VS 2008 : How To Pause A New Processes
Jun 15, 2011how to pause a new processes, like gateway, but in real time.i want to make like process gateway [URL]tx before..
View 2 Replieshow to pause a new processes, like gateway, but in real time.i want to make like process gateway [URL]tx before..
View 2 Replies1) Why the pause button and also the pause command does not exist in VB 2010 Express?
2) I have some solutions under 2010. In 2 or 3, while debugging, I can change instructions without restarting the application. In others, I cannot change anything (Is like readonly), Looking in 'My Applications', Tab 'Debug', Option 'Configuration' I can choose several Options. In the applications I can debug, the default is 'Active (Debug)'; in the others is 'Active (Release)'. If I change the options, the word 'Active' remains attached to the original option.
I have an app that I'm debugging and I need to pause it by clicking on a "pause" button in the development environment. I don't want to stop it programmatically, just manually to check what it is doing. I know this should be simple but I can't find a pause button anywhere on the toolbar.
View 4 RepliesWanting to do something like this:
VB.NET
Private Sub MaximizeCare()
For Each p As Process In Process.GetProcessesByName("clinical_carestation")
ShowWindow(p.MainWindowHandle, SHOW_WINDOW.SW_MAXIMIZE)
[code]....
But the trouble is that if multiple users are using the same terminal I cannot narrow down the process list to just the current user. So if two users run the same application simultaniously only the first user can open the application on the same terminal.
I'm extracting icons from running processes and then adding them to a ListView. Some processes don't have icons or I can't get access to them, so the icons are sometimes all mixed up. The following is how I'm extracting the icons:
[Code]...
was wondering if it was possible to write/read from a programs memory inside of your visual basic 2008 application. I've done tons of research and "googled" everythingt to be able to read/write values of a running process from with my application.I did read somewhere that you can only read/write up to 4bytes in vb.net, That would be just perfect
View 6 RepliesWhen I close my program, it stays in Processes? Is there any way I can make sure it does not?
View 12 RepliesI know this is doable in C++, but I have no idea if it would be doable in VB.NET/C#. This is the C++
DWORD ModuleHandle = ( DWORD ) GetModuleHandle("Module1.dll");
int AddressToEdit = ModuleHandle + 0x12345;
BYTE Buffer[1] = {0x00};
WriteProcessMemory(GetCurrentProcess(), (void*)(DWORD)(AddressToEdit ),&Buffer,1,0);
Is it possible to edit the memory of a Processes' module?
Im wondering if there is some way of monitoring individual processes (read: not mine) cpu usage and ending (asking politely then killing it off) the offending process. I dont know about you, but i've been in multiple instances where i've been unable to get to taskmanager to "choose" process to be killed. For multiple reasons (Either taskmanager has been visible, but a game window is still showing (alt+tab not working), leading to a guess game of clicking processes or cpu usage has been so high that one mouseclick takes 30 sec.)
[Code]...
For some time I've been trying to devise a system that would allow me to keep a large quantity of data stored in memory, which is to be accessed by a main process that I must start and stop a lot. I've tried using a virtual/RAM drive on which to store the data files to speed up data loading when starting the process, and also tried keeping the data in a windows service and using WCF for IPC between the main process and the service to access the data. Both those approaches were WAY too slow.Currently the main process stores the data in tables, and that serves my purposes well once the data is loaded. One thing that I'm wondering is if maybe it would be possible to "orphan" the DT objects by the main process and "adopt" them by the service when the main process is shut down, and do the opposite when the main process is restarted. That would obviously be pretty efficient.Is there any way of doing this in VB.Net without any non-managed code help?
View 4 RepliesHow can I do a function, pause my thread for half a second or 1 second then do another function like for a random example.
Timer1.Start
'Pause for half a second
Timer2.Start
I have a loop and I need that at the end of each step of the cycle that it sets in pause for a few secondsHow?
View 3 RepliesI have a loop and I need that at the end of each step of the cycle that it sets in pause for a few seconds How?
View 5 RepliesI am moving a lot of data to MS Excel from my application. I use a conditional statement to choose which Excel page the data is transferred into. Then a For Next statement to divide the data into various areas on the Excel sheet.The first sheet will always work correctly, but on the next conditional statement to chose the next Excel sheet no data transfers when running the program. If I step the program by hand all data all code works fine. I believe I need to pause between the conditional statements but I have been unable to get one to work.In the following code I have been trying to get a pause between to conditional statement to no avail.
[Code]...
Right now in my app I have a Pause and a Continue button, basically I enable/disable the controls on the form. Is there a better way to handle this.
