CODE:
I get like bunch of msgbox and when i break point the timer dosn't go to the end it just reach to the msgbx and then repeat again from the beginning , i dont know why, i removed the timer and made new one but still the same problem.
Ok every so often in .net (when i have a project that references another project in the one solution, and i add a breakpoint to the "non-startup" project) I get the following message:"This breakpoint will not currently be hit. The source code is different from the origional version"I tried to remove the reference from the project and re-add it from the other project in my solution - this did not fix the problem.
View 4 RepliesThe other night i was reading an article on preventing reverse engineering and i found out that you can check to see if their has been a break point that has been added into your applicaiton.How would i check if their has been a break point added?
View 2 RepliesI was using a break point in this method to make sure every was running right with it. Basically it is a loop to read until the end of a stream but rwNumber resets after it gets to line 50. Does objreader.read have a limit on it i am not sure.
Public Sub FormatText()
Dim filePath As String = openFileDialog1.FileName
If filePath = Nothing Then
MessageBox.Show("You have not opened a file yet")
[Code] .....
[Code]...
I am getting an error in above line says: objrpt is not declared it may be inaccessible due to its protection level I agree it may be inaccessible if the condition doesn't met - but here if it doesn't met it will take CrystalReport2 know ?
Is it possible to use a timer to delay code? For example:
[code]...
Everyone knows of the yellow triangle with a exclamation point in it on a message box. I would like to use that same image on one of my forms. Is this possible? If so, how do I do it?
View 8 RepliesQuick question - if I have a timer set to 5000 (5 seconds) and the code in the timer takes longer than 5 seconds to run because of sql stuff, will the timer wait until the code is done till it fires again?
View 3 RepliesI hve been working with points a lot recently, and I have been wondering if there is a way to set a point without setting point.x and point.y separately. For example for (3, 5): Point1 = (3, 5) But that isn't right
View 4 RepliesI recently completed my first book and am looking for a project to create. I want something simple that has a bunch of different features in it. Can anyone recommend a good project? I am going to try tic-tac-toe.
How do you set a location from source code? I tried : button.Location.X = button.Location.X + 10
the timer dosnt work if i checked the checkbox. [code] this is how the program looks like
View 38 Repliesi'd like to print bar codes with page break after each bar code, below is my current codes.
[Code]....
I need a code wich break
If
x = DialogResult.Cancel Then
ElseIf
x = DialogResult.Yes Then
[code]....
This timer code is for VB6 and worked fine, It's to change the timer seconds into minutes, I'm not sure how to make this work for 2008 though.
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Interval = 1000 ' set timer to 1 sec intervals.
Timer1.Enabled = False ' timer is off
End Sub
[code]....
the errors are...
Error1Name 'StartTime' is not declared.
Error2Name 'MinutesToWait' is not declared.
Error3Name 'StartTime' is not declared.
I created a small vb.net console app in visual studio 2008 trying to learn .net but my results show differently when I break in the code and press F11 to step through. If I do it this way, the results I expect to get show but if I don't break into the code the results aren't what I'm expecting.
Basically everytime I click a button i want to write four numbers that are random. If I break into the code, these show random numbers i.e. 1 3 4 3 but if i don't break into the code. my numbers are all the same i.e.1 1 1 1. Here is my code, like I said I'm still learning so the logic is probably not correct.
[Code]...
I want to do this:
lblQuestion.Text = "Text (insert line break) More Text"
We can reproduce it to the point it happens whenever we click Tab, but short of putting a break point at the beginning of every method in the project to find out what is executing.
Is there a way to set visual studio to break whenever anything executes?
I am writing a Direct Sound application and I am getting a warning that the functionality that I am using is obsolete and to use different functionality. However, when I try it, I get a compile error.
I am using VB on Visual Studio 2008 and .Net 3.5 .
[Code]...
When I am in break mode, I cannot update code.I receive message "Cannot currently modify this text in the editor. It is read only." Can anyone explain why I get this message?
