 RepliesI'm having a slight issue and I've been Googling for ~3 hours now but to no avail like my other 2 questions of which the answer was obvious.t will probably be obvious again.Anyway, I want to colour everything after the String 'text2' in RichTextBox1 until the end of the line.'ve been playing around with it a bit but I couldn't get it to work.
Sub:
Private Sub ChangeColourOfWord(ByVal wordRE As String, ByVal Colour As Color, ByVal wordRE2 As String, ByVal Colour2 As Color)
[code]......
I am trying to write the following application. A project has initial investment, yearly revenue and yearly expenses. The program should be able to take these data and calculate the break-even year, i.e. when the cumulative profits become 0. Also, it should have a listbox that would list the cumulative profit for 10 years. Refer to the example below. Now I know how to show it in the listbox but I am having trouble showing the break-even year. I know how to calculate it but how do you show it in years.
View 8 RepliesI want to know if its possible to loop in a variable and grab info from point a to point b
This is what I have stored in my Variable
PHP
</div> <!-- div reviews end white-space:nowrap; margin-bottom:5px; class="reviews" -->
<div class="list_address">
[Code].....
i have a picturebox which displays a map i have 2 modes add point and delete point when the user clicks the picture it creates a point on the picture where the user has clicked that works perfectly its when i try and delete the point when it doesent work :/ i have all the points loading from an xml file this is the code i have:
[Code]...
basicly i want it to when the user clicks the point it fines the x any y in the xml delete the node then delete all the points on the map then reload them all according to the xml
I'm trying to calculate the direction between two points on a two-dimensional grid. Actually I want to determine if that vector is within a range of two values. Suppose the grid's origin is 0,0 at the upper left corner, and 0 degrees represents north. I have a point A on that grid. I want to know if a line from point A to point B on the grid is within a range of directions between 111.8 degrees (a little south of east) and 158.2 (a little east of south). Those are approximations; the 111.8 is 90 degrees plus the arctangent of 2/5, and 158.2 is 180 minus that value. I worked out a series of calculations worthy of a medieval astronomer, but I suspect there is a simpler way. I'm going to have to do this for a variety of other vectors, and I'd like to generalize
View 4 RepliesI know how I can construct an icon setting point by point, but that isn't what I want. I want to use a bitmap file or a jpeg -is easy to convert an jpeg to an bitmap- and built an icon that looks like this picture.
View 2 RepliesI want to make a drawing application which needs a few drawing functions I cant handle myself as im not very mathematicly inclined The first on the list of functions is to create an arc from a start point, end point and radius. The method signature is as followes.
Function CreateArc(byval StartPoint as PointF, EndPoint as PointF, Raduis as single) As PointF()
'Code to create an array of points...
[Code]....
I have a DataGridView that will occasionally have a RowError icon displayed in the RowHeader (shown below)I have code that displays a small form when the users mouse moves over the row header or clicks the row header.I would like to draw aline from the top-left of the form to the middle-right of the row header.I basically want to point from the form to the error icon.
View 1 RepliesI need to move an ellipse from a known point on the screen to another known point on the screen.
I've tried using For.....Loops with less than desired results.
I can't remember everything I've tried, a lot of trial and error has been layed to waste. Lol
I've ended up with this code after putting together what I've tried, what I've learned elsewhere, and a couple of posts I've read on here.
All I want to do is move the ellipse from one point to the other along a straight line that forms the angle between the two points (X1,Y1) and (X2,Y2), make it grow from 2 pixels at it's start, to about 80 pixels by the time it reaches half way, then shrink from 80 pixels back down to 2 pixels by the time it reaches the point (X2,Y2).
Easier said than done.
Here's what I have at the present.....
Dim W As Integer
Dim H As Integer
Dim Num As Integer
[Code].....
....This seems like such a simple task, yet it's been a week since I came up with the idea, and I've had little success.
come out with the codes for moving the mouse pointer from point (200, 100) to point (300, 400), repeatedly. Using VB 2008.
View 8 RepliesI looked around the forum can't find something really simple.I want to scrape everything between the
<!-- google_ad_section_start -->
to
<div class="ad_editorial-sponsorship"></div>
copy it and use it right after it's website and I navigate using webbrowser1.
i want to work on a shooting game,and i already have a code for the rotation of the image but i have a few problemFirst problem(for the tank /ship): i want the image to AUTOMATICALLY rotate facing the mouse cursor,i know how to rotate but but i dont know how to convert the location of the mouse to an angle that the image will face,,
View 1 Repliesof a tcp server/client project example so that I can make my won tcp chat or something.
View 2 RepliesI was wondering how i can get as far as the second point in a Double. I have a double that will contain a number such as 12.98 but when i try to show it in a textbox it shows as 12.98000000000000000 I know this is because its double but im unsure about to to retrive only as far as the .98 and get rid of all the 00000000000000
View 2 Replies