Is there a way to lock the cursor in the control that it is in when the Pause button is clicked and then release it when the Continue botton is clicked?
how to play/pause mp3 anad wav sound in visual basic 2008?
View 1 RepliesI have a thread running on my application that checks a database every so often to decide whether or not to update nodes in a treeview.
Each treeview node represents a document and I have an open button that opens the document for the user.
When the document is opened, I wanted to suspend the thread that refreshes the node list until the document is closed.
I have MyThread.Suspend and MyThread.Resume. But the document viewer is on another thread.
I created functions for suspending/resuming the thread in the application. I have delegates in the viewer to call those functions from another thread. But I'm still getting an Error. "Thread is not user-suspended. Cannot be resumed" or something of the like.
But I realize that Suspend and resume are obsolete functions, so what class or objects should I be looking into and if it didn't take up too much of your time, a small example as well?
Is there a command in vb that can be used to pause a routine to give time for the form to show before the routine starts as my routine is running and completing before my form shows up?
View 13 RepliesI have populated a ListView with currently running processes and with the help of JMC, been able to highlight specific rows based on memory consumption. However, I've decided to change it up a little bit and change the color of rows based on whether the process is owned by the User, if it's a System process, or if is a Service. I've already been able to determine if the process is a User process by utilizing the OpenProcessToken.
[Code]...
I am trying to make a start and pause button (and hence continue) to start, pause, and continue my program. The start button works but the pause button does not. Can someone look at my code and see what the pause button needs to do to pause the program? I am using VB 2005. Here is my code.
[Code]...
Out of curiosity, is there a way i can make a program stop or pause for a period of time (which i would choose) before continuing the code WITHOUT a timer.I think I've seen this done before, but I'm not positive.Also note that I'm talking about a forms application (not a console app if that would be any different.)
View 3 RepliesHi. what is the difference of sleep function and pause function (using timer) between a loop.
View 12 RepliesI currently have the following up in VS 2010
Dim myProcess() As Process = System.Diagnostics.Process.GetProcessesByName("calc")
For Each myKill As Process In myProcess
myKill.Kill()
However I cannot seem to get it to kill more than one process. Example I've tried
("calc",mspaint")
("calc,mspaint")
("calc"),("mspaint")
For some time ago i have notice that my App on every start make a call to csc.exe and starts it. I know for sure that that did not happened before and I can not find out why this is happening now, or better to say: what did I do in code to make this happened? I have google-it and found out that csc.exe is some kind off on-the-fly compiler for C# (If I understand it correctly ) but my App is in VB.net so I am a bit confused. Can someone explain it to me in general what have I did in my VB.NET code to make my App on every start calls csc.exe?
View 17 Repliesim making a task manager and want to get cpu usage of a process this is how my code looks now
For Each proc As System.Diagnostics.Process In pList
Dim lstStuff As ListViewItem = New ListViewItem()
lstStuff.Text = proc.Id.ToString
[code]....
everything works but the cpu part it returns values over 100%?
is there a way to only get the processes that are shown in taskmgr?
The reason for this is because taskmgr hides some task on vista because you have to be admin to see all of it.
i have a small issue while developing a windows application using VB.Net . i will explain the scenario here. My application contains one form which has two tab buttons. say tab1 and tab2. In tab1, i have an option to download data from various sites. this takes few minutes. lets say 15 minutes. and in tab2 i have an option to view the logs. my problem is i am unable to click the tab2 unless and untill the downloading finish. my doubt is how to do more than processes at the same time. if i am right we need to use threading concept here.
View 1 RepliesI have a need to search for a specific process in task manager and attach (dock) my application to the window for that process. I have this working just fine. The problem I'm having is that sometimes this process may be running more than once (for example: running two Internet Explorers would put two iexplore.exe entries in Task Manager).
Is there a way to get the one that was opened first? I'm not sure how they get "sorted" in the Process list, but currently I am retrieving the first occurrence of the process and docking to it, but I'm finding that it isn't always the correct one. How can I make it always dock to the process entry that was opened first?
[Code]...
I'm building my first application in VB2010, this application consists of running 3 different programs; one after the other. I use a progress bar for task progress. My question is on how to make the application go to the next program after finishing with the previous one? Here is some of the code:
Private Sub Timer1_Tick_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
ProgressBar1.Increment(1)
If ProgressBar1.Value = 3 Then
[code]....
I'm working on a Parental control
I have 3 questions:
1) How to detect a starting process -
Solved here
2) How to capture a copy of the process and look in all controls from all forms to see if the Text/Items property has offensive keywords
3) If yes, how to close them immediately. - myProcess.kill
Write your code as efficient as you can to reduce CPU load, to consume less energy and protect our planet from global warming.