View 1 RepliesFrom my initial readings on unit testing it is wise to put all of your setups and tests in a separate project from the code being tested.I've recently begun reading The Art of Unit Testing, trying to discover how to break dependencies on things such as database calls.The methods offered involve changing areas of the test code, such as adding specific interfaces and "stub" methods to the production code.This seems to defeat some of the good things about keeping tests and production code separate.Is there any recommended dependency-breaking technique that doesn't involve changing production code?
View 3 RepliesOut of curiosity, is there a way i can make a program stop or pause for a period of time (which i would choose) before continuing the code WITHOUT a timer.I think I've seen this done before, but I'm not positive.Also note that I'm talking about a forms application (not a console app if that would be any different.)
View 3 RepliesThere has to be a setting for this somewhere, but for the life of me I can't find it. When I "Start Debugging (F5)", if there is an issue with my code, I get a "Build Failed" notification, in the lower left of my screen. I would like to be directed to the location of the failure. So far I have been lucky and have been able to find the offending code but this is getting scary .
View 2 RepliesI have a 3 questions that I would like to ask....
I have made a kiosk type software (for my 7 year old daughter so she can only do what I want her to do on one of our computers)
1. I have a toolstripcombobox that will be where she puts in the url's. I need information on keeping the history of where she goes? So when she clicks the arrow to the right it lists all the sites she has been to.
2. Right now, the webbrowser navigates to where the url is (www. vbdotnetforums.com), but when you click a link it dosn't update the textbox with the new url [URL]. It just stays at the first url.... Anyone know how to fix this?
3. Any help being able to add tabs and load the tab with the url like internet explorer?
So I have some vb.net code, and I have a nested For loop inside a For loop, and then I have EXIT FOR statement, will it break out of one loop, or the whole chain?
View 2 RepliesCan someone tell me how to stop the output of this code from placing a page break after it finds the selection.It's placing a blank page at the beginning and end of every printout.I suspect it has to do with the insert.break method, but cannot figure out what needs to be changed. [code]
View 2 RepliesI have a code that uses WPF Interoperability where I have WPF Item that is being added as user control in windows forms. I use the WPF for 3D view where I add a sphere dynamically and it works fine, all I do is just send x, y and radius from the form to WPF and it draws the sphere.
Now here it is the problem I made a loop that reads list of coords and draws them in WPF control, it works perfectly if I add a blank MsgBox but if I remove the MsgBox it only shows the last sphere in the list, Eg For Each obj As Sphere in LstSpheres. MsgBox("") 'If I remove this the code doesn't work. CreateSphere(obj.x, obj.y, obj.radius, Brushes.Red) 'This Sub adds the Sphere in WPF Control Next
How is that possible, and how can it be fixed?
UPDATE:
CreateSphere
CODE:
-new Dell laptop without a Break key.
-VB6 and VS2008 IDEs use Ctrl+Break to pause execution for debugging.
-I need a way to map another key combination to trigger a Ctrl+Break
My setup may make this easier or harder but to be clear I am running Kubuntu 9.10 (latest stable) and WinXP in a VirtualBox VM. Obviously all VB6/VS2008 dev is taking place in the virtual machine.So maybe it's possible to have the linux host send through Ctrl+Break based on a key mapping, or maybe it's possible to remap directly in WinXP. I'd settle for any solution as atm I need to use the XP On-Screen keyboard to send a Ctrl+Break.
I've recently started programming for Visual Basic Express - 2008, and I'm currently trying to make a program which takes a bunch of inputs (Name, Age, x2 score results) and then turns this into an output at the end which varies depending on the score results.
I've stumbled upon a small hinderance, which is that the very final stage which has a Console.Writeline does not appear after testing the program. So, everything else functions fine, but as soon as it gets past the "Console.WriteLine("All pupils have been calculated, the results are...")" command the program closes itself.I'm not looking for much help, just wondering exactly what is causing this to happen. I also realise that my coding is sub-par and is coded in a slightly odd fashion, but I'd rather just get this one to work and use the mistakes from this one to correct my future work.
if its possible to have a msgbox cleared without having the user do it manually? what would be my best option here?
View 8 RepliesI would like to covert a 4 digit hexadecimal code point to UTF8.
For example:
4e00 to δΈ€
Dim s1 As String = Char.ConvertFromUtf32(&H28E02)
I don't think they are built for my 4 digit code though.